2017 Ram 3500 complaints

The contact owns a 2017 Ram 3500. The contact stated that while operating the vehicle, the ABS, traction control, and stability control warning lights remained illuminated. The cause of the failure was not yet determined, and the vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure. The contact was informed that the VIN was included in NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC ); however, the parts needed to complete the recall were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was 165,000.

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while operating the vehicle, the ABS and traction control warning light remained illuminated, with the cruise control feature was inoperable. The failure mileage was 92,000.

V06 Recall was attempted, but welding could not be done correctly - was told that was the "best they could do" truck continued to steer poorly (constantly have to hold the steering wheel to one side or the truck will veer out of the lane) bc steer ahead wrong, and to wear outer edge of the tires to an unsafe level in less than half the normal mileage. Now Dodge dealership/Stellantis claims the drag link assembly was permanently damaged by their prior recall work, and that truck cannot be aligned or driven safely but also won't fix it. They have been telling me they will action the case "today" or "one businesses day" since 27 Aug. I found out that the alignment and steering problem I had been spending money to fix since 2019 was a result of their poor recall repair and trying to get a response from Dodge Stellantis since AUG 06, and I have been without the use of the truck and unable to care for my horses since then. I have spent more than 14 hours directly on the phone with them without any action - my truck remains essentially impounded at the dealership. Est 20k miles at initial recall V06 failed repair attempt but their records should say. Current document is currently dealership that admitted the initial recall repair attempt damaged the draglink assembly beyond any hope of salvage/alignment.

The contact owns a 2017 Ram 3500. The contact stated that the messages "Service ABS System" and "Service Traction Control System" were displayed, and other unknown warning lights were illuminated intermittently. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while driving 70 MPH, the failure recurred, and the brake pedal was pulsating. The contact stated that it felt like the ABS was engaging and disengaging unintendedly, causing the vehicle to be pulled to one side. The contact was able to pull over to the side of the road. The vehicle was taken to an independent mechanic, where it was determined that the HCU needed to be replaced. The local dealer and several unknown dealers were contacted for the recall repair, but informed the contact the part was not yet available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 60,000.

The contact owns a 2017 Ram 3500 equipped with Nexen Tires, Tire size: 235/80/R17, Tire Line: Roadian ATX, DOT Numbers: 8EX6CMDL4517, 8EX6CMLL1616, 8EX6CMDR1017, 8EX6CMDL1017 and 8EX6CMCL1017. The contact stated while driving at various speeds, two of the tires exploded into pieces on different occasions. The contact was able to pull over to the side of the road. The vehicle was taken to a tire shop, where the tires were replaced. The contact stated that a third tire exploded while driving. The vehicle was taken to a tire shop, where it was recommended to replace all four tires because the tire brand and line was defective. The contact was informed that the tires were separating from inside out. The contact stated that the failure mainly occurred while hauling a camper. The manufacturer was contacted and advised the contact to install a gauge on each tire. The contact followed the manufacturer's instructions; however, the failure persisted. The contact filed a refund claim with the manufacturer and was informed that the claim was approved. The manufacturer advised the contact to destroy the tires and to send a picture of the destroyed tires. The contact followed the manufacturer's instructions but was later informed that the pictures were not received. The contact had not received a refund from the manufacturer. The tires were replaced with a different brand tire. The tires were original tires. The tire failure mileage was approximately 14,000. The vehicle mileage was approxi

Steering and/or front suspension developed into what is called a death wobble at 70mph. The steering wheel had so much hard wobble that it became almost uncontrollable to hold onto it, and keep the vehicle moving straight which put the vehicle onto the shoulder and into a shallow ditch. Has the problem been reproduced or confirmed by a dealer or independent service center? No, but when it happened previously, I had it looked at, and supposedly repaired. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No, there was no damage to the vehicle, but I am taking it back to the shop where the repair was supposedly made. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No, it came on suddenly.

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The manufacturer was made aware of the issue. The contact had not experienced a failure.

I am filing this complaint regarding the unavailability of a critical safety component for my vehicle. Multiple dealers have informed me that the part is not available through the Mopar parts chain. However, the identical part is currently available for purchase by consumers through MoparGenuineParts.com (111 Bond Street, Westbury, NY 11590) at the following link: [XXX] ). One verified buyer even confirmed this discrepancy. As [XXX] wrote in his 5-star review dated 04/03/25: *"ABS PART – Fixed my problem just what I needed. Dealership said they could not get to because of part shortage??"* This highlights a troubling inconsistency: Mopar’s authorized dealer network is unable to supply parts that consumers can easily purchase online. It makes no sense that the official supply chain is cut off while direct-to-consumer sales remain active. The component in question is critical to the safe operation of the vehicle. If it fails at high speed, the driver could experience sudden loss of braking or steering control. Such a failure poses an imminent danger of severe accidents, rollovers, or fatalities, both to the vehicle occupants and to others on the roadway. My concern is twofold: (1) why Mopar dealers cannot access parts that clearly exist in Mopar’s system, and (2) how long-term safety is being compromised if consumers must resort to inconsistent third-party availability for essential components. This disconnect directly threatens public safety. I respectfully request NHTSA inves

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the ABS warning light was previously illuminated. The vehicle was taken to Register Chevrolet, located at (14181 Cortez Blvd, Brooksville, FL 34613). While at the dealer for an oil change, the contact was informed that the ABS had failed and needed to be replaced. The ABS was replaced with an older model. The Chrysler dealer was contacted about the recall and informed the contact that the manufacturer was only providing one part at a time. The dealer was instructed to repair vehicles without the chassis cab attached first. The contact was informed that the part was not yet available. The manufacturer was made aware of the issue. The failure mileage was approximately 30,000.

The truck has had the HCU not working for at least two years, with no success at repair due to part unavailable. Truck has low miles due to the brakes being a safety concern. Reached out to RAM customer care several times with the response being parts unavailable. January of 2025 a case number was issued !00Dj001qsDF.!5007y0tkhWy. We had been notified of the recall Jan 2025 and told parts would be available April 2025. Contacted 3 RAM service departments, and no parts are available.

Recently I was informed about a possible engine failure involving a "Grid Heater Bolt". Upon my query, I learned the following: The RAM grid heater bolt failure can lead to serious engine damage. Here are some key points: 1. The grid heater nut can melt and fall off inside the intake plenum, often due to the grid heater relay sticking "on". Or fall off due to vibration. 2. A bolt in the 2007-2023 RAM 6.7L intake air heater can cause severe engine damage, and a warning code (P2609) may indicate this issue. 3. The grid heater bolt/nut can wear from heat or vibration, potentially dropping into the cylinder and destroying the engine. The risk related to this can be minor to catastrophic. Any potential engine failure during operation could cause damage, fire, injury or death. Upon researching this issue, I found the Internet full of warnings, but yet since 2007 to 2023 no factory solution or recall has been made. A recall has been made for simuliar issue. See attached. As a preventive measure, I am replacing mine with a aftermarket device. Something Ram or Cummins engine should have done since 2007. I have not been in a collision or a engine failure. But I am sure since 2007, someone has. There are two or three aftermarket repairs that the manufacturer should have resolved.

The contact owns a 2017 RAM 3500. The contact received notification of NHTSA Campaign Number: 24V896000(Service Brake, Hydraulic); however the part to do the repair was not yet available. The contact stated that while driving 60 MPH, the message "Service Electronic Brake system" was displayed, and the ABS and traction control warning lights were illuminated. The contact stated that upon driving over a bumpy road surface, the brake pedal was depressed but stuttered, and the vehicle failed to respond as intended. The contact stated that while an independent mechanic was in the process of replacing the front driver's side brakes at the residence, the mechanic noticed that the front driver's side brake was grinded. The brake calipers were replaced and the brake line was bled, but the failure persisted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure. The failure milage was approximately 165,000. VIN tool confirms parts not available

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

While test driving a 2017 RAM 3500 6.7L Cummins diesel at Cherry Hill Dodge Chrysler Jeep Ram in Cherry Hill, New Jersey, both the check engine light and the regen warning light came on simultaneously. I returned to the dealership, looked up the regen warning, then retrieved my BlueDriver OBD2 scanner from my own vehicle. I scanned the truck on-site and ran live data. The scan confirmed the diesel particulate filter (DPF) was 100% full, and the regeneration system was not functioning. Permanent fault code P242F was stored, and the exhaust backpressure reading was over 25 PSI at idle — indicating a severely blocked system. These faults were not disclosed by the dealership, and no inspection or documentation from a diesel technician was available. I later discovered the truck also has an open safety recall (Manufacturer Recall Number: C4B / NHTSA Recall Number: 24V-896) for a potential failure of the Brake Hydraulic Control Unit (HCU). This recall involves the loss of ABS, Electronic Stability Control, and Traction Control, and the recall status is listed as incomplete with no remedy available as of the test date. I offered to purchase the truck for $35,000 out-the-door on the condition that the emissions system was repaired and certified. The salesperson spoke with the manager, then returned and told me the vehicle was no longer for sale. I then overheard the manager say they planned to wholesale the vehicle, likely without disclosing these active safety and emissions system f

I am filing this complaint regarding an unresolved safety recall for the Hydraulic Control Unit (HCU) on my 2017 Dodge Ram 3500, VIN ending in [XXX] , under Recall Number C4B/NHTSA 24V-896. We received the recall notification months ago and have been waiting ever since for further instructions or a remedy from FCA US LLC. After more than six months, we still have no resolution. Recently, the vehicle was towed to Patterson Dodge in Tyler, TX, where it was inspected by the dealership. They confirmed that there is currently no remedy available for the HCU issue and stated they have no idea when a fix will be provided. This is not just a matter of inconvenience — this is a critical safety concern. FCA's own recall notice clearly states: “The loss of ABS/ESC/Traction control may cause a vehicle crash without prior warning.” We purchased this truck specifically to tow our 5th wheel camper, which we now cannot safely operate due to the safety risk posed by this unresolved recall. Without proper braking and stability control systems, towing a heavy load would be incredibly dangerous, not only to us but to everyone else on the road. We understand that vehicle recalls can take time to resolve. However, it is extremely concerning that: FCA has offered no timeline or remedy after many months. The vehicle remains inoperable for its intended purpose due to the unresolved recall. We were never proactively contacted with updates and had to follow up on our own. The dealership confirmed the p

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated while operating the vehicle, the message "ABS Failure" was displayed with an audible alarm activated. The vehicle was taken to the local dealer who replaced the ABS module; however, the failure reoccurred. The contact stated that the ABS module was replaced three times. The failure mileage was 44,000. VIN tool confirms parts not available.

Unknown. Not for certain. Dash message says “see dealer. Electronic brake control unit malfunction” - to that effect. HCU/ABS recall needs addressing. No parts available currently.

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the automatic braking system warning light illuminated approximately 3 times within 60 miles. The contact stated that the failure occurred while driving at various speeds, causing the cruise control to deactivate. The dealer was contacted. The manufacturer was not made aware of the issue. The failure mileage was approximately 120,000. VIN tool confirms parts not available.

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The ABS brake system control module HCU is failing vehicle is available for inspection I’m not sure if the brace are going to work or not the traction control is affected. Vehicle is not safe to drive long distance. The vehicle has not been reproduced for a dealer or independent service center. It has not been inspected by the manufacturer or the police or the insurance representative or any other Agency? I was driving along when I got the notice on my dashboard. My ABS module was malfunctioning and then it quit malfunctioningand then it started malfunctioning again, right now it is back-and-forth at random. A call to the local dealer service rep said that the parts not available and they do not know when it will be. My concern is it safe to drive or not?

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brake, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

2nd time truck has warning lights on related to ABS, electronic braking system with no parts available from manufacturer - HCU. Truck is set up to tow a gooseneck trailer. Loss of braking capacity has put me in hazardous situations as the problem is intermittent. Previous repair, where dealer stated my rotors were bad with fewer than 20k miles, was expensive and tech said it could be related to the electronic braking system failure causing rotors to malfunction. No remedy from manufacturer is unacceptable as I'm unable to use my vehicle and if I did, I could be in a situation causing a major accident with no brakes.

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2017 Ram 3500. The contact stated that while driving 60 MPH, the ABS and traction control warning lights illuminated, and the Service ABS message was displayed on the instrument panel. A dealer was contacted. The vehicle was taken to the dealer, where it was diagnosed and determined that the traction control unit and the ABS needed to be replaced. The vehicle was not repaired. The contact stated that the dealer was contacted several times and was informed that parts were not available to repair the vehicle. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure; however, the contact was informed that there was an issue with the vehicle that the manufacturer was working to resolve. The contact stated the failure was a recurrent failure for the past five years. The contact had previously filed a complaint for the failure. The failure mileage was 24,000. VIN tool confirms parts not available.

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.

The ABS system has deactivated along with traction control and all the lights are on the dash with a message that says service electronic brakes system. Stellantis claims that I am not included in the recall even though my model year and model match others being recalled and the part needed to complete the repair is the one that is being redesigned because the original one is faulty. Please help!

Break controller/traction control/cruise control all are not working an being a RV owner WE tow a 2014 Redwood 42 foot 5th wheel, 16000 max weight (our scaled is 14640 pounds). We do not feel that it is safe to tow our RV with the recall that affects towing. This is the 3rd recall/repair on this truck. Please advise us on the towing recommendation/safety on using our truck to tow our RV.

The contact owns a 2017 Ram 3500. The contact stated that while driving at various speeds, the ABS warning light was flashing on the instrument panel. The vehicle was taken to a local dealer where the vehicle was diagnosed with a defective brake hydraulic control unit. The contact paid out of pocket for the repair of the vehicle. The contact later received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact submitted paperwork for a reimbursement to the manufacturer and was provided multiple case numbers for the claim. The vehicle was repaired. The failure mileage was approximately 17,000. VIN tool confirms parts not available.

I own a 2017 ram 3500 that has had ABS brake problem, been trying to fix for years they have no parts available. I don't understand how other people or getting trucks fixed but we seem to get put aside. I actually had two trucks with same problem had to trade the 2018 in with value loss for check engine light with ABS. I was give a case number but no dealers have contacted for repairs. Case 92030267.

FAILURE OF ANTI-LOCK BRAKE SYSTEM MODULE (ABM). FAILURE OF ANTI-LOCK BRAKE SYSTEM HYDRAULIC CONTROL UNIT (HCU). BOTH HAVE FAILED AND HAVE BEEN REPLACED *TWICE* AT DEALERSHIP IN UNDER 40,000 MILES. WARNING LIGHT AND AUDIBLE WARNING INDICATED PROBLEM. BRAKE RESPONSE DANGEROUSLY INADEQUATE. THIS PROBLEM IS UNDER NHTSA 24V-896 / FCA C4B. HOWEVER THIS VIN APPARENTLY EXCLUDED AND/OR NOT RECOGNIZED AS INCLUDED IN RECALL BY FCA/NHTSA. THIS IS IN ERROR AND MUST BE REMEDIATED.

P2609 check engine code for a component in the diesel fuel intake chamber. The relay failed, melted a bolt and attached nut that fell into the intake manifold. The part then traveled into piston cylinder destroying the valves and the engine. The truck then is powerless on the roadway. This is a known issue for all Ram diesel’s manufactured 2007-2024. This should be a major recall and Ram has done nothing for vehicles out of warranty. Please help.

The cruise control stop working and we received a service electronic braking system warning and the trailer brakes stopped working

Column shifter became disconnected in Drive position. Unable to shift into neutral or park. Stuck in Drive position. Unable to turn engine off. Found steering column gear shift bracket broke. See attached picture.

Defective HCU. 2015 Ram 3500 single rear wheel 4 wheel drive with 40,000 miles. ABS light, ESC/Traction Control codes and dingers started in 2020 at 28,000 miles. DTC code indicates defective HCU. Several dealerships have been unable to address repairs due to updated parts unavailable from FCA. This vehicle with known defective braking system has been restricted to local errands for 4+ years for safety reasons while family camper remains stored.

Abs Failure, at around 80,000 miles, Truck is unusable , brake drags and causes overheating, can not get to dealer unless towed. All ABS system lights and failure warning lights are on Have been paying on vehicle which has been unusable since 6/2022 Dealer says parts are not available

Needed to use brakes but unexpectedly the pedal did not work or stop the vehicle. Had to swerve into a ditch to avoid a collision with another vehicle. Abs, traction lights then activated.

The contact owns a 2017 Ram 3500. The contact stated that while operating the vehicle, the ABS warning light remained illuminated with an audible alarm inside the cabin of the vehicle. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 60,000.

ABS light goes on and off constantly, cruse control will not work. Truck has 29,000 mikes and has been doing this for 3 years

Tip start would not start the vehicle on multiple occasions. Truck starter would engage but truck would not start. Please help.

Service antilock brake warning is intermittent. This has been traced to defective pump/control modules. Parts are unavailable.

Antilock brake module failure and no traction control. Also no cruise control. Having this problem for over two years, took vehicle to dealer and replaced valve in abs system. Having the same problem again for one and a half years now. Please fix.

My truck has 57,000 miles on it. Keeps getting "Service electronic braking system" and "ABS" message. "ABS" fault light and "Traction control" fault light comes on. Lights and message stay on for a couple seconds. Does this over and over. I had this problem before when the truck had about 20,000 miles on it. Braking system hydraulic control unit (HCU) was replaced under warranty. Contacted dealer service department and was told it was safe to drive, but abs may not work properly.

[XXX] I got a check engine light and associated ABS and traction control light. Roads were dry and braking seemed fine. Lights eventually went out. Service department at dealership said sometimes moisture will cause this. No codes. Between May and October this problem has become repetitive and has been in the dealership service department multiple times. Codes show only when lights are on. Wheel speed sensor has been replaced (twice), but did not solve problem. Other features affected when these lights are on: 4WD will not engage, cruise control inop, rear collision sensor inoperative. My truck has been in the shop (dealership at Lithia in Anchorage, AK) since 10 Oct. Technician has said it needs ABS module and hydraulic pump, but FCA (or Stellantis who issued service contract) will not release parts (or they are out of parts and won’t admit). Apparently Ram engineers don’t believe service tech and are having him chase an electrical problem and now hub replacement. A quick internet search and it appears thousands of Ram owners (17-18) have dealt with this problem. The mileage is just shy of 110,000 and service contract expires at 125k or Jun 25. As a consumer I’m stuck between Ram engineers, and service department at dealership (currently without vehicle). A heavy duty pickup in Alaska is useless w/o 4WD on the rapidly approaching winter. This is obviously a known problem and needs resolution.

The abs and traction control lights flash on and off. They also have remained off and the back on for while. Happens a lot during summer and when driving for a while. While on cruise control and the lights comes sudden loss of power and agrressive engine slow down causing the vehicle to shake. Has happen multiple times.

Component Failure: ABS ECU and HCU modules presented a trouble code C0020-01 after dashboard warning of ABS System problem. Safety Risk: Pulling my 12,000 trailer down the I-5 Grapevine without ABS, Traction Control or Cruise Control is very dangerous to myself and others. Failure Reproduced and confirmed by independent service center. Manufacturer (Stellantis) RAM insisted they change the HCU module before changing the ECU module (P/N 68347098AC). The HCU replacement did not clear the code, The manufactuer has a hold on shipping any ECU units to their dealer network. Truck has been out of service for three weeks! Dated 10/22/2024

While pulling my trailer on the interstate with cruise control set, I was going up a hill when all of a sudden my engine RPMs skyrocketed and my truck simultaneously lost propulsion. The cruise control system then disabled itself. My truck had slowed down enough that I turned my hazard lights on, and then selected a lower gear due to the decreased speed. While attempting to accelerate back to a normal speed, my trucks RPMs again skyrocketed and my truck simultaneously lost propulsion. I was now fairly certain that my clutch was slipping. I was able to limp the truck back to my shop. I then contacted my dealership asking if this would be covered by the manufacture powertrain warranty, they informed that it was not. I then asked for them to order me a new flywheel, clutch kit, and all other incidental parts. It was at this time the dealer advised that I instead purchase an after-market performance clutch because they had seen very high failure rates from the OEM clutches. Not wanting the risk of using parts not designed by the OEM, I elected to use all OEM replacement parts. Upon installation of the new clutch parts, I discovered the clutch friction material was not even warn down on the slipping clutch. After the repairs, my truck was back to normal until, out of the blue again, the same thing happened with approximately 12,000 miles on the replacement OEM clutch components. Remembering what the dealer said about the high failure rates, I decided to hang onto the original clut

Air suspension repair on the compressor, issue impacting the stability while towing

The Hydraulic Control Unit Chrysler part number 68143491AA failed and Ram refuses to replace/repair it and I’ve been waiting a year. This causes the Anti-lock braking system and Traction control system to no longer function limiting function under wet or slippery conditions. This puts the driver and others at risk. It also disables the cruise control and 4 wheel drive. I have contacted my local dealer multiple times and they have made no attempt to help me. The vehicle/component has not been inspected by the manufacturer, police, insurance representatives or others. There were no Warning lamps/messaged before failure only after. These would be ABS lamp and traction control lamp plus a service ABS warning message. "

ABS system keeps beeping due to known defective part which Dodge has known about. My vehicle only has 27,000 miles on it

On two separate occasions I had total brake loss , the truck has under 21,000 miles on it and while driving and trying to stop I have total brake loss , today I almost rear end a car due to the failure, luckily for them I have relatively good reflexes and I don’t panic , if either of those were not true I possibly could of killed the two occupants of the car in front of me , I was traveling approximately 70 miles an hour on the interstate had had to apply my brakes. When I did I had absolutely no brakes at all, no idiot lights or anything warning me of the problem, this was the second time this occurred , the first time I was on my way home at night and went to stop at a stop sign at an intersection and again total brake loss , both these times I limped home , hoping I would make it home safely. This needs to be investigated before some dies