2018 Ram 2500 complaints

The recall has been out for months and Ram still has no solution, yet parts are available if you purchase them. I paid for replacement for the same ABS issue 3 years ago before it became a recall and now the part has failed again.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated while driving at an undisclosed speed, the cruise control unintendedly deactivated, and the ABS and stability control warning lights remained illuminated. The local dealer was notified of the failure. The failure mileage was 72,000. VIN tool confirms parts not available.

Manufacturer not providing corrections for brake hydraulic control

The contact owns a 2018 Ram 2500. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The ABS warning light illuminated briefly. The contact stated that the brakes locked up, and the vehicle skidded. The contact continued to depress the brake pedal. The contact stated that due to the failure, the vehicle almost rear-ended the vehicle in front. The contact swerved over to another lane and the vehicle finally came to a stop. In addition, the contact stated that the failure caused the instrument panel to seize, and the safety features were disabled. The vehicle was taken to the dealer; however, the vehicle was not diagnosed. The contact was informed that the parts were not available. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was 50,000. VIN tool confirms parts not available.

In December 2024, I received recall notice C4B for my 2018 RAM 2500 truck. The notice concerned the brake hydraulic unit, which is susceptible to failure. At almost exactly the same time, I started to receive dashboard indicators to check the ABS, but it worked fine, I just assumed that the alert was related to the recall. The recall stated that parts were not available and that I would be contacted when there was a resolution. The notice did not indicate that the vehicle was unsafe to drive. Around [XXX], the brakes began making a grinding sound from both sides of the front wheels. I checked the pads, which seemed fine, and there was no scoring on either front rotor. Coincidentally, I got a flat on the left front tire the day after the grinding noise started. It was in the driveway and I was unable to put on the spare until July 12, 2025, the vehicle sat in the driveway with a flat tire until then. After swapping in the spare on the 12th, I planned to get the tire repaired at my local garage. I began pulling out of my driveway at a few miles per hour. I applied the brakes to maintain a slow speed, and the grinding worsened. As I reached the end of my 30 foot driveway and pulled into the street, I heard a clunk, which I also felt through the brake pedal. The pedal immediately went to the floor, and the vehicle rolled across the street before finally stopping. I was able to back into the driveway and park the vehicle without incident. I contacted my local RAM dealer, and they

I have repeatedly asked the manufacturer and the dealership for a resolution to the antilock brake system failure on this vehicle. This issue has been on going for months and I have no resolution. This is Ram case management # 93024671. My last correspondence is as follows: Dear Stellantis Case Management Team, I am writing to express my profound dissatisfaction and serious safety concerns regarding my vehicle, 2018 RAM 2500. This letter follows a delayed response to my initial inquiry about the safety of my vehicle and family, which I find unacceptable. Firstly, I request an immediate and definitive anticipated release date for the crucial part that is pending. The continued uncertainty around this essential component is directly impacting my peace of mind and the perceived safety of my vehicle, my family and the general public. Secondly, I demand a thorough explanation regarding the active fault code on a manufacturer safety device within my vehicle, which your company has inexplicably deemed "normal" and stated the truck is "able to be driven." This assessment is illogical and deeply concerning. If a safety device, such as the anti-lock braking system (ABS) or a similar critical component, registers a fault code, its integrity and intended function are compromised. My fundamental question remains unanswered: If a safety system with a fault code is considered "normal" and safe, then why are such sophisticated safety features like anti-lock brakes installed in the first plac

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer and manufacturer were not yet contacted regarding the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact stated that the vehicle had experienced a braking failure. The vehicle was taken to the dealer, where the brake hydro assist and one of the three brake hoses were replaced. The contact stated that the other two brake hoses were not available to complete the repair. Additionally, the contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that her son had advised her that the vehicle had failed to respond while driving and depressing the brake pedal. Several unknown warning lights were illuminated. The local dealer was contacted. The contact stated that her son was a mechanic and related the failure to the recall. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure and a case was opened. The failure mileage was approximately 120,000. VIN tool confirms parts not available.

Brakes went out abs/traction control/tpms lights on. Brake pedal goes to floor 50% of the time. Have to downshift and use engine brake to stop.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the ABS and traction control warning lights were illuminated. The vehicle was taken to the dealer, where it was diagnosed, and the dealer determined that the failure was related to the recall. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 36,000. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact stated while driving 60 MPH, the ABS light illuminated and flashed on and off. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 126,000. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500.The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that on several occasions while driving at various speeds, the messages "Service Electronic Braking System” and “ABS" were displayed. The traction control and ABS warning lights were illuminated. Additionally, the contact stated that when the brake pedal was depressed on several occasions, the pedal remained on the floorboard. The vehicle was taken to a dealer DTC: C0020-01; was retrieved and the vehicle was diagnosed with ABS module failure. The contact was informed that the ABS module needed to be replaced and the brake lines bled. The vehicle was repaired but the failure reoccurred two years later. The vehicle was taken to a dealer, but the failure was not duplicated. The manufacturer was notified of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 19,445. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact stated while driving at an undisclosed speed, the ABS and the traction control warning lights illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed with ABS module failure. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. In addition, the dealer was made aware of the failure, however the contact was informed that the parts were not available. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact stated while driving and attempting to shift from third gear to a higher gear, the engine revved and the vehicle failed to respond as intended. The contact pulled over to the side of the road, turned off and restarted the vehicle, and the vehicle responded as needed. The contact stated that the failure had been recurring while driving. The vehicle was taken to the dealer, where it was diagnosed with transmission failure. The contact was informed that the transmission needed to be replaced. The vehicle was not repaired. Additionally, the contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the ABS warning light was illuminated. The local dealer was contacted. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 83,000. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer but was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

Vehicle is subject to safety recall for malfunctioning HCU. Frequent illumination of Anti-Lock Break and Traction Control Warning Lights with accompanying Chime and loss of Cruise Control function. When illuminated, vehicle rear wheels will slip and braking is degraded. Illumination of Warning Lights and chime very distracting. FCA initially estimated repair parts available first quarter of 2025. This has passed and no updates are available from manufacturer. This is an unsafe condition.and I request NHTSA intercede on behalf of the 300,000+ owners affected and seek clarification from manufacturer on when they plan on honoring this recall.

The contact owns a 2018 Ram 2500. The contact stated while driving at various speeds, the ABS and traction control warning lights illuminated, with the messages "Service ABS" and "Service Electronic Braking System" displayed intermittently, causing the Cruise Control Mode to become inoperable. The vehicle was taken to an independent mechanic, where it was diagnosed that the HCU needed to be replaced; however, the part was not available. The vehicle was not repaired. The contact later received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 48,500. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that a repair related to the recall was previously performed on the vehicle; however, the failure persisted. The contact stated that the ABS warning light and the traction control warning light were illuminated. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 18,000. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that recently, the ABS, Traction Control, and Tire Sensor warning lights became illuminated. The contact stated that upon checking the tire pressure through the onboard computer, the feature was disabled. In addition, the contact stated that the cruise control was also disabled and the "Park Sensor Disabled" and "Service Electronic Braking System" messages were displayed on the instrument panel. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 89,000. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

ABS HCU recall.

The contact owns a 2018 Ram 2500. The contact stated while driving at various speeds, the ABS warning light and traction control warning light were illuminated. The message "Service ABS" was displayed. The contact stated that the failure caused the cruise control mode and the ABS system to become inoperable. The vehicle was taken to the dealer, where the ABS module and the HCU were replaced; however, the failure persisted. The contact stated that the vehicle decelerated upon depressing the brake pedal. The contact later received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure, but no assistance was provided. The failure mileage was approximately 50,000. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Logging a second complaint for the brake hydraulic control unit that is already recognized by FCA as a defect that needs to be replaced. I am two years into this failed unit and continue to be told by the dealer and manufacturer's customer service that the replacement part is not available and they do not have a delivery date for this part. In the last two years I have had (4) near collisions as a result of no anti-lock brakes and no traction control. Additionally the cruise control is not active when this part fails and as a long-distance driver this is fatiguing. The contant dinging of the warning light and bell is extremely irritating. The reference number for FCA's recall is C4B/NHTSA 24V-896.

The contact owns a 2018 Ram 2500. The contact stated that while driving at an undisclosed speed, there was an abnormal dinging sound coming from the ABS and ESC systems. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 121,000. VIN tool confirms parts not available.

The manufacturer has not designed the replacement parts in a timely manner. 7 months since initial recall and still no parts available.

The contact owns a 2018 Ram 2500 The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that when the brake pedal was depressed, the vehicle hesitated before coming to a stop. Additionally, the vehicle became difficult to steer. The contact stated that the braking distance became extended. The contact had to apply excessive pressure on the brake pedal to stop the vehicle. The failure was intermittent. The ABS and traction control warning lights were illuminated. The dealer was contacted. The manufacturer was not made aware of the issue. The failure mileage was approximately 250,000. VIN tool confirms parts not available.

Towing my camper with my family in the mountains during Memorial Day weekend. It was rainy. My brakes failed me SEVERAL times as well as my traction control. To say it was scary is an understatement. I don’t even want to use the truck anymore. I have had several chats with ramcare as well as a call to my dealership with zero resolutions. Someone is going to get hurt or worse. The HCU no longer works.

The contact owns a 2018 Ram 2500. The contact stated that the ABS warning light was illuminated. The contact stated that the brakes were making abnormal clunking sounds. The contact stated that the traction control, 4WD, and cruise control were inoperable. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. The approximate failure mileage 125,000. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact stated that the ABS, Electronic Stability Control (ESC), and Traction Control systems all failed to operate as needed. In addition, the contact stated that the warning lights and chimes associated with the failures constantly alerted him while driving. The contact then received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was not made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 80,000. VIN tool confirms parts not available.

The warning lights that I have a braking system malfunction continuously "bing" and display on the drivers console. This has been going on for approximately 1 year and Fiat Chrysler of America does not have a solution to this date. Here is the recall information: - Manufacturer Recall NumberC4B -NHTSA Recall Number24V-896 -Recall StatusRecall Incomplete, remedy not yet available I reported this to the dealer approximately a year ago and have since taken to the dealer for service where they told me once again there is no fix for this problem. I have called FCA as well but they are unable to provide any additional information.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated while driving at various speeds and hauling a trailer, the ABS warning light illuminated, followed by the sound of an alarm. The contact stated that the alarms sounded 27 times within 3 miles. The contact stated that the failure disabled the cruise control mode. The vehicle was taken to the dealer, where it was determined that the failure was related to the recall. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of failure and informed the contact that there was no anticipated date for parts availability. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact stated that the ABS, Electronic Stability Control (ESC), and Traction Control system failed to operate as needed. In addition, the warning lights associated with the systems failures were constantly flashing on the instrument panel while driving. The contact then received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was not made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 40,000. VIN tool confirms parts not available.

ABS keeps going off. Ram setup to appointments to fix issue but after going to dealership and sitting for two hours they say they don’t have parts to fix

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Recalled for HCU 11/2024. Still no remedy/fix available.

Leaking brake fluid, brakes grabbing and brake paddle is soft( no pressure).

Ram issued a recall (NHTSA Recall Number 24V-896) on November 27, 2024, and there has been no remedy for repairing or replacing the faulty Brake HCU. It has been six months with no remedy in place for this recall. How long should it take to fix the known problem with this vehicle?

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Ram 2500. The contact stated that the ABS warning light was illuminated, and the message to "Inspect the Braking System" was displayed. The contact stated that upon scanning the vehicle with a vehicle scanner, the contact retrieved diagnostic trouble codes for an ABS system failure. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 59,000. VIN tool confirms parts not available.

Manufacturer has failed to remedy ABS HCU recall for over 6 months. Vehicle is beginning to exhibit ABS warnings. This wait for parts is unacceptable, especially for a braking system recall. Please get the manufacturer to deal with this issue in a timely manner.

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the ABS and traction control warning lights were illuminated. The contact stated that during the failure, the cruise control feature was inoperable. The vehicle was not diagnosed or repaired. The failure mileage was 28,000. The VIN was not available.

Manufacturer has failed to have a solution to current recall, 24V-896. It has been at least 6 months with no resolution.

ABS warning light and alarm come on while driving. If you have cruise control on, it then cancels the cruise control. After a few miles the warning light and alarm will go off, and works good for a few miles. Then the same thing happens - warning light and alarm come on again. This has been an ongoing problem, over a year. Went to dealer where purchased vehicle. Was told that Chrysler doesn't have a fix for this and doesn't have parts to fix it either. So there is nothing I can do. No parts to fix, dealer can't help, and meanwhile I have a faulty vehicle which is my main vehicle I drive. The ABS system is real handy here in Minnesota because of slippery roads in the winter with snow and ice.

There is a well know issue with potential failures in the Hydraulic Control Unit (HCU), which can impact critical braking and stability systems, including ABS, Electronic Stability Control (ESC), and traction control. Manufacturer Recall # - C4B NHTSA Recall # - 24V-896 There has been a recall on this issue since Nov of 2024 however, there has been no remedy offered yet on most models affected. I am experiencing this failure on my 2018 RAM 2500. It is noted in the recall that this failure is a safety issue and can cause the car to crash without prior warning. The remedy is know by RAM as they have issued it for certain chasis types. The Brake HCU must be replaced. I believe RAM's delay for a remedy is simply the cost and they are willfully putting lives in danger over financial impacts.

The contact owns a 2018 Ram 2500. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed and traveled to the floorboard, and the vehicle failed to respond. The contact stated that upon forcefully depressing the brake pedal, the vehicle stopped. There was no warning light illuminated. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic), which the contact related to the failure; however, the part to do the repair was not yet available. An unknown local dealer was contacted. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 132,000. VIN tool confirms parts not available.