2017 Jeep Wrangler

Defect. Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.

Risk. A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.

Remedy. FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.

Defect. Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.

Risk. A vehicle stall can increase the risk of a crash.

Remedy. Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.

Defect. Chrysler (FCA US LLC) is recalling certain 2017 Dodge Caravan and Jeep Wrangler vehicles. The brake switches on these vehicles may malfunction, keeping the brake lights illuminated and/or allowing the vehicle to be shifted out of the PARK position without the brake pedal being pushed.

Risk. Having the brake lamps continuously illuminated or being able to shift the vehicle out of PARK when the brake pedal is not pressed (and the ignition is in the RUN mode) can increase the risk of a crash.

Remedy. Chrysler will notify owners, and dealers will replace the brake switches, free of charge. The recall began March 22, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U09.

Defect. Chrysler (FCA US LLC) is recalling certain model year 2017 Jeep Wrangler vehicles manufactured November 1, 2016, to November 3, 2016. The affected vehicles may have a fuel tank that has a cracked or broken control valve, possibly resulting in a fuel leak in a rollover event, debris in the fuel tank and/or the potential of over fueling the vehicle.

Risk. A fuel leak in the presence of an ignition source can increase the risk of a fire.

Remedy. Chrysler will notify owners, and Jeep dealers will inspect the fuel tank and replace fuel tank and sending unit, as necessary, free of charge. The recall began January 12, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S90.

Defect. Chrysler (FCA US LLC) is recalling certain model year 2016-2017 Jeep Wrangler vehicles manufactured June 16, 2015, to August 14, 2016. In certain crash conditions, the front impact sensor wiring may be pulled until it detaches before a signal can be received by the Occupant Restraint Controller (ORC).

Risk. If the ORC module does not receive a signal from the front impact sensor, both frontal air bags and the seat belt pretensioners will not deploy in the event of a crash, increasing the risk of injury.

Remedy. Chrysler will notify owners, and dealers will reroute the front impact sensor wiring and relocate the impact sensor branch, free of charge. The recall began on November 10, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S76.

The first time happening I was driving on the interstate going about 70 miles an hour in the dark, the car completely shut down with no warning I was able to coast then tried to restart the vehicle and it started. I was able to get off the road and to my destination. The second time this happened, it was 5am in the morning getting on the interstate going about 40 miles an hour I got to the end of the ramp and merged into traffic again no warning the car shut down. This time the vehicle would not restart. I was able to coast to the shoulder with traffic approaching on me. Had to wait for a tow in the dark by myself.

ABS system module has failed and the manufacturer has it on indefinite backorder. I read reports of some customer waiting over 400 days for this part. It compromises the effectiveness of the antilock braking system. How do they get away with this?

My ABS module is confirmed faulty resulting in an unsafe car to drive. The ABS module is extremely hard to come by, on an indefinite backorder, and I cannot get the part anywhere. Maybe people waiting over a year for the part. This is resulting in aftermarket or refurbished parts, which are risky and unsafe. I am out of a vehicle because I cannot get the part and no one wants to buy a faulty car.

During a routine maintenance visit, a pre-purchase/general inspection was performed on my 2017 Jeep Wrangler, which documented the front axle and differential housing as intact and in one piece. Subsequent to that inspection, while the vehicle was undergoing service, it was discovered that the front axle housing bracket on the driver’s side had fractured and separated from the frame mount. Upon inspection of the fractured surface, the break exhibits oxidation (rust) at the fracture point itself, indicating the crack had been forming and propagating over time rather than resulting from a single acute impact or event. This suggests a pre-existing metal fatigue or corrosion-related structural weakness in the front axle housing bracket assembly that was not visually detectable during a standard inspection prior to full separation. Given that this is a structural component connecting the front axle/differential to the vehicle frame, a full separation of this type could result in loss of vehicle control, particularly under steering or load stress, and poses a significant safety risk. The vehicle is approximately 9 years old with 90,000 miles, and this type of structural failure at this age/mileage is a concern for other owners of similar model year Wranglers. I am filing this report to make NHTSA aware of this failure mode in case it represents a broader pattern in 2017 (and potentially adjacent model year) Jeep Wranglers.

ABS MODULE HAS FAILED VIN [XXX] No ABS and no cruise control The ABS module is on back order and cannot be purchased by OEM. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Oil cooler split due to warming up and cooling down in winter and being made of plastic All brake calipers needed to be replaced on it too

The contact owns a 2017 Jeep Wrangler. The contact stated that while traveling at 60 MPH, the vehicle struck a deer. The airbags failed to deploy upon impact. No injuries were reported. No police report was filed. The vehicle remained operable and was driven to the residence. Two days later, the airbag warning light illuminated. The manufacturer was notified and confirmed there were no open recalls or active warranties for the vehicle. The contact was then referred to the NHTSA Hotline to file a report. The vehicle had not been repaired. The failure mileage was approximately 140,000.

Front brake caliper became loose, moved away from the rotor, resulted in the caliper grinding against the inner wheel. Inspection by mechanic revealed missing caliper mounting bolts on both driver and passenger side of brakes. Front caliper mounting bolts were replaced with OEM-spec hardware, torqued to spec, with blue Loctite added to threads of fasteners. The mechanic noted many well-documented failures of the same nature on Jeep JK, JL, and Gladiator models, although no formal recalls have been issued.

The battery terminals will stop tightening, which made me think it was fully tightened. I wiggled them from side-to-side and they didn't move. As I was driving, the vehicle died, which almost caused an accident because the steering wheel locked. I was able to get the vehicle to a safe stop and hook up a jump pack to it. I then discovered that my negative battery terminal wasn't even on the battery post. It slipped off when lifted UP but didn't move AT ALL when wiggled side-to-side. I am unable to find the proper OEM replacement battery terminals at this time.

My 2017 Jeep Wrangler experienced repeated brake system failures beginning shortly after purchase. After extensive brake repairs, the vehicle was ultimately diagnosed with a failed ABS control module. The vehicle is unsafe to operate due to loss of ABS/stability safety systems. Jeep/Stellantis has the required OEM module on national backorder with no repair timeline (some other jeep owner reports say it has been on backorder for up to 18 months), reportedly under engineering review. Dealerships and mechanics indicate this issue is widespread among Jeep Wranglers. The inability to obtain a safety-critical brake component leaves the vehicle effectively unusable and unable to be safely repaired (has been undriveable since Feb 11 2026).

The motor of the wiper stop working.

Oil plug in engine gets brittle and fails by cracking. This cause a complete engine failure with only 36k miles on it. Mechanic says this is a known issue. I could not operate the vehichle and broke down without warning. I have a reciept for the nrand new engine.

A deer jumped in front of me and the brakes locked up. The jeep spun 180 degrees before it stopped. Nothing was damaged and I traveled on. About a week later the ABS and traction control lights started blinking. Within a day they were solid and the cruise control stopped also. I researched and found the speed sensor was a common problem. I carried it to a ASE certified mechanic for the sensor to be replaced. The sensor was replaced but the lights didn’t go out. It was put on the computer and noted it was the ABS CONTROL MODULE part number 68259556AD. The problem is that the part is in such demand that it will take months to get it. So this seems to be a recurring issue for jeeps. I am now riding with no ABS because MOPAR can’t keep up with the demand.

For about 6 months now, the abs control module has been bad. Leaving every light regarding braking on the dashboard and no safety features, such as abs, skid control, ect ect . The parts for this have beem on back order over a year now and there are tons of people experiencing the same issue as I. My vehicle only had 63000 miles when it failed. ( code c2200, abs internal failure) . Many people have experienced failure with way less miles. This is not a use failure, but rather a factory defect as these are a known issue. There needs to be a safety recall on the module and have it replaced. Thank you

Recent ABS module failure w C2200 code. Took to Chrysler/Jeep dealer for repair and was told replacement module part is unavailable with up to and more, a year backorder. Was advised there was nothing they could do to repair. Researched other dealers and suppliers with same results. This is certainly a safety concern as this ABS module failure appears to be a common failure in Jeeps of this and adjacent model years and there is nothing a dealer or any other service firm can repair due to part availability.

The fenders front fenders become loss due to faulty plastic clips and flights off while driving once the wind catches under them. Very dangerous to other cars. Also the windshields crack around once a year and you have to really be-careful to stay back from any auto that might throw a rock, but you can’t avoid someone passing you.

The contact owns a 2017 Jeep Wrangler. The contact stated that while driving approximately 30-45 MPH, the vehicle lost power. On another occasion, while driving at 20 MPH, the vehicle lost motive power. While shifting into gear, the vehicle failed to respond as intended. The check engine warning light illuminated after the failure. The driver was able to pull over safely. The vehicle was running, and the heat was functioning. The vehicle was towed to a AAA Service Center, where the filter and oil were changed; however, the failure reoccurred. The vehicle was towed to AAA again, but no assistance was provided. The vehicle was taken to the local dealer, where it was diagnosed, and it was determined that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 100,000.

I bought my 2017 jeep with 29,000 miles on it. I had an issue with the rear driverside brake locking up around 40,000 miles. I feel this is a safety issue due to how hot the brakes got and at times would be smoking. It being the weekend and my only vehicle, repaired myself for approximately $280. I have had to replace several coil packs around $50,000 miles. My main complaint today, at 66,000 miles it seems to be leaking oil. I took to mechanic this morning and was told this is a common problem with jeeps. The oil cooler housing is cracked and leaking. This part is made out of plastic. The repair for this is going to cost $1200 to $1500. I have read complaints regarding this issue and do not understand why this hasn't been recalled. This is a major safety concern and could possibly cause a fire. I have owned jeeps my whole life and as of today, I will never purchase another. The jeep brand has declined in reliability and has proved to be a huge financial mistake.

The ABS module in my 2017 Jeep Wrangler has stopped working 25 months ago and the display in on my dash warning lights glows constantly every time I turn the ignition on, even as I drive. This means my vehicle is lacking the safety features that are proven to help prevent accidents and as a result, deaths. I took it to the dealer immediately when the warning light presented in 2023. I was told the part in on back order and I'm on the list to receive a replacement asap. In the meantime, I have had several occasions with a very close miss from having an accident. The back order of this vital component causes great risk to me and my passengers, as well as anyone else near me on the road, despite my excellent driving record. The part is desired to reduce the chance of accident, so it's malfunctioning promotes the chance of an accident and needs to be addressed. I am one of thousands of customers experiencing this neglect. Please help.

The oil filter housing is made of plastic but holds hot oil, over time it cracks since plastic is not made to handle hot (oil) and cold (weather) cycles