2013 Ford Edge

Defect. Ford Motor Company (Ford) is recalling certain model year 2012-2014 Ford Edge and Lincoln MKX vehicles manufactured September 2, 2010, to November 30, 2013; 2013-2014 Ford Taurus and Lincoln MKS vehicles manufactured August 25, 2011, to November 30, 2013; and 2013-2014 Ford Flex and Lincoln MKT vehicles manufactured September 12, 2011, to November 30, 2013. In the affected vehicles, the halfshaft retention circlip may not have been properly installed, and as a result, the halfshaft may move outward and disengage from the linkshaft while driving and without prior warning.

Risk. If the halfshaft and linkshaft become disengaged while driving, power will no longer be transmitted to the wheels, increasing the risk of a vehicle crash. Additionally, if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in 'Park', increasing the risk of injury to exiting occupants and bystanders.

Remedy. Ford will notify owners, and dealers will inspect the vehicles to make sure that the halfshaft is properly retained. If it is not, dealers will replace the linkshaft and also replace the halfshaft if it shows evidence of spline damage, free of charge. The recall began on August 4, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S10.

Defect. Ford Motor Company (Ford) is recalling certain model year 2012-2013 Edge vehicles manufactured from September 2, 2010, through April 25, 2013, and equipped with 2.0L engines. The fuel line pulse damper metal housing may crack as a result of an improper manufacturing process. A cracked fuel line pulse damper housing may result in a combination of fuel odor, weepage, or a continuous leak while the fuel system is pressurized.

Risk. A fuel leak in the presence of an ignition source may result in a fire.

Remedy. Ford will notify owners, and dealers will replace the fuel line with one that does not have a damper, free of charge. The safety recall began on February 25, 2014. Owners may contact Ford at 1-866-436-7332. Ford's number for this recall is 13S13. IMPORTANT: This recall supersedes recall 12V-438. All vehicles that have been remedied under the previous recall need to have the current remedy applied.

The Office of Defects Investigation (ODI) opened this investigation on September 28, 2016 based on allegations that the door ajar light located on the instrument cluster stays on all of the time even when all doors are closed and fully latched on 2011-2013 model year Ford Edge vehicles.When the light is illuminated continuously, vehicle occupants cannot be certain if any of the doors are properly latched.Reported safety consequences as a result of this issue include doors opening while driving (because doors were initially not latched properly), doors cannot be locked while driving, and the …

Certain 2010-2014 Model Year Edge and MKX Vehicles - Extended Warranty Coverage on Brake Booster

Certain 2010-2014 Model Year Edge and MKX Vehicles - Extended Warranty Coverage on Brake Booster

Customer Satisfaction Program 19N09 Certain 2011-2014 Model Year Edge and MKX and 2013-2014 Model Year Explorer, Flex, and MKT Vehicles Left Front Door Latch Extended Coverage

FORD/LINCOLN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION REGARDING EXTENDED WARRANTY FOR COVERING ACCESSORY PROTOCOL INTERFACE MODULE REGARDLESS OF MILEAGE. MODELS 2011-2013 EDGE, EXPLORER, MKX, FOCUS, ESCAPE, FLEX, FUSION, TAURUS, MKS, MKT, MKZ, F-150, F-SUPER DUTY. *PE

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label …

Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive …

Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event …

For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery …

Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda …

SIRI EYES FREE FUNCTIONAL ISSUES USING BLUETOOTH AND APPLE IOS 9.2 AND 9.2.1

The rear view camera intermittently does not work. It is unsafe to rely on it for reversing, and fails me for a state inspection in Maine. I had brought it to the dealer, and they stated other models have a recall for this, but my VIN is not listed. It does not give a warning, when it does not work the screen goes black and says 'camera unavailable, see dealer ' This quote is 863.31 before taxes

The brake pedal suddenly became extremely stiff, accompanied by a hissing sound when the brake pedal was applied. The vehicle does not stop normally or immediately after the brake pedal is pressed, creating a serious safety concern. The vehicle was inspected by a Ford dealer, who recommended replacement of the brake booster and master cylinder. The dealer also recommended replacement of the ECU and hydro unit associated with the braking system. However, Ford has reportedly informed the dealer that the required ECU is not currently available. I have found several complaints from other owners describing similar brake-related symptoms, including a very stiff brake pedal, hissing noise, and reduced braking effectiveness. Despite these reports, Ford has not adequately addressed what appears to be a potentially serious and recurring safety issue. A sudden loss or significant reduction of braking assistance can substantially increase stopping distance and may result in a collision, particularly in an emergency situation. This is a serious safety concern for the occupants of the vehicle and other road users. I am requesting that NHTSA investigate this issue and determine whether there is a safety defect affecting these vehicles. I also request that Ford be required to provide an appropriate and timely remedy for affected vehicles, including vehicles for which replacement parts are currently unavailable.

The brake booster has gone out and the car don’t want to stop

The back up camera is inoperable at times. Rarely works on hot days or anytime the rear of the EDGE is facing the Sun. It hasn't worked properly for years. I'm not sure of the exact date or mileage it first happened, but it definitely started acting up around 2019.

The car did not brake randomly back in may when I was picking my toddler up from school. I contacted Ford dealership and they said braking issues is a known issue with the edge but my vehicle has no recalls. I could pay almost $300 for a diagnostic fee but nothing would be covered because their was a recall for the brake booster but that was back in 2013-2014. So I went to brakes plus, first they replaced the master cylinder then they replaced the brake booster a week later. Here I am 3 months later and the same issue.The vehicle randomly did not brake AGAIN. Got the vehicle back to brakes plus to have the vehicle looked at again. They replaced the brake booster under warranty then reached out to Ford who let them know the brake booster and brake lines are a know defect with the vehicle and I can have my vehicle looked at by them but I would need to pay the fee and nothing would be covered . How is this a known issue and nothing is covered? Ford checked my Vin and no vehicle recall. I reached out to Ford corporate and they created a case number: Cxh-09196123-F6m4z3 I am pregnant and I feel this car is dangerous if this is a known issue.

The contact owns a 2013 Ford Edge. The contact stated that while driving at various speeds and attempting to decelerate or come to a complete stop, there was an abnormal sound while depressing the brake pedal. The brake warning light was illuminated. In addition, the contact stated that while in reverse, the rear-view camera displayed an upside-down image. The vehicle was taken to a local dealer where it was diagnosed and determined that the power booster brake hose needed to be replaced. The vehicle was not repaired. Upon further investigation, the contact associated the failure with an unknown recall; however, the VIN was not under recall. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 100,000.

Just purchased this used vehicle from Orange Auto Connection in [XXX] on XXX. Car was in perfect operating condition. 2 days later while driving with my 2 granddaughters I was approaching a stop sign at about 35-40 mph and as I started to push on the break pedal it became very soft and pushed all the way to the floor with no resistance. I thought the car wouldnt stop,. Thankfully it did without an accident . It has not returned to the normal breaking conditions. Today is XXX. I have to drive this car everyday as it is my only vehicle. I didn't buy an extended warranty from the dealer because I couldn't afford it. Why has this issue not become a safety recall. If I had known about this problem that has apparently been addressed years ago and had just expired in November 2025 prior to buying this car I wouldn't have purchased it. They are a lot of people including myself that live check to check and still struggle with every day necessities and potentially being faced with a heafty repair bill to fix a dangerous fault that manufacture knew about really causes sleepless nights and undo stress that they should not have to endure because they are afraid they will be hurt or hurt othera in an accident caused by a manufacture defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

While driving on the highway at 70 mph, the driver's side front halfshaft completely detached from the vehicle, causing an immediate loss of drive power and creating a severe crash hazard."

The backup camera will flip upside down or go completely blank or not work at all. I had my car in reverse and the camera didn’t come on and one time I flipped upside down and now it don’t work at all.

The contact owns a 2013 Ford Edge. The contact stated that while driving approximately 30 MPH, the brake pedal was inoperative. The contact stated that the vehicle drove for several yards, and the contact was unable to reach the parking brake. The vehicle was shifted into park(P) to attempt to stop the vehicle. The contact stated that the vehicle crashed into the shrubs in front of the window at an independent mechanic shop, causing the vehicle to come to a stop right before almost crashing into the shop window, which resulted in minor damage to the front bumper. No warning lights were illuminated. The air bags were not deployed. An independent mechanic diagnosed the vehicle and stated that the brake pads and rotors needed to be replaced. The vehicle was repaired; however, the failure persisted. The vehicle was taken to another independent mechanic, where it was diagnosed and determined that the brake booster module needed to be replaced. The vehicle was repaired; however, the failure persisted. The contact researched and was made aware of an unknown recall; however, the VIN was not included. The failure had occurred on several occasions. There were no injuries sustained. A Police report was not filed. The manufacturer was notified of the failure. The failure mileage was approximately 78,000.

When I put my 2013 Ford edge in reverse the backup camera goes out for about 5 to 10 seconds or it just doesn’t work at all. And also I just paid $672 to have the drivers side door latch replaced because the recall had expired in November of 2025 the door ajar light would stay on and the dash would say place vehicle in park

The Gas Cap is defected the light always comes on and you have to pump gas a certain way.

Back up camera displays upside down image when vehicle is placed in Reverse making it extremely difficult to determine images pertaining to the safe operation of my vehicle while performing backing up or checking for obstacles; i.e. pedestrians, pets, bicycles, nearby vehicles or other objects that can cause damage to my vehicle. My vehicle was purchased in 2025 and was informed that this has been a known issue by Ford but a recall has not been issued yet.

Frequently, when the car is in reverse, the screen which shows the image from the backup camera goes blank while backing up. The screen typically stays blank for approximately 5 seconds and then comes back on. Sometimes I have to place the shifter in “park” and then return to “reverse” to get the screen to display the image. I have received a letter from Ford Motor Co. which describes the stated condition and offering to repair free of charge for vehicles that are not older than 15 years. However, the letter references only my 2015 Ford F150. I called the local dealer to see if my 2013 Edge is covered under the recall and the dealer stated it is not covered. Since my Edge is less than 15 years old I think Ford should have to cover all Ford vehicles which have the stated problem.

The backup camera flips upside down when I try and reverse and or an error message pops up

I am filing a consumer complaint against Ford Motor Company regarding a known, severe safety defect in my 2013 Ford Edge 3.5L AWD. The internal water pump has failed, leaking green coolant onto the ground and threatening catastrophic engine failure. Ford designed this vehicle with an internal water pump that dumps coolant into the engine oil when it fails, hiding the defect from consumers until the powertrain is destroyed. Furthermore, the All-Wheel Drive Power Transfer Unit (PTU) is overheating due to a design that labels the fluid 'lifetime' and prevents standard servicing. I purchased this vehicle for $14,400 and have invested $4,000 in maintenance, and I am seeking state consumer protection advocacy regarding Ford's deceptive engineering practices."

I drive a 2013 Ford Edge. It's getting the same error on the rearview camera that many other Ford vehicles have had recalled.

The safety system back up camera has been malfunctioning for 18 months. At times the image will be inverted, at times it will appear to be zoomed in very close, but most of the time it does not work at all. The alerts (beeping) that should be occurring when identifying a hazard do not work. The horn no longer works. Several times the entire electrical system will shut off and then reset. There have not been any warning lights on the dash to indicate why this is happening. My vehicle has not been examined by a dealer or independent service center.

On the 2013 Ford edge I own the backup camera fails frequently and without warning. Sometimes the camera will not work at all when the transmission is placed in reverse, other times the camera will fail while during the process of backing up. Problem - does not work at all: When the car is placed in reverse the camera projects a blue screen then states the camera is not available, this happens when it does not work at all. Problem - shuts down while in use: Turns off while in use, one has the rear camera view when backing up, then the camera does one of two things it flips flops (top to bottom) or flashes a blue screen then states the camera is not available. And then sometimes the camera will work for one to three times (the camera is working while backing up, turn the vehicle off, exit / re-enter the vehicle and it works for backing up, but the next time the vehicle is entered and placed in reverse the camera is not working at all and the message reads camera is not available. This has been occurring on a more frequent basis over the last month

I am submitting this letter to report a serious safety defect involving the brake system on my 2013 Ford Edge (VIN: [XXX]). The vehicle is experiencing a brake failure consistent with known ABS/HCU pump issues that have affected similar Ford Edge model years. On XXX, the vehicle was inspected at Randall Reed’s Planet Ford 635 in Garland, Texas. Service Advisor Luis Rodriguez confirmed the brake concern and provided a repair estimate of $3,500. The dealership indicated that the failure is related to the ABS/HCU system. The symptoms include: A spongy brake pedal Inconsistent brake pressure Reduced braking effectiveness Increased stopping distance Unpredictable brake response These symptoms match those described in Ford Recall 16C10, which addressed ABS/HCU pump failures on certain 2012–2014 Ford Edge vehicles. Although my VIN is not included in the recall, the failure pattern is identical and presents a clear safety hazard. I have contacted Ford Motor Company multiple times, including through executive escalation channels, but I have not received a response or assistance. Given the nature of this defect and its similarity to a previously acknowledged safety issue, I believe this may indicate a broader pattern that warrants investigation. I respectfully request that NHTSA review this matter to determine whether the existing recall should be expanded to include additional VINs or model ranges affected by the same ABS/HCU defect. Thank you for your attention to this safety concern

The contact owns a 2013 Ford Edge. The contact stated that while driving at 25 MPH, the brakes failed, and the vehicle coasted to the side of the road. There was no warning light illuminated. The contact stated that the failure was recurrent. The dealer was notified of the failure, but repairs were pending due to parts unavailability. The manufacturer was not made aware of the failure. The failure mileage was approximately 226,424.

The brakes on my 2013 Ford Edge failed with no notice. Luckily I was able to coast into a parking lot to get stopped. Even pushing the brake pedal to the floor will not stop the car. We immediately and safely took the car to our local repair shop who confirmed we needed 2 ABS parts to fix the car. That was Oct, 2025 and as of today (June 10, 2026)the parts are still not available to order. I have checked with 3 Ford dealers in 3 states and all say the same thing. They can't order the parts to fix my car and say over 1,500 are on back order. The car is undriveable with no brakes and creates a major safety risk. I have heard some dealers got Ford to provide a rental car. It is becoming a financial burden not having a car to drive for 10 months and Ford doesn't seem to have put out any recall or offer any help.

The rear back up camera stopped working , goes black or flips upside down. Sometimes even flickers and then says contact your local dealer for assistance.

The rear backup camera is distorted and the image has flipped upside down

The backup camera glitches repeatedly. Have to put in park then reverse and repeat until it displays. When it is producing the error, the alerts are not received to assist with alerting the driver of any potential hazards and you are unable to see due to camera not working. Also, happened in our 2014 Ford Escape. Although I paid the dealership $600+ to replace it. Now receiving a notice for my 2017 Ford Edge regarding the malfunctioning camera and wondering why either of the other vehicles were not included in this recall.

245/50R-20 pirelli scorpion weather active xl. Unknown cause. 5/22/2026 found bulge in passenger side front tire outer sidewall. Tire can be kept for inspection

I have replaced all brake components except abs motor. After researching online this vehicle has same issues as stated with other models . Brake pedal goes to floor after spending $3500!

I am reporting a safety issue involving a 2013 Ford Edge Sport AWD related to progressive brake failure. The affected components include the brake booster and master cylinder. The vehicle remains available for inspection upon request. In mid-2025, the vehicle developed a gradual loss of braking capability. The brake pedal required increasing force over time to bring the vehicle to a stop. Because the failure developed progressively rather than suddenly, the severity of the issue was not immediately apparent. At the time, the vehicle was primarily driven by my teenage son, a new driver, who continued operating the vehicle by pressing the brake pedal harder to compensate. This created a significant safety risk, as the vehicle did not reliably stop under normal braking conditions, increasing the risk of collision. The issue was confirmed by an independent mechanic, and repairs required replacement of the brake booster, master cylinder, and related components. The vehicle was later discussed with a Ford dealership; however, no warning of coverage or recall applicability was identified at that time. There were no clear warning lights or dashboard messages indicating brake system failure prior to the issue. The primary symptom was a progressive increase in required pedal force. After the repair, I learned that brake booster failure is a known issue for this vehicle platform and has been the subject of prior manufacturer service campaigns. I am concerned that this type of gradual br

The contact owns a 2013 Ford Edge. The contact stated that while driving at an undisclosed speed, after being cut off by another driver, the contact attempted to make an emergency stop; however, while the brake pedal was depressed, the brake pedal went to the floorboard, extending the braking distance. The vehicle failed to stop as intended, increasing the risk of a crash. The dealer was notified of the failure, but the vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 125,000.

On Dec 11, 2025, the driver’s heated seat in my 2013 Ford Edge overheated within minutes of activation, causing first- and second-degree burns to the occupant. The vehicle was inspected on March 18, 2026 and escalated for management review, but the manufacturer failed to provide the promised follow-up by March 26, 2026, and the defect remains unresolved, posing an ongoing risk of injury. No problems prior to ever using the heated seats.

The panoramic sun roof exploded while going down the highway sending glass flying in the air. The sunroof shade was not open so the driver and 2 infants in the back seat were not injured. I contacted Ford Motor Company and was given a case number CZH-03059174. They directed me to turn it in to my insurance company which I did not do. I took the vehicle to the body shop, they found a replacement and installed it for less than my insurance deductible.

Back up Camera goes in and out, it's flips upside down and do wired things , it also say call dealership, the picture sometimes be in reverse , and brake light stays on have to pump brake in order for it to go off.

1. My safety system/camera system is no longer working properly. The screen displays either a black/blank screen, an inverted (upside down) image, or an image that appears to be zoomed in to a very small viewing area. The alerts (beeping) does not function consistently when backing up. The horn does not always work. At times the entire electrical display including the sound system will reset without prompting. The back door hatch will actively close even when there is something in the opening. 2. Safety is at risk because the video system is in place as a secondary alert system to prevent accident or injury. The horn is a necessary item. If the electrical system should reset during operation this could cause an accident. The rear hatch could cause injury if it does close. 3. These issues have been witnessed by other people, but not in a dealership or service center because these places charge outrageous fees. 4. No inspection done by manufacturer/police/insurance. At time of state regulated inspection all aspects pertinent to that were functional 5. These issues began over a year ago with camera malfunction, the other issues have become present throughout that time.

Starting about a year and a half ago, my backup camera would either say “camera is unavailable, contact dealership” or be upside down or some sort of distorted image. Sometimes the camera works. It poses a risk to me and others.sometimes the camera will cut out and go black after I have started backing up with it. No other warning lights have come on. Other ford edges have been recalled for the same issue but not the 2013.

Breaks went out on car.started out only when I hit a bump I’d loose them… turn car off and pump them back… now they are just gone! Replaced pads rotors calipers, now changing master cylinder.. from what I’ve read that won’t help but have to try! They should really put a recall out for this!

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the camera was inoperable. The contact referenced NHTSA Campaign Number: 25V572000 (BACK OVER PREVENTION); however, the VIN was not included in the recall. The vehicle was driven to a dealer. The vehicle was repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 141,000.

My backup camera continues to not work sometimes it shows upside down or black screen and says I need to contact the dealership. When I contact the place that I got it from it says it's not covered under their warranty in the contact Ford. When I contact Ford they said there was some rear backup camera thing going on and that the recall had not been issued yet?

I have several different things going on. First of all my rear turn signals do not work, nor do my rear hazard lights. I've taken it to a mechanic who has extensively looked at this and has determined that it's the body control modular and is suggested replacement. I have been waiting for several months for this part to come in but he keeps telling me it's on back order. Also, my radiator fan/assembly went bad and had to be replaced. Upon the mechanic installing the new fan assembly, I had numerous fuses blown and that is when my blinker and hazard light issue started. This is a major safety concern as signaling the direction that you're turning is very important to other drivers. Additionally, it is against the law not to use signals. I'm constantly in fear that someone is going to rear in me because of my inability to signal when switching lanes and or turning. Additionally, my back up camera stopped working shows a black screen with a notice to contact the dealer. Another issue I have is that my door ajar light is illuminated all the time. I often feel unsafe and fear that the door may just come open at any time, I am unable to lock my doors with the internal lock , which means my doors are left unlocked while I'm in the vehicle. Also, the interior lights stay on for awhile when car turned off, thus putting more strain on the battery, which I've just replaced. Plus, the dome light will not go off until you accelerated to about 20 mph, however, when putting the car in rever

The airbags did not deploy when the car was in a front and rear end collision on 2/12/26. Injuries occurred. No one has confirmed the problem. The car was taken to a Collison center to be evaluated but am uncertain if that part has been evaluated. There were not symptoms of failure beforehand.

The brake booster went out first, replaced the brake booster and master cylinder, 2 calipers, brake pads, and rotors. The next option was to replace the brake lines. The problem was not solved; the calipers still locked up.

I have a 2013 FORD Edge that the ABS module has gone out deeming the vehicle unsafe to drive. We have spoken to several FORD dealership team members and have all stated that the part should be recalled and the part is unavailable until sometime next year or later. We were told by FORD customer service, that in order to escalate the issue, then we needed to take to a dealership. We dropped the car off and never heard back from anyone and finally after many attempts to contact the dealership, I was finally able to get a team member on the line. They then tell us until we pay the diagnostic fees, they can't do anything. We were never told that from the start of the initial call and are back to square one. The car has no anti-lock brakes and is deemed unsafe to drive, please assist in anyway possible.

The ABS Control Module failed in my 2013 Ford Edge. I no longer have anti-lock brakes and my wife does not feel safe driving the car. I talked to a number of different Ford Dealerships and every service technician I talked to told me they don't know how this issue is not a recall as it is happening so often that the part is back ordered by a year. I had the problem confirmed by in independent service center and was informed to bring to a Ford Dealership. The vehicle is now at a Ford Dealership awaiting diagnosis but they all said they know what the problem is and they can't get the part. There are multiple warning lamps going off when you start the vehicle. ABS warning lamp, service advancetrac lights and brake warning lamps. This issue just popped up and we brought to an independent service center to get fixed and they were aware of this issue and told me that you can't get the part and to contact Ford. They also told us that if you push the brakes too hard it could cause them to lock up which is a huge safety concern and now my wife will not drive the vehicle and I can not sell it to anyone like that so we are stuck. Please help.

This is on a 2013 Ford Edge with Adaptive Cruise Control. The brakes failed and went completely to the floor, putting the driver/passengers at danger along with other vehicles in the vicinity. The ABS control module with HCU is the part that failed. Ford part # CT4Z-2C405-A. Per the dealership and per Ford, this part is now obsolete and unavailable, which means the vehicle is currently unsafe to drive and unusable. Ford does not have any plan at the moment to correct this issue.

The brake booster had a recall but it should have never just have been the booster. The brake system on this is dangerous. I had the booster replaced and the valve got stuck in the HCU and cause brakes to fail. This has been a common issue amongst people and yet this is not a recall. The dealership just quoted me $3200. That's absurd for an issue thats obviously a common huge problem for people

Soft brake pedal that goes to floor

Climate control system turns off automatically without driver input. This causes loss of heating or cooling while driving and requires repeated manual reactivation. Issue occurs randomly while driving and has happened multiple times. Restarting the vehicle does not consistently resolve the problem.

Rear backup camera constantly displays an inverted (upside-down) image and the picture quality becomes unclear/blurry. This makes it difficult to judge distance and orientation when reversing and creates a safety risk when backing up.

The vehicle’s touchscreen activates functions on its own without being touched (“ghost touch”). While driving, the screen intermittently selects menus, changes settings, and activates features without driver input. This causes distraction and requires the driver to look away from the road to correct unintended changes. The issue occurs unpredictably and repeatedly, while in motion and standing still, indicating a malfunction of the touchscreen or related electronic system and presents a safety concern due to driver distraction.

Driver door says Ajar even when shut, inside lights stay on. Fuel indicator says Ajar stays on. Backup camera shows upside down

While driving the car approaching a stop the brake pedal suddenly went almost all the way to the floor. Had to press the brake multiple times to come to a complete stop. It is unsafe when traveling in traffic and unable to slow down fast enough to stop the vehicle which can cause an accident. The vehicle has not been inspected. Contacted a mechanic and described the issue and stated this sound like a master cylinder issue and it is unsafe to drive. This issue did not present warning lights or message to indicate there was anything wrong. We have read many similar complaints online. We believe Ford should fix this issue.