2013 International Workstar

Defect. Navistar, Inc. is recalling certain model year 2013-2014 International ProStar and DuraStar trucks manufactured April 26, 2012, to April 4, 2013, WorkStar trucks manufactured April 27, 2012, to March 29, 2013, LoneStar trucks manufactured May 21, 2012, to April 2, 2013, and TranStar trucks manufactured April 30, 2012, to March 25, 2013. In the affected vehicles, the accelerator pedal position sensor can move and result in a high engine idle.

Risk. A high engine idle may make downshifting the transmission difficult and the engine brake may be disabled. These factors may hinder slowing down the truck when descending a long grade, thereby increasing the risk of a crash.

Remedy. Navistar will notify owners, and dealers will recalibrate the electronic control module (ECM) to allow it to recognize that the pedal is at the idle position, free of charge. The recall began on January 19, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15517.

Defect. Navistar, Inc. (Navistar) is recalling certain model year 2011-2015 International DuraStar, ProStar, TranStar and WorkStar, 2012-2015 International TerraStar, 2013-2015 International LoneStar and IC Bus HC, and 2014-2015 IC Bus AC vehicles. A vehicle double battery jump start or electrical load dump event could result in an overvoltage condition of a component within the HVAC system linear power module (LPM) which is used to control the blower speed. The overvoltage condition could result in the overheating and failure of the LPM.

Risk. If the LPM overheats and fails, there is an increased risk of a fire.

Remedy. Navistar will notify owners, and dealers will replace the LPM with an upgraded one, free of charge. An interim letter was mailed to owners on June 18, 2015. A second notification will mailed when parts become available. The recall began on August 6, 2015. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 15509.

Defect. Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International WorkStar vehicles manufactured March 16, 2012, to October 1, 2014. In the affected vehicles, the headlight low beam and ground circuits may have been reversed at the headlight connector resulting in reduced light output. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk. Reduced light output may impair the driver's vision, increasing the risk of a crash.

Remedy. Navistar will notify owners, and dealers will correct the wiring in headlight harness connector, free of charge. The recall began on December 29, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14525.

Defect. Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 International DuraStar vehicles manufactured November 2012 through December 2013, International WorkStar vehicles manufactured December 2012 through January 2014, and 2014-2015 International TranStar and International ProStar vehicles manufactured January 2013 through February 2014. The affected vehicles are built with air disc brake feature codes 04WEY, 04WEZ, or 04WZK. These vehicles may have an incorrect number of bolts mounting the brake caliper to the caliper mounting plate and some of the bolts may be improperly torqued.

Risk. If the air disk brake caliper has loose or missing bolts, the air disk brake caliper may come loose from the mounting plate causing the vehicle to pull left or right while braking and lengthening the distance needed to stop, increasing the risk of a crash.

Remedy. Navistar will notify owners, and dealers will replace any missing bolts and check the torque of all of the air disk brake caliper bolts, free of charge. The recall began on May 7, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 14508.

Defect. Navistar Inc., is recalling certain model year 2012-2013 International Lonestar, Paystar, Prostar, Workstar and 9900 trucks, equipped with feature code 0504501, 0504504, or 04EWM Reduced Stopping Distance (RSD) brake linings and with or without feature code 04WCS Greased For Life front air S-cam brakes. In the affected vehicles, the brake S-cam brackets may fracture.

Risk. S-cam bracket fractures may result in an inoperative brake on the affected wheel. This will cause the vehicle to pull to one side unexpectedly during braking and/or increase the stopping distance. Either result may increase the risk of a crash.

Remedy. Navistar will notify owners, and dealers will replace the S-cam brake assemblies with a brake assembly with cast spiders and S-cam tube bracket assemblies with reinforced gussets, free of charge. The recall began on March 27, 2014. Owners may contact Navistar at 1-331-332-1590. Navistar's number for this recall 14501. Note: This recall is an expansion of recall 13V231.

Defect. Navistar Inc. (Navistar) is recalling certain model year 2010-2011 IC bus 3200, model year 2012 and 2014 IC bus CE and model year 2011-2013 IC bus HC transit buses and model year 2008-2013 International 4300 and model year 2013 International Workstar commercial trucks equipped with Eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.

Risk. The increase in engine speed may result in unintended acceleration, increasing the risk of a crash.

Remedy. Navistar will notify owners and Eaton authorized service facilities will update the Hybrid Control Module Software version, free of charge. The recall began on May 28, 2014. Owners may contact Navistar at 1-331-332-1590.

Defect. Navistar is recalling certain model year 2011-2012 International Lonestar, model year 2012-2013 International Terrastar and model year 2011-2013 International DuraStar, ProStar, TranStar, and WorkStar commercial trucks manufactured from June 1, 2010, through March 7, 2012 and equipped with day cab codes 16CAB, 16030, or 16196 and feature codes 16WCE, 16WCR, 16XWD, 16XWE, 16XWV, 16XXB, 16XXD, 16XXE, 16XXG, or 16XYN sun shades. The sun shade may not be properly secured to the cab roof panel which may result in partial or full separation of the sun shade from the roof panel.

Risk. If the sun shade separates from the cab roof during vehicle operation, the sudden release of the sun shade could distract the driver increasing the risk of a crash.

Remedy. Navistar will notify owners, and dealers will inspect and strengthen the sun shade mounting, free of charge. The safety recall began on September 10, 2013. Owners may contact Navistar at 1-800-448-7825. Navistar's campaign number is 13505.

Defect. Navistar is recalling certain model year 2012-2013 IC Bus brand model 1300FBC, CE, HC, and RE buses; model year 2011-2013 International brand model Durastar, model year 2013 International brand Workstar trucks; model year 2013 Holiday Rambler brand model Ambassador and Endeavor vehicles; and model year 2013 Monaco brand model Diplomat and Knight vehicles. These vehicles were manufactured August 5, 2010 through September 6, 2012 and are equipped with certain 2011-2013 model year I-6 engines with feature codes 12NUK, 12NUL, 12NUM, 12NUN, 12NUP, 12NUR, 12NUS, 12NUT, 12NUU, 12NUV, 12NUX, 12NUY and 12NUZ. The injection pressure regulator (IPR) harness wire may break due to vibrational damage. This could cause an unexpected shut down of the engine.

Risk. An unexpected engine shut down while driving may increase the risk of a vehicle crash.

Remedy. Navistar will notify owners, and dealers will replace the IPR wire connector free of charge. The safety recall began on March 15, 2013. Owners may contact Navistar at 1-800-448-7825.

Defect. Navistar is recalling certain model year 2013 International brand LoneStar, ProStar, and WorkStar commercial trucks, manufactured from April 22, 2012, through October 29, 2012, and equipped with steering wheel feature codes 05CAW, 05CAX, 05CAZ, 05CBA, or 05WBD. The steering wheel may not have been completely welded to its mounting hub.

Risk. A steering wheel with an incomplete weld may separate from the steering wheel mounting hub, leading to a loss of vehicle control and increasing the risk of a crash.

Remedy. Navistar will notify owners, and dealers will inspect and replace affected steering wheels, free of charge. The safety recall began on November 21, 2012. Owners may contact Navistar at 1-800-448-7825.

Defect. Navistar is recalling certain model year 2011-2013 International vehicles manufactured from November 2, 2010 through May 25, 2012, equipped with Bendix air disc brakes. Bolts that fasten the air disc brake caliper to the caliper mounting plate may not have been tightended to their specified torque. This may cause the mouting bolts to become loose and possibly allow the air disc brake caliper to separate from the caliper mounting plate, resulting in an unexpected pull condition during braking application or an unexpected increase in stopping distance.

Risk. An unexpected pull condition during braking application or an unexpected increase in stopping distance, increases the risk of a crash, leading to property damage, personal injury, or death.

Remedy. Navistar will notify owners, and dealers will replace any missing caliper mounting bolts and tighten caliper mounting bolts, free of charge. The safety recall began on October 30, 2012. Owners may contact Navistar at 1-331-332-1590.