2014 Ford Fusion complaints

The back up camera is intermittent or is a black screen. It also displays like a mirror image instead of what is directly behind me (right is on the left and left is on the right)

The backup camera is not working right it's either fuzzy or it's black and sometimes it is showing on opposite direction causing me to almost have a huge accident with my children inside this is currently still happening and started over 2 months ago.

Rear viiew camera stops working and/or goes blank when the car is put in reverse. Sometimes will also displays Back up camera not working please contact dealership.

This is a report of the same issues that have been issued a recall for newer years of the same make and model, the Ford Fusion. The rear backup camera stopped working and directly impedes the safety and visibility when reversing the vehicle. An error/warning comes up to contact the dealership due to the malfunction. The 2014 was excluded from the recent recall for these same backup cameras on the 2016+ models. The recall needs to be extended to ALL years of the Ford Fusion.

I went to start my vehicle and none of the electronic instrument panels turned off. The car started but i couldn't see anything on the panel. I turned off the car, waited for a few minutes, and turned it back on. The instrument panel and other electronic screens turned on but I had 8 different lights pop back on. I had my scan tool and pulled various codes regarding the PCM and losing connection to ABS, steering column, power steering, etc. I took it into my mechanic and they were not able to replicate the issue.

The back-up camera has been very intermittent in its operation. Most of the time, it will show up black. I pulled a code saying that there's an communication error. More recently, it has turned on but everything is inversed. When i turn right, the camera is showing it on the left-hand side of the screen.

The contact owns a 2014 Ford Fusion. The contact stated that while the vehicle was parked and occupied, the contact’s daughter attempted to turn off the vehicle, and the brake lights remained illuminated. Additionally, while depressing the accelerator pedal, the vehicle decelerated unintentionally while driving to the residence with smoke coming from the vehicle. The contact stated that an independent mechanic was contacted. The vehicle was taken to be diagnosed, and it was determined that the brake switch needed to be replaced. The vehicle was then towed back to the independent mechanic, and the contact was informed that all four brakes had seized. The brakes were unlocked, and the brake switch was replaced. The contact stated that the failure had occurred twice. The manufacturer was not notified of the failure. The approximate failure mileage was 200,000.

Rear view camera inspection recall (Campaign 25SA9/25v695) should be extended at least a few more years. My 2014 Ford Fusion Platinum is affected by the same issue.

The contact owns a 2014 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera displayed a blank screen, or no lines, no color, and glitched while operating. A dealer was contacted. The vehicle was not taken to an independent mechanic or dealer to be diagnosed. The dealer was contacted; however, the contact was informed that there was no recall on the VIN for the rearview camera. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 86,000.

My brakes periodically engage autonomously, including when I have cruise control on, or at home, which respectively turns off cruise control, and leaves my brakes lights on, killing my battery. It is my understanding that my year make and model have a recall for the brake sensor switch, but does not show for my VIN. My car was located in Texas satisfying the hot/ humid condition of the existing recall.

Vehicle camera works intermittently. The screen will come on while in reverse however, will go BLACK. I've turned the camera off and on but the same thing happens. The camera should not function like this.

The rearview camera does not display properly. The image is flipped which can cause confusion when using the camera to check for traffic. Sometimes the camera does not come on/display images when shifting into reverse. Also at night the camera is streaky so one is unable to see images in the camera. I noticed there was a recall for the rearview camera but my make/model/year was not included but I am experiencing issues with the rearview camera.

The backup camera rarely works, even with replacements.

Coolant intrusion from a defective engine block.

Transmission fluid leaks through the left side axel. when filled several times and changed the axel and the seal, it continued to leak. I checked it in with a transmission shop and they said to me that many fusions have been leaking and they will try to change the pushing inside the cup.

The transmission failed completely. The vehicle will not engage or shift properly and cannot be driven. The failed transmission is still installed in the vehicle and available for inspection upon request.

Was driving at about 45mph on [XXX] on [XXX] and there was a lower control arm failure on the front passenger side of vehicle. Caused the vehicle to be inoperable. I was able to have someone pull me out of the way to not impeded traffic with the car in neutral but was unable to do much with it. It was late at night so I was unable to really access the damage. My wife had our insurance tow the vehicle to my home a few hours ago on [XXX] and it appears the lower control arm is gone, the axle has detached from the wheel (axle still hanging from bottom of car), pretty bad damage to the inner wheel well, passenger fender, and minor damage to the front bumper and passenger side skirt. I had read there was a recall on this vehicle online and wanted to find out more about my options. The car has just shy of 100k miles and is a daily driver. So I am stuck in a bad potisition with this. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Recent problem with the backup camera on a 2014 Ford Fusion Hybrid that intermittently shows the image in reverse- right is left and left is right. This is very dangerous when backing up . Ford is aware of the problem and has recalls on other models with the same problem but not ours.

2014 Ford Fusion 4D 2Wd SE Backup camera started when my car was 9 to 10 years old occasionally goes black and show reversed but not upside down. Within 5 months it continually shows images reversed. I attempted to do a software update but since it was over 10 years old at the time I was not allowed to I also spoke to the car dealership and was told that was correct. No recalls on the backup camera I was told I would need to pay between 500 and 1000 dollars to have it fixed. I found a site on the internet that say the 2014 also had a recall but the Ford site does not show my vin indicating that is true.

Went too start the vehicle and power steering/steering at all was at a loss

Was driving lost power steering shut my car off turned it back on all the lights were gone off the dash and it had power steering again . Parked went to work the next day and drove home fine parked and then all the same lights came on again and has lost all power steering .

AdvanceTrac stopped working in my car due a sensor. Had to get it replaced by Midas. When I went to turn on my car and put it in drive it started making an awful grinding sound and would not move and gave me an error code that just said service AdvanceTrac. It was insanely expensive to repair and thankfully didn't happen while I was driving.

The contact owns a 2014 Ford Fusion. The contact stated that while his son was driving approximately 70 MPH, the check engine warning illuminated. The contact stated that the vehicle went into LIMP Mode, and his son was able to coast to the side of the highway. The contact drove out to his son's location and was able to clear the codes using a handheld scanner and the vehicle was able to be driven back to the residence. The contact stated that the failure was intermittent, and the vehicle was showing other symptoms. The contact stated that the vehicle was idling rough after a cold start and occasionally was blowing white smoke from the exhaust pipe. The contact stated that 2 years prior the vehicle exhibited the same symptoms, and the vehicle was taken to a dealer who diagnosed that there was coolant intrusion into the engine block, and the engine was replaced. The contact stated that the vehicle was under warranty at the time of the failure. The contact had taken the vehicle to an independent mechanic who diagnosed the vehicle and confirmed that there was coolant intrusion into the engine, and that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline. The failure mileage was 86,825.

Coolant is leaking into the head gasket of the 2014 Ford Fusion Hybrid similar to the other 2014 Ford Fusion cars (they have a recall on them for this issue). Upon calling the nearest Ford dealership, I was told that the recall did not apply to my vehicle, even though the same recall has been made for other 2014 Ford Fusions (just not the hybrid specifically). The safety of the driver and passengers in the car is at risk due to the coolant fluid mixing into the engine oil, eventually causing a blown head gasket and potentially engine failure. This problem was identified within minutes of getting a routine oil change, as coolant was found in the cap of the head gasket. The vehicle has not been inspected by the manufacturer, police, or insurance representatives. There were no warning signs. The car notified me when I needed to change my oil, but otherwise, no dash lights came on and no notifications were sent to the dash.

On cold startup, a significant amount of white exhaust is sometimes observed coming out of the tailpipes. The exhaust has a sweet aroma and after checking the coolant levels, it appears that the coolant levels have dropped and the exhaust smoke is being caused by a coolant intrusion into the engine block. No warning lights have been observed and it only happens about half of the time.

The contact owns a 2014 Ford Fusion. The contact stated that while driving at an undisclosed speed, there was a loud clunking sound coming from the steering wheel while attempting to make a turn. There were several unknown warning lights illuminated. The contact stated that the steering wheel was difficult to turn. The vehicle was taken to the dealer, where it was diagnosed and determined that the electric rack and pinion had failed and needed to be replaced. The contact ordered the parts and had the dealer install the parts. The vehicle was repaired; however, the failure recurred. The vehicle was taken back to the dealer, where the same diagnostic was provided. The contact was informed that the electric rack and pinion needed to be replaced. The parts were ordered by the dealer. The vehicle was repaired; however, the failure recurred. The vehicle was taken back to the dealer, where the same diagnostic was provided. The contact was informed that electric rack and pinion needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 208,864.

The contact owns a 2014 Ford Fusion. The contact stated that upon starting the vehicle, the messages "Service - AdvanceTrac Off", "Hill start Assist Unavailable", and "Steering Assist Fault - Required" were displayed. The vehicle was towed to the dealer, where it was diagnosed that the steering rack had failed and needed to be replaced. The vehicle was not repaired. The contact referenced an unknown recall; however the VIN was not included in the unknown recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 78,000.

I am submitting this complaint regarding a complete loss of power steering on my 2014 Ford Fusion. The issue occurred without warning and was accompanied by multiple dashboard alerts including: “Steering Loss – Stop Safely” “Service AdvanceTrac” “Hill Start Assist Not Available” The steering became extremely heavy and difficult to turn, creating a major safety concern—especially while driving at low speeds or attempting to park. I have since researched this issue and found numerous reports from other 2014 Ford Fusion owners experiencing the exact same failure. While Ford issued a Customer Satisfaction Program (15N01) covering similar issues on 2011–2013 Fusion models, no such support appears to be available for the 2014 model—even though the symptoms and system design are identical. Dealers are quoting repairs in excess of $3,500 to replace the rack-and-pinion steering system, which is believed to be the source of the failure. Given the abrupt and dangerous nature of the malfunction, I am requesting that NHTSA investigate this issue as a potential safety defect and consider whether Ford should expand coverage or issue a formal recall for affected 2014 vehicles. This is a critical steering safety issue that could easily lead to accidents or injury if it happens at higher speeds or in traffic. I urge the NHTSA to take this seriously and evaluate Ford’s handling of this problem in 2014 Fusion models. Thank you for your attention to this matter. Sincerely, [XXX] [XXX] [XXX] [XXX]

My brake fluid line ruptured and the dealer refused repair and told me that even if they did repair it I would take 2 days and wouldn’t provide a loaner/rental so I had took to a different shop that I had to pay out of pocket for and was done in an hour.and also this is a recall for my year make and model and isn’t on my vin

I left my car at Ford to do the recalls, they just called me telling me they won’t fix the brake light on because in Florida it doesn’t cover the repair, something about the humidity here. It doesn’t make sense for me, they were trying to charge me around 400 bucks to fix it. They will give me my car back without fixing the problem. My car is at Matthews-Currie Ford in Venice.

Steering gear in rack in pinion grinding and felt like car stalled and steering went hard..no warnings or indications prior to..67,000 miles on Car …now there is a continuous grinding sound coming from steering wheel and Ford had a recall on 2014 Fusion but my car doesn’t show any …afraid steering may lock up without warning

The contact owns a 2014 Ford Fusion. The contact stated that while wearing the driver's side seat belt, the seat belt failed to retract and was locked. The contact stated that the failure mostly occurred after the vehicle had been parked outside in extreme heat, but the seat belt operated as needed in the morning after the vehicle had been parked in the garage overnight. The contact was unable to secure herself inside the vehicle using the seat belt. There was no warning light illuminated. The contact stated that the failure was related to NHTSA Campaign Number: 16V875000 (Seat belts); however, the VIN was not included. The local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 65,000.

The contact owns a 2014 Ford Fusion. The contact stated while the vehicle was parked, the front driver's side door latch failed to operate as intended and the door failed to close securely. The contact stated that due to the failure the vehicle was driven to work with an open door. The vehicle was taken to the dealer where it was determined that the front driver's door latch was inoperable. The contact was informed that the front driver's door latch needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The contact stated that a week later, the rear passenger's door latch failed to latch as intended. The vehicle was scheduled to be inspected. The vehicle was not yet diagnosed or repaired by an independent mechanic or the dealer. The contact referenced NHTSA Campaign Number: 23V775000 (Latches/Locks/Linkages); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 121,198.

I had multiple coolant leaks in the pass and I have to constantly replace the hose about every 2000-3000 miles Also my screen went out in my dashboard causing me to not be able to make any audio changes or station adjustments in my car Lastly whenever I get ready to increase my speed my car jerks back

Our 2014 Ford Fusion was recalled under NHTSA Campaign Number 15V250000, issued June 24, 2015, for an issue with internal binding and corrosion in the power steering rack which could lead to a loss of power steering assist. In 2015, Brighton Ford (Livingston County, MI) performed the recall remedy. After that service, our vehicle's VIN was removed from NHTSA's active recall list. However, on [XXX], less than 10 years later, the exact same issue occurred again—the steering wheel froze and the front wheels did not respond. The "Steering Loss" warning appeared. Thankfully, no one was hurt. The car was diagnosed and repaired at Balise Ford of Wilbraham, MA. They retrieved DTC C102D:00 which indicates high friction in the power steering gear, a symptom specifically tied to internal binding caused by water ingress, as described in the original recall. The steering rack was replaced at our expense. The repair invoice and technician comments clearly describe the same failure mode the recall was meant to prevent. This indicates the original recall remedy was ineffective in our case. WHAT IS YOUR REQUEST TO NHTSA? We respectfully request that NHTSA: Reinstate our VIN on the 15V250000 recall list, acknowledging that the original repair was inadequate and the defect recurred. Enable us to seek reimbursement from Ford for the repair and towing costs now totaling over $5,400. This situation demonstrates that a single recall remedy does not always fully resolve the safety issue. We hope NHT

The contact owns a 2014 Ford Fusion. The contact stated that after starting the vehicle, the vehicle made an abnormally loud sound and the steering wheel seized. The "Service Advancetrac" message was displayed. The vehicle was towed to the dealer, who determined that the steering gear needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 140,000.

Driving down the road and the trunk popped open on its own. It has happened multiple times while driving. The trunk will just open up on its own without pushing the button or anything.

On May 15, 2025 I experience a loss of power steering assist in my vehicle due to steering gear bold corrosion. There is a recall for this exact same issue, 19S26/19V632, issued on 2019-10-11, however, Ford is telling me my VIN number is not included in this recall. They are also claiming this problem was fixed as part of their recall 19R02 back in 2015. As part of the more recent recall, the remedy calls for replacing the bolts and applying a corrosion inhibitor, but they obviously did not do when fixing recall 19R02 back in 2015.

I currently have no open recalls on my vehicle however I feel as though my vehicle is apart of the the national recall involving the steer column. My vehicle jerks at high speeds randomly and I sometimes lose control. This issue has been seen by multiple mechanics and they’ve done numerous inspections but can’t find the problem. They only tell me they think it may fix the issue but none are certain. I’ve gotten two wheel alignments within a year and each time I’m recommended a wheel alignment by a different mechanic. I’ve bought several tires of this issue because the wear on my tires keeps wearing out and causing my tires to blow out. I believe it involves the national recall.

Around [XXX], I began experiencing issues with the electric power steering system in my 2014 Ford Fusion. The steering became noticeably stiff and difficult to turn, especially at low speeds. A warning message appeared on the dashboard — something like “Service Trac” or a similar alert. Despite the warning and steering difficulty, I was able to continue driving the vehicle for about a week, but it became increasingly unsafe and physically demanding to steer. The vehicle has approximately 138,000 miles and was purchased from a dealership in Michigan just a few months ago. The issue has not been inspected by a Ford dealer, but an independent service center diagnosed the problem as a failure of the electric power steering system. I was quoted $2,400 for a new part or around $1,000 for a used one, not including labor. I checked my VIN using Ford’s official site and confirmed there are no open recalls or Customer Satisfaction Programs for the steering system on this vehicle. However, this issue appears to match the symptoms described in Ford recall 19V632000, which applies to some 2014 Fusions with the same steering design. My vehicle appears to be excluded from that recall. Given the widespread nature of this defect and the serious safety risk it poses, I believe the recall should be expanded to include more affected VINs. This failure could easily result in loss of control at higher speeds and represents a hazard to both occupants and others on the road. Thanks for your time [XX

Original/factory back-up camera will go blank or not even change displays when the vehicle is placed in reverse. First occurrence began sometime in 2024.

Power steering rack and pinion

Nothing on my steering wheel that controls dash works

While driving on highway, my 2014 Ford Fusion suddenly reported loss steering power and it was requiring a greater steering effort to make a small turn. I have to stop unexpectedly on highway. This incident reminded me that a day or two, I started to feel some roughness while turning in low speed locally. But it didn't affect driving.

The contact owns a 2014 Ford Fusion. The contact stated that while starting the vehicle, the vehicle idled and then stalled. There was no warning light illuminated. The contact used a code reader to diagnose the vehicle. The contact filled the coolant reservoir and noticed that the coolant was leaking out. There was coolant intrusion into the cylinder, causing engine failure. The vehicle was towed to the dealer, and confirmed that there was coolant intrusion into the block head. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The contact related the failure to Technical Service Bulletin: 23-2223. The manufacturer was notified of the failure and the manufacturer referred the contact to the NHTSA Hotline to report the failure. The approximate failure mileage was 154,135.

The contact owns a 2014 Ford Fusion. The contact stated that while leaving a parking lot at approximately 10 MPH, the steering wheel seized. The contact turned off the vehicle and waited for a while before restarting the vehicle. The contact restarted the vehicle 3 times before being able to turn the steering wheel; however, the power steering functionality remained inoperable. The contact stated that the Service Advancetrac, Lane Keep Assis system malfunction, Hill Start Assist Not Available, Steering Assist Fault, and Service Required messages were displayed on the instrument panel. The dealer was contacted and informed of the failure. The dealer suggested that the contact take the battery to be tested. The battery was tested and there was no failure found with the battery. The vehicle had not been taken to the dealer to be diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 150,000.

The transmission is idle high and hard and yes it is available for inspection My safety and the safety of other is the car jerks and it accelerate unvoluntary Yes it was confirmed by a certified mechanic No it have not been inspected my manufacturer or others No there is no warning lights or messages that prior to failure

The contact owns a 2014 Ford Fusion. The contact stated while driving 10 MPH, the vehicle was shaking with a rattling sound coming from the engine compartment. A code was displayed on the instrument panel; however, the contact was unsure what the code referenced. The contact stated that the vehicle was not safe to drive. The contact stated that an independent mechanic inspected the vehicle and diagnosed that there was a coolant leak, causing the coolant and oil to mix that caused engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The mechanic informed the contact of NHTSA Campaign Number: 17V209000 (Engine and Engine Cooling); which was related to the failure experienced. The manufacturer was informed of the failure and confirmed that the VIN was not included in NHTSA Campaign Number: 17V209000 (Engine and Engine Cooling) and opened a case. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 188,000.

Electric power steering failed, causing the car to be almost impossible to steer while driving. This is a known issue with these Ford vehicles. Car shows steering failure and stabilitrak warning-these did not come on until the failure.

The rear view mirror and side mirrors become dark after the sun sets and it becomes extremely hard and dangerous to judge vehicles behind you as you try to merge onto any road that has moving traffic.