2018 Ford Fusion complaints

The entire computer system does not function. The screen, radio, everything has turned completely off in the middle of driving on the highway. It’s concerning what this will cause at some point. It used to do this intermittently, now it’s completely off and I’ve had it to multiple mechanics who have checked everything thoroughly and cannot find anything wrong. Two mechanics told me in 20-30 years as a mechanic theyve only seen this once or twice but couldn’t be fixed. I owe a ton of money on my car, it my only transportation for myself kids and elderly mother, my daughter is a new driver and having everything electrical shut down while driving is going to cause an accident and panic.

Trunk pops open randomly often. It’s popped open while driving and will cause accidents if items fall out, it’s happened multiple times without any possibility of button being hit.

Car knob shifts into reverse or drive without being touched when sitting in park at random times, have nearly hit basketball pole due to being unprepared to hit break. The knob makes a robotic type sound, an automated turning type sound & switches without being touched, has happened several times but not every time

Coolant is leaking into my oil.

I purchased a 2018 Ford Fusions on [XXX]. After two days check engine light came on. The code was showing misfire of 3rd cylinder. I took it to Angela Krause Ford Dealership, in Alpharetta, Ga. The are saying coolant is getting into the cylinders and that the short block needs to be replaced. After doing research, I have found this is a big problem for Ford. A customer Satisfaction Program has been out concerning this issue. ([XXX]). In this program it states the year range, plant manufactured, and mileage that is included in this program. My car is a 2018 Ford Fusion and fits the plant manufactured location and is under mileage threshold. Ford is saying my Vin is not registered for this program. My car is having exact issues and fits the criteria perfectly. I need help to get this covered by Ford. A clear issue, that they have had and recognized. My Car fits the exact profile. Please help get this Vin registered under the program or help get this covered. I believe this could have been an issue before I purchased car. Although Bulletin says coverage is transferred to subsequent owners. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

In November 2023, within 2 weeks of having all my oil/other fluids changed/checked/replenished for normal maintenance, the engine light to my 2018 Ford Fusion Titanium with EcoBoost engine came on suddenly. I let the car cool for several hours, then looked under the hood and could see I still had ample engine coolant. So I called my nearest official Ford Dealership/Service center, and their soonest appointment was a week or so away. The day of, I could not start the car. After dozens of attempts to start the car, it finally did start, but would not accelerate more than 5-10mph, and a warning message: "Reducing power to lower engine temperature" - but this made no sense as the engine had not been running at all for 12+ hours overnight. When I finally got the car towed to the Ford dealership, they took multiple days to diagnose, even though I had scheduled this appointment more than a week prior. Finally the Director of Service at this Ford Dealership texted me: "VERIFIED CONCERN. SCANNED FOR CODES AND FOUND P021D P0303 P0316 P06E9 P1026 P1285 P1299 P164D. LIVE DATA POWER BALANCE SHOWED DEAD MISFIRE ON CYL 3 AND MULTIPLE MISFIRE ON ALL OTHER CYLINDERS. FOUND COOLANT RESERVOIR EMPTY. REMOVED CYL 3 IGNITION COIL AND SPARK PLUG AND FOUND COOLANT INTRUSION IN CYL 3. WILL NEED TO REMOVE AND REPLACE LONG BLOCK ENGINE ASSEMBLY WITH NEW." The quote for this was over $12,000 and non-negotiable. Other texts from Ford's Director of service: "The 1.5 and 2.0 have a bad design... EcoBoost a

The Accessory power interface module has failed. It receives inputs from a variety of sensors, some hardwired directly to it, while most are sent over the bus communications system from the Powertrain Control Module (PCM). These inputs allow the module to communicate with the steering wheel controls, the radio, navigation system and the consumer's personal cell phone via Bluetooth. When I contacted Ford they said there was nothing they were able to do because there is no active recall for this model/year. I strongly feel as if this is a safety hazard due to not only my steering wheel controls being inoperable, but my cruise control, HVAC system, and navigation system, rear camera system, audio system, Bluetooth, to be faulty and not work. Additionally the on the driver seat the part that the seat belt clicks into broke

My car's transmission had a "system shift error", and now it cannot be shifted into any gear besides park, and is underivable. We were stuck at a gas station and blocking traffic. The problem has not resolved, we have not brought it to a service center but we can. There were no warnings besides when it occurred, we simply could not leave the parking lot and had to be towed. The tow truck driver had to drag the car up. onto the bed because since the shifter would not work or go into neutral, he was forced to tow it in park.

The contact owns a 2018 Ford Fusion. The contact stated while driving 5-10 MPH, the message "Coolant Level Low" was displayed. The contact veered to the side of the roadway and added coolant to the vehicle; however, the same message was displayed the following day while driving. Additionally, the check engine warning light was illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed that cylinder #2 was misfiring due to coolant intrusion. The mechanic replaced 1 coil, 1 spark plug, and the coolant reservoir hose; however, the check engine warning light turned off temporarily and the failure persisted. The vehicle was taken back to the independent mechanic, where it was diagnosed that there was a coolant intrusion in cylinder #2, and the engine needed to be replaced. The vehicle was not repaired. The dealer was notified of the failure but did not assist. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under Ford TSB: 22-2229. The failure mileage was approximately 94,000.

I went to head on to a light pole and my passenger side airbags did not deploy

At 80,000 miles my car displayed Error codes that read “Cylinder misfire”. After taking it to a mechanic, I replaced spark plugs and ignition coil. After about 1 month I received a message that said “coolant engine overheating”. The message disappeared after 5 seconds. Shortly after, my car’s engine started to fail. The acceleration wasn’t working and I was forced to pull over. After a few minutes I restarted my car and drove home. When I arrived home I noticed that all the coolant in the coolant reservoir was empty. I refilled the coolant to drive my car to a local mechanic. Once I arrived the coolant reservoir was half way empty. There were no external leaks. The mechanic confirmed that the head gasket was ruined because of the overheating due to the coolant leak. He confirmed that that the leak had caused the original “cylinder misfire code” and coolant had leaked into the engine. My safety was put at risk because my car engine could have over heated or started a fire due to the coolant leak. I cannot drive my car anymore due to the coolant leaking into the engine

I went on a road trip to see family which needed 5 hours of travel. After returning and parking the car, I noticed a knocking noise coming from the engine bay when it was started and was idling. After doing what I could to rule out possible problems I concluded the Flexplate might be the culprit due to Recall 22N12 with Ford. A short time later, my car started to stall if I did not keep my RPM's high enough while my vehicle was stopped. After getting an inspection done with a dealership they confirmed that it is the Flexplate. The symptoms gradually got worse which is what ultimately led me to bring it in to a dealership instead of a different shop. The problem is that this repair estimate I got says this repair is going to cost me $3,000. I am arguing that my vehicle should have been on Recall 22N12. After contacting Ford and going back and forth for 2 and a half hours they told me i'm out of luck and that there was nothing they can/will do about this.

The contact owns a 2018 Ford Fusion. The contact stated that while driving at various speeds, the engine was running rough. Additionally, the A/C was making a loud squealing sound while activated. The contact stated that upon inspecting the vehicle, the contact became aware that the coolant level was low. There was no warning light illuminated. The vehicle was taken to the dealer it was purchased from, and the water pump kit timing belt was replaced. The vehicle remained at the dealer. The contact was unable to confirm that the vehicle had been repaired. The contact related the failure to Ford Campaign Number: 21N12; however, the campaign had expired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 101,000.

Block cracked internally inside cylinder number 2 causing a misfire, white smoke on start up, coolant lose, and overheating. Problem is called coolant intrusion. Safety is at risk is the car dies on the interstate. It has a check engine light for misfire on cylinder 2. Ford is aware of this problem but says my vin is not affected by this problem even though I have this problem.

Purchase car in 2019. 4 years later my car is overheating due to a cylinder crack. No recall was found using my vin number but with a cylinder crack and car overheating this is a safety issue.

Vehicle’s engine was misfiring for a while before check engine light came on. Showing cylinder 2 misfiring codes when scanned. The first dealership replaced the spark plugs, didn’t fix the issue. The next dealership said I have coolant intrusion and need to replace engine.

I heard fluid from what seemed like my dashboard and a puff of white smoke, no sensors came on. My Ford fusion continued but ran rough. I was pulling out of a parking lot onto the street and my Ford fusion was nearly t-boned because it would not accelerate. Later that day my overheat sensor came on and my fusion left me stranded on the side of the road in the middle of nowhere with a baby in 100 degree heat. I called a local mechanic, he put water in it and drove it to his shop. After 400 dollars worth of work the problem persistent, he then checked it for the notorious coolant intrusion issue and confirmed a misfire and coolant intrusion in cylinder 2. It's now parked and has not been driven in 3 months.

The contact owns a 2018 Ford Fusion. The contact stated during a routine oil change and tire rotation, the contact was informed that the lug nuts were swollen and needed to be cut off to be removed. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 58,000.

Went to have car serviced and was told lug nuts were swollen and it was a Ford defect, but had to pay over $120 to replace lug nuts in order to get my tires rotated.

My cars coolant is leak and I don't know where it goes. It overheats and the coolant continually needs to be added. The coolant cap has cracked twice and its is hard to find a replacement cap and we can't drive the car. I have taken it to two auto repair shops, and they said the issue can NOT be fixed. I am in fear of it overheating all the time. This is causing me fear and I believe it is dangerous and I am stuck paying for a car I can't drive.

I have a 2018 ford fusion 2.0L ecoboost with around 77k miles and started to see coolant loss with no visible signs in engine bay or below.car, rough start with error P0316 and occasional misfire. White smoke comes from exhaust on start sometimes. Also have to fill coolant every other day or so. It looks as coolant intrusion issue very common with these engines.

The contact owns a 2018 Ford Fusion. The contact stated that while driving at an undisclosed speed, the temperature gauge indicated that the engine was overheating, and the vehicle briefly shuddered. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, who diagnosed failures with the head gasket and turbo charger. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 75,000.

M 19 year old daughter purchased the 2018 Ford Fusion 1.5L FWD certified on May 10th from AutoNation Ford of Orange Park, FL on 5/10/2023. Car broke down on 7/31/23 at 93032 miles and had it towed back to AutoNation. Was told that the flexplate broke and that there was coolant intrusion in one or more cylinders. Had the car repaired using the extended warranty plan that was purchased for the engine repair. Also paid to have the flexplate replaced. Received the car back on 9/22/23 with 93041 miles. On 9/26/23, check engine light at 93173. Code read oxygen sensor and emission purge valve sensor. Did not have repaired right away so that we can save up for the cost since it wasn't covered by the extended warranty plan. The cost was going to be about 700.00. Then the car started to hesitate in traffic while making a loud "farting" noise and eventually breaking down on 11/8/23 . We were able to get it to Garber Ford in Green Cove Springs but was told by the mechanic that the car is to dangerous to drive anymore. After a diagnostic was performed, we were told that not only is the evap purge valve bad, the car now needs a new transmission. The transmission pours out as fast as they can put it in. Due to the broken flexplate being noted during the first repair, its highly likely that the warranty company will cover. Estimated cost is 10k if we approve the breakdown and they deny. If we do not approve the breakdown so that insurance can inspect and just replace the transmission it will

On 11/17, I received a shift system failure alert. The car would not go into park and I could not start the vehicle. We contacted the dealer to have the car towed. The dealer indicated there was a current recall for the same issue however this car was not included. There is a known issue with other ford fusions. As a result I am having to pay out of pocket for the fix. The recall should be expanded to include 2017-2018

The contact owns a 2018 Ford Fusion. The contact stated that after starting the vehicle, he observed excessive smoke coming from the engine compartment as well as the rear exhaust. The check engine warning light was illuminated. The vehicle was taken to the dealer, who determined there was coolant intrusion into the engine cylinder that caused damage to the cylinder head. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure, and a case was opened. The failure mileage was 89,000.

The contact owns a 2018 Ford Fusion. The contact stated that upon taking the vehicle into the dealer for an oil change, the contact was informed that the engine was empty of coolant. No warning lights were illuminated. The vehicle was taken to the dealer, who determined coolant intrusion had caused damage to the cylinder head, requiring a replacement. The vehicle was not repaired. After investigating the failure, the contact related it to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 47,000.

The contact owns a 2018 Ford Fusion. The contact stated while driving approximately 40 MPH, the transmission inadvertently shifted into a lower gear. The contact stated that the gear shifter failed to shift. The vehicle was towed to an independent mechanic where it was diagnosed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 72,000.

The contact's daughter owns a 2018 Ford Fusion. The contact stated that while starting the vehicle, the infotainment system screen was black. Additionally, the contact stated that while reversing, the rearview camera failed to activate, and the screen remained black. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that the rearview camera screen needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 30,000.

The contact owns a 2018 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull over to the shoulder of the roadway, where the vehicle was able to be restarted. The engine overheating warning light was illuminated. The vehicle was towed to the dealer, who determined coolant intrusion had caused damages to the engine. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 96,000.

The contact owns a 2018 Ford Fusion. The contact stated that the vehicle was hesitating while driving uphill. There was no warning light illuminated. The failure persisted and the vehicle entered LIMP Mode and jerked while depressing the accelerator pedal. The contact also stated that the gear shifter dial became firm and made it difficult to shift the vehicle out of park(P). An unknown dealer and the manufacturer were notified of the failure and informed the contact there was no recall associated with the failure. The vehicle had yet to be repaired. The failure mileage was approximately 100,000.

I was driving and all of the sudden engine overheated and car could not drive over 10MPH during an extremely bad storm at night on the highway putting me in extreme danger if someone were to have been behind me. There were no engine lights on or warning signs of this happening and just happened out of nowhere car was driving fine before it happened. Issue happened on September 26th, 2023. This is the second engine problem I have had since getting the car in 2021. Last issue was with the top half of the engine CAC/intake manifold and luckily was under warranty or would have been over $6,000. Had vehicle towed to Ford dealership and there verified a check engine light fault. P0303 active in PCM. Upon diagnosing the concern found that the head gasket is leaking into cylinder 2 and 3 due to a failed cylinder block assembly. Need to replace the short block assembly with an updated design. Was quoted $8,700 to fix the issue. I can't afford to pull that kind of money out to fix a car that isn't even 5 years old. Car is no longer under warranty.

The contact owns a 2018 Ford Fusion. The contact stated that the engine was running rough while the vehicle was idling. The contact stated that the check engine warning light illuminated the following day. The contact stated that the failure recurred while the vehicle was idling. The vehicle was taken to the dealer, where it was diagnosed that there was coolant intrusion in the engine cylinders, causing the engine to misfire. The dealer related the failure to Ford Campaign Number: 22-2322 and informed the contact that the short block needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA hotline for assistance. The failure mileage was approximately 69,900.

I bought my 2018 Ford Fusion new and it currently has 35,000 miles on it. It began misfiring about 2 months ago, and then the check engine light came on. After a diagnostic exam, I was told the engine needed to be replaced. Luckily I was still within the warranty extension window for this particular problem, so the engine was replaced. However, I spent the majority of this time without my car. They were able to secure me a loaner car, but only for 3 days out of the total duration of the repair. I was stuck without my car the remainder of the time with very little communication from Ford about what was going on. When I asked if my car was still at risk of the same thing happening again, I was given a very vague answer that was not particularly reassuring.

The contact owns a 2018 Ford Fusion. The contact stated that she initially received a notice in the mail about a Customer Satisfaction Program-19B37. The contact took the vehicle to the dealer and was informed that the program was cleared off the vehicle. The contact then stated that while driving at various speeds, the vehicle would hesitate upon depression of the accelerator pedal as the "Service Engine" warning light appeared on the instrument panel. In addition, the vehicle would fail to start upon refueling. The contact used a code reader which determined that the purge valve was defective, and the part was replaced. Once the purge valve was replaced, the vehicle was restarted, and the code reader then showed a misfire in cylinder #2. The contact replaced the spark plugs and engine coils but then noticed moisture in the engine block. The vehicle was taken to the dealer for a diagnostic test where the mechanic confirmed coolant intrusion in the engine block. The contact was informed that the engine needed to be replaced. The dealer reached out to the manufacturer and was informed by text that manufacturer would not assist with the repair of the vehicle. Upon investigation, the contact linked the failure to Customer Satisfaction Program: 19B37. The contact called the manufacturer herself and the manufacturer denied the program. The vehicle was not repaired. The failure mileage was approximately 78,000.

The contact owns a 2018 Ford Fusion. The contact stated while driving 40 MPH, the vehicle suddenly stalled. The message " Shift Sys Fault. Service Required" was displayed. The contact was unable to pull to the side of the road. The contact stated that she turned off and restarted the vehicle, but the vehicle failed to respond as needed. A bystander assisted the contact in manually moving the transmission shifter cable bushing back into position. The contact stated vehicle then responded as needed; however, the failure recurred while driving and hitting a pothole. The transmission shifter cable bushing was manually moved back into position. The vehicle was taken to the dealer, who determined that the failure was related to the transmission shifter cable bushing; however, the vehicle was not diagnosed nor repaired. The contact purchased the part from the dealer, and the vehicle was taken to an independent mechanic, who replaced the part. The mechanic informed the contact that the repair was temporary, and that she would need to take the vehicle to dealer for an adequate repair. The dealer was contacted and stated that the earliest availability was in 3 weeks. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA hotline for assistance. The failure mileage was approximately 75,000.

While driving the vehicle a light came on indicating that the "Engine compartment was overheating". The next time driving the vehicle the light was gone away and shortly later the Check Engine light came on. Took to the local dealership and they determined that their were 2 verified misfires and when they pulled the plugs using a scope they found coolant intrusion in one of the cylinders. The recommendation per Ford is to replace the engine assembly.

The contact owns a 2018 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle was shaking, and there was white smoke coming from the exhaust tip. The contact stated that after starting the vehicle the following day, she noticed an abnormal odor. The contact stated that while driving at an undisclosed speed, the temperature gauge relayed that the engine was overheating. The vehicle was taken to the dealer but was not diagnosed. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 158,000. The VIN was unavailable.

Coolant intrusion issue which is known to occur in this specific engine which is shared across many of Ford's automobiles. Customer Satisfaction Program 21N12 and 19B37 My car is just outside of the program guidelines- however it was in the dealership prior to it exceeding the program guidelines and I was never informed of the issue. Vehicle Model Year Assembly Plant Build Dates Escape 2017-2019 Louisville September 17, 2015 through April 8, 2019 Fusion 2017 Flat Rock October 1, 2015 through October 16, 2015 Fusion 2017-2019 Hermosillo October 6, 2015 through June 10, 2019

I WAS DRIVING MY CAR HOME FROM DINNER AND I MADE A LEFT TURN. AS MY STEERING WHEEL WAS RETURNING TO CENTER FROM MAKING THE TURN THE STEERING WHEEL BECAME EXTREMELY LOOSE AND IS STILL LOOSE AT THIS PRESENT TIME

The contact owns a 2018 Ford Fusion. The contact stated that upon starting the vehicle, the shift system fault message was displayed on the instrument panel and the vehicle failed to shift out of park. After several attempts, the contact was able to drive the vehicle to the dealer. The contact was informed that the shifter cable bushing was missing and needed to be replaced. The manufacturer was not notified of the failure. The vehicle was repaired. The failure mileage was approximately 99,000.

The contact owns a 2018 Ford Fusion. The contact stated when the vehicle was started, the contact turned the shifter knob to drive (D) however, the knob would not turn and appeared to be frozen in park (P). The contact stated no warning light was illuminated. The contact had the vehicle towed to an independent mechanic who retrieved DTC codes indicating that the transmission needed to be serviced by a dealer. The vehicle had not been repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 148,000.

I've got engine light on then send to Ford dealer. Diagnostic says Purge Valve Replacement, I was told that there was a misfire caused by coolant intrusion cylinder 1. They also told me that this was a KNOWN ISSUE a few years back and it needed a NEW ENGINE to fix the problem. I asked them several questions about why only telling me now since it's an ongoing issue and why is it that no one from Ford dealer all different state that I brought in my car to check safety issues and regular oil changes informed me about this? I just retired and the dealer asked me to pay for the repair of new engine plus labor. I can't afford and it's hard to accept that someone lying to get some money from me. I read an article from your website with the same issue that there is a recall but the dealer told me that this was only a KNOWN problem NOT a recall. Please see the link [XXX] Kindly help me to resolve this issue and help others. Let them send a recall again to every Ford owner/user to avoid accidents that can cause death. This is ongoing and my case with the dealer has still not been given an answer for almost a week tomorrow. I appreciate your help and hoping to hear from you soon. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2018 Ford Fusion. The contact stated that the vehicle jerked while starting. The check engine and transmission warning lights were illuminated. The vehicle was taken to an independent mechanic, who diagnosed and related the failure to Technical Service Bulletin: SSM 47849 (Coolant Consumption); however, the vehicle was not covered under the TSB. The vehicle was not repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 104,000.

The contact owns a 2018 Ford Fusion. The contact stated while driving 70 MPH, the message "Coolant Hot" was displayed. The contact pulled over on the side of the road and notice that there was no coolant in the reservoir. The contact added coolant into the reservoir, but the coolant leaked out. The vehicle was towed to the dealer. The dealer diagnosed the vehicle and stated that the engine needed to be replaced and that the vehicle was out of warranty. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 99,960.

The contact owns a 2018 Ford Fusion. The contact stated that after starting the vehicle, it was discovered that the rotary knob transmission selector had become stuck in park, and the vehicle could not be driven. Additionally, on several occasions after switching the transmission selector knob to park and turning the vehicle off, the selector had erroneously shifted from park and the vehicle could not be immediately restarted. The cause of the failures was not yet determined. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 50,000.

The rotary dial gear shifter has intermitantly malfunctioned for 6 months in two ways. 1) When the rotary dial gear shifter is put into park, very often it won't move out of park. Won't go to D, R, or N.In the beginning I was using the key to the car to stick in a slot in the center counsel and that would pop it out of park. This worked for a few months. Since then I need to hit it firmly with a fist to get it to pop out of park. Sometimes I need to turn the car off and wait 10, 20, 30 minutes before hitting it with a fist will get it out. 2) The second way it malfunctions is that when it is in park sometimes it moves to Drive all on its own. I will exit the car after putting it in park. When I come back it won't start because it is in Drive. I always make certain it is in Park when I exit. These things put me at risk because I live in Minnesota. I have been alone parking lots at negative 20 degrees in the dark and could not drive home. I would spend a long time (hour) turning it off and on, pushing on it etc. before it would move out of Park. A few times someone has had to come get me. Then the the next day take me back and it spontaneously works. This happens in moderate and hot weather too. ALSO Myself and bystanders and other cars are at risk when it keeps moving on it's own from Park to Drive -any bump or push to the car on a hill would send it rolling. I took it to Autonation in White Bear Lake where it was purchased from in 2018. The problem would not occur for them. T

The contact owns a 2018 Ford Fusion. The contact stated while the vehicle was idling, the engine overheated. The temperature gauge increased to HOT. The check engine warning light was illuminated. The high-temperature indicator light was flashing, and the fan was engaged. The vehicle was running rough. There was white smoke coming from the vehicle. The vehicle was taken to the local dealer, where it was diagnosed that there was a crack in the engine block and that cylinder #3 had a misfire. The engine block was replaced. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The failure mileage was approximately 188,000.

The contact owns a 2018 Ford Fusion. The contact stated that while the vehicle was idling at a stop light, the vehicle started to shake. The coolant temperature warning light was illuminated. The contact then stated that while operating the air conditioning system, hot air started to blow from the vents. The contact stated that she was concerned for her safety. The vehicle was taken to an independent mechanic where it was diagnosed that coolant had leaked into the cylinders and the cylinder head was cracked; however, the contact then stated that she was informed by the mechanic of corrosion at an unknown location of the vehicle. The contact was unsure of what needed to be repaired. The vehicle was not repaired. The dealer was not notified of the failure. The manufacturer was notified of the failure and the contact was informed that the VIN was not included in a recall and provided a case number. The failure mileage was approximately 51,000.

The contact owns a 2018 Ford Fusion. The contact stated while driving at an undisclosed speed, the message "Coolant System Temperature Above" was displayed, and the vehicle stalled. An unknown dealer was notified of the failure. The vehicle was taken to an independent mechanic, where it was diagnosed that the engine had failed and needed to be repaired. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 90,000.

The contact owns a 2018 Ford Focus. The contact stated that while the vehicle was parked, the contact became aware that the gear shift indicator erroneously showed that the vehicle was in reverse(R). The gear shifter warning light was illuminated. The vehicle was towed back to the residence. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and confirmed that the VIN was not under recall. The failure mileage was unknown.