2009 Dodge Ram 1500

Defect. Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange.

Risk. If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.

Remedy. On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.

Defect. Chrysler is recalling certain model year 2009-2010, Ram 1500 and Dodge Dakota trucks, manufactured from July 1, 2009, through November 30, 2009, because the rear axle pinion nut may loosen due to a lack of adhesive.

Risk. If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.

Remedy. Chrysler will notify owners, and dealers will install a pinion nut retainer, free of charge. The recall began on June 17, 2013. Owners may contact Chrysler at 1-800-247-9753.

In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 …

In a letter dated October 2, 2012, Chrysler Group LLC (Chrysler) submitted a Defect Information Report (DIR) to NHTSA identifying a safety defect in approximately 48,058 vehicles built with an axle pinion nut that can loosen, which could result in lock-up of the rear axle and/or separation of the rear drive shaft from the rear axle (NHTSA Recall No. 12V-474).The vehicles involved in this recall are model year (MY) 2009 and MY 2010 Dodge Ram 1500 (46,677) and Dodge Dakota (1,381) vehicles manufactured between July 1, 2009 and November 30, 2009 built with 9.25? rear axles built at Chrysler?s …

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, …

RAM: THIS BULLETIN PROVIDES PROCEDURE ON REPROGRAMMING POWER TRAIN MODULE WITH THE MOST UPDATED SOFTWARE *CN UPDATED 10/2/15 *CN

Involved in an accident 2/09/26. Air bag did not deploy. Fractured sternum as a result.

- Week of October 6th 2025 I experienced 4-wheel drive issues and lights. - October 13th 2025 dropped off to dealer for review - October 14th 2025 dealer deemed not safe to drive and ordered parts under warranty repair. - following weeks went on with parts being backordered. - after having to push the dealer for updates for weeks on December 22nd 2025 I informed Stellantis Customer Service US. - Customer service looked into and gave me the same delayed responses for weeks now "I hope you're doing well. I'm following up regarding your case. There is no definite ETA for the part. Our parts team is working to get it expedited. I will receive another update in 5-6 business days and will follow up with you then. If you have any questions please don't hesitate to contact me." - Still today Stellantis cannot give me a date when my truck will be repaired. Near 4months later...

The contact owns a 2009 Dodge Ram 1500. The contact stated that while driving at an undisclosed speed, the MTC unit failed to function as intended. The contact stated that while the system was enabled, the system independently switched between the heating and cooling systems. In addition, the defrost system was deactivated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced an unknown recall; however, the VIN was not under recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 158,000.

The left turn signal not working properly. When I put my left turn signal the amber light front of the truck not working instead the high bean works as turn signal also amber running light not working. Is so frustrating getting pulled over by a cop for that reason!!!

Odometer Fraud. The contact purchased a 2009 Dodge Ram 1500. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 131,000 and at the time of registration, it was discovered on the title that the mileage was 211,492.

CARFAX GOT THE WRONG MILEAGE 1 HAVE 185292 AND I CAN SEND PICTURES

Heating & ventilation, I have lost heat in my truck, issues with fuel pump/filte where truck won’t start, and had the water pump had to be replace. I believe the majority of the things listed had recalls. What is included in the recalls and can a recall be replaced more than 1x?

My trucks ignition switch just stops turing my truck on I've seen multiple complaints about the same issue leaves you stranded

The contact owns a 2009 Dodge Ram 1500. The contact stated that upon inspecting the vehicle, it was discovered that the fuel tank was not completely secured to the vehicle and was hanging down from the subframe. The failure was caused by a corroded subframe attaching the fuel tank straps to the vehicle. Both fuel tank straps had failed due to the subframe corrosion. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact was informed that the VIN and vehicles from the state of Kansas were not included in NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 149,000.

The shifter began changing gears on its own. Before the recall came out my mechanic checked and there was no recall for this until 2018. I was never notified of the recall. Then on rear axle pinion nut. The nuts were installed without the proper amount of adhesive. Consequently, the nuts can loosen, and cause the rear axle to lock up, causing a loss of vehicle control. I was never notified of and the rear end came down while on the freeway. The fuel tank began leaking I repaired this before the recall came out. I submitted a reimbursement request they denied me stating my car was over 7 years old.

Gas tank straps causing fuel tank to drop from under truck. The Chrysler recall 18V160000 or U04 covers this problem but they tell me my VIN is not included in the recall.I live on the Outer Banks of NC and we at times have salt water standing on the side of the roads.and this is the same problem in this recall. I am Deputy Chief of the local fire department and we have 4 of the trucks and all have the same problem also. My truck has 150,000 miles on it and is well taken care of. This truck has a NC DOT inspection every year.

The brakes locked up twice since purchased the vehicle. The left side locking up would have caused me to veer into oncoming traffic. Years late when the right side locked up would've have veered right causing an accident. This last time the brakes aren't releasing. This happening 3 times has reproduced itself. The 1st time I took it to a dealership. No warning lamps were showing or any symptoms for this happening. I've purchased the lifetime warranty on this vehicle.

The rear axle pinion nut came off and the rear axle locked up. Driveshaft dropped to the street, breaking the transfer case. Incident resulted in an immediate loss of control. Driver behind me saw the driveshaft fall and braked to avoid contact with my vehicle. Luckily, I was driving about 25 miles per hour and was able to come to a stop on the roadside without wrecking. I later learned that in late 2015, Chrysler was supposed to notify owners of the defect concerning the rear axle pinion nut. I never received that notification or any other recall notice regarding my vehicle. The local Dodge dealer has told me to have my vehicle towed to them. They said the damage will be evaluated and Chrysler will determine if they should pay for the necessary repairs. I believe they should, since I was never notified of the problem with the rear axle pinion nut. The consumer stated the District Manager at the dealership refused to repair the vehicle. The reasons for not repairing the vehicle were the necessary parts couldn't be found, the recall was too long ago, and you should have brought it in for repairs earlier when the recall notice went out.

The contact owns a 2009 Dodge Ram 1500. The contact received notification of NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline). The contact stated that the sub frame was rusted. The vehicle was taken to the dealer and to Hudson Chrysler Jeep Dodge RAM (625 NJ-440, Jersey City, NJ 07304) on two separate occasions and the dealers declined to perform the recall repair because the sub frame was rusted. The manufacturer was made aware of the failure and informed the contact that he was responsible for the sub frame replacement. The failure mileage was 165,851. Case number [XXX] . INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).”

HAD TRUCK IN FOR SERVICE AT THE LOCAL DODGE DEALERSHIP. WAS INFORMED THAT THE FRAME WAS SEVERELY RUSTED THROUGH AND WAS UNSAFE TO DRIVE. THE TRUCK HAS 80,000 MILES ON IT GARAGE KEPT. THIS SHOULDN'T BE HAPPENING ON A 12 YEAR OLD VEHICLE. CONTACTED DODGE AND WAS ASSIGNED A CASE NUMBER 79046014. HOWEVER I WAS TOLD BY THEM SORRY FOR YOUR BAD LUCK. NOTHING TO BE DONE HERE. I FIND THIS UNACCEPTABLE. THANKS FOR ANY HELP

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. THE CONTACT STATED WHILE DRIVING 30 MPH, THE VEHICLE LOSS MOTIVE POWER AND STALLED. THE CONTACT HAD THE VEHICLE TOWED TO BLUEBONNET CHRYSLER DODGE (547 S SEGUIN AVE, NEW BRAUNFELS, TX 78130) TO BE DIAGNOSED. THE CONTACT WAS INFORMED THAT THE FAILURE WAS AN ELECTRICAL FAILURE AND AN UNKNOWN MODULE FAILURE. THE VEHICLE WAS REPAIRED HOWEVER, THE FAILURE RECURRED AFTER SEVERAL MONTHS. THE VEHICLE WAS TOWED BACK TO THE SAME DEALER HOWEVER, THE VEHICLE WAS NOT DIAGNOSED NOR REPAIRED. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 198,000.

IN 2020 MY 2009 DODGE RAM 1500 4X4 BEGAN CHUCKING AND LURCHING WHEN CORNERING. I PARKED THE TRUCK AT HOME AND HAD IT TOWED TO THE SHOP. THE MECHANICS PULLED THE REAR AXLE APART AND FOUND SHAVINGS AND LARGE CHUNKS OUT OF THE PINION GEAR AND SUBSEQUENTLY MANY OF THE OTHER GEARS AND COMPONENTS IN THE REAR AXLE. THE MECHANIC SAID I WAS LUCKY IT DID NOT LOCK UP WHILE DRIVING. BEING THAT I PURCHASED IT USED DODGE DID NOTHING TO HELP ME. MY AFTER MARKET WARRANTY WAS OUT, SO I HAD TO PAY OVER $2,200 OUT OF POCKET TO HAVE IT REBUILT BECAUSE DODGE STOPPED MANUFACTURING THE AXLE ASSEMBLY OF THE 3.92 GEAR RATIO. I GOT IT BACK AND DROVE IT MINIMALLY FOR THE PAST SIX MONTHS. TODAY 3/16/2021 I DECIDED TO DRAIN AND REFILL THE REAR AXLE WITH THE SPECIFIED DODGE LUBRICANTS. WHILE DRAINING THE AXLE FLUID I FOUND A SHARD OF METAL APPROXIMATELY 1" X 1/8" X 1/16". VERY DISAPPOINTED. NOW I AM LOOKING AT ANOTHER $2,200 REBUILD AND THE LOSS IF MY VEHICLE AGAIN FOR SEVERAL WEEKS. THIS IS A SAFETY ISSUE AND DODGE NEEDS TO ISSUE A RECALL TO ALL DODGE OWNERS WHOM THIS AFFECTS, NOT JUST ORIGINAL OWNERS. I HAVE REPAIR RECIEPT DUCUMENTATION IF NEEDED.

THE KEY FALLS OUT OF IGNITION WHILE DRIVING ,ALSO THE SHIFTER CAN BE MOVED WITHOUT KEY IN IGNITION IT IS THE SAME PROBLEM AS 10V200000 RECALL BUT MY TRUCK ISN'T INCLUDED IN RECALL SEARCH BUT IT SHOULD, I KNOW DODGE RETOOLED IN THE MIDDLE OF THE 2009 YEAR AND THE PARTS ON MY TRUCK MATCH A 2010 YEAR MODEL FOR WHICH THE RECALL IS INTENDED.THIS IS A DANGEROUS SITUATION THAT ISN'T BEING ADDRESSED BY SEEMINGLY A CLERICAL ERROR.

WHILE DRIVING MY TRUCK IT JUST SHUT OFF, DIED AND WOULD NOT START BACK UP. THIS WAS VERY DANGEROUS! GOING 65 MILES AN HOUR, IN THE CENTER LANE TRYING TO GET OVER TO THE SIDE OF THE ROAD...SAFELY! I TRIED TO START THE TRUCK...EVERYTHING CAME ON AS NORMAL, BUT WOULD NOT CRANK. I HAD TO HAVE THE TRUCK TOWED $$. THE ALTERNATOR WAS REPLACED $$. TRUCK STILL WOULD NOT START. IT WOULD NOT CRANK, YOU COULD HEAR CLICKING UNDER THE HOOD AND YOU COULD HEAR THE FUEL PUMP COME ON. I WAS TOLD IT WAS THE WIN MODULE WHICH COST ME $870.00!! (WIN MODULE AND PROGRAMMING) EVIDENTLY THIS IS A COMMON PROBLEM WITH DODGE TRUCKS. WHAT DOES IT TAKE TO HAVE A RECALL ON THIS PART?!! DOES IT TAKE A CERTAIN NUMBER OF CRASHES OR DEATHS? ALL IN ALL IT COST ME ABOUT $1500, BUT IT COULD HAVE COST ME MY LIFE, MY GIRLFRIENDS LIFE, AND POSSIBLY PEOPLE IN OTHER VEHICLES THAT WERE DRIVING AROUND ME. I HAVE RESEARCHED AND FOUND THAT OTHER DODGE VEHICLES WERE AFFECTED WITH THIS FAULTY PART AND THERE WAS A RECALL PUT OUT. THERE AGAIN, I ASK DODGE....WHAT DOES IT TAKE TO HAVE A RECALL ON THIS PART FOR RAM 1500 TRUCKS?? I HOPE THAT ALL OWNERS THAT HAD OR IS HAVING THIS PROBLEM TO FILE A REPORT! PLEASE! READ ALL THE DISCUSSIONS SIMILAR TO MINE ON DODGE FORUM. AGAIN, PLEASE REPORT THESE TYPES OF PROBLEMS, THEY WILL NOT KNOW HOW MAY VEHICLES ARE AFFECTED IF IT'S NOT REPORTED. YOU MAY SAVE SOMEONE'S LIFE.

THE VEHICLE DIES AND EVERYTHING BECOMES DISABLED INCLUDING ALL OUTSIDE LIGHTS INCLUDING THE EMERGENCY FLASHERS. ENGINE TURNS OFF AND THEN WILL NO RESTART. SOMETIMES THIS PROBLEM IS INTERMITTENT BUT LATER COMPLETELY FAILS. THIS IS THE SECOND TIME IN 2 YEARS THAT THIS TRUCK HAS DIED. THE FIRST TIME IT HAPPENED ON A FOGGY NIGHT. TH ENGINE AND ALL LIGHTS TURNED OFF AT CRUISING SPEED LEAVING ONLY SOME INSTRUMENT CLUSTER LIGHTS ON WHICH ENDS UP BEIN EVEN MORE OF A DISTRACTION FROM THE SUDDEN OUTSIDE DARKNESS. AFTER TRYING TO FIND THE SIDE OF THE ROAD IN THE DARKNESS, THEN YOUR EMERGENCY FLASHERS DO NOT WORK LEAVING THE TRUCK JUST A DARK TARGET IN THE ROAD. THIS IS EXTREMELY DANGEROUS. RECENTLY THIS SAME TRUCK DIED A SECOND TIME BUT THANKFULLY AFTER FILLING UP A A GAS STATION. AFTER A QUICK SEARCH ONLINE, THIS HAS HAPPENED TO MANY MANY DODGE RAM OWNERS FROM 2009 TO 2016 MAYBE NEWER VEHICLES AND ALSO OTHER MODELS. THE DEALER REFERS TO THE PROBLEM BEING WITH A TOTALLY INTEGRATED POWER MODULE (TIPM). I JUST READ THAT THERE HAVE BEEN MANY COMPLAINTS FILED ALREADY EVEN WITH THE NHTSA. PLEASE CONTINUE TO INVESTIGATE, THIS IS A MAJOR SAFETY ISSUE.

CLICKING NOISE UNDER DASH EVEN WHEN THE TRUCK IS OFF, NO HEAT, STEAMING UP WINDOW, CHECKED HEATER CORE AND ITS GOOD HAD THE WHOLE SYSTEM FLUSHED. STILL NOT RITE. ALSO CRUZE CONTROL NOT WORKING.

SEAT BELT WILL NOT STAY LATCHED

THE HEATER DOES NOT WORK AND I WAS TOLD BY DODGE DEALER MECHANIC THAT THE MAIN HOUSING UNIT DOOR FOR THE HEATER AND AC USUALLY BREAKS.

TIPM FAILURE-TOTALLY INTEGRATED POWER MODULE ABRUPTLY FAILED WITH NO WARNING SIGNS OR NOTHING.. I TOOK IT IN LIGHT TO LIGHT SYSTEMS NOT WORKING.. WINDOWS, HEADLIGHTS, THIS IS HAZARDOUS FOR DRIVERS.. CALLED THE DEALERSHIP AND WAS TOLD THERE IS NO RECALL NOR HAS THERE BEEN A PRIOR ISSUE.. THEY SAID MY VIN NUMBER [XXX] HAS NO RECALL THEY FIXED THE HVAC I WAS IN MOTION ON A HIGHWAY.. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

EXHAUST MANIFOLD BOLTS BROKEN. CAUSES TICKING ON START UP. ITS BAD ON YOUR ENGINE AND IT WON'T PASS EMISSIONS. HOW HAS AN INVESTIGATION NOT BEEN DONE ON THIS?! SO MANY COMPLAINTS ON FORUMS, FACEBOOK, EVEN ON HERE. WITH LESS THEN 80K MILES THIS IS RIDICULOUS

EXHAUST MANIFOLD LEAK. BOLTS BROKE OFF

RECALL BELOW MANUFACTURER REFUSES TO REPURCHASE AS STATED BELOW THANK YOU FEB 05,2013 MANUFACTURER RECALL NUMBERN08 NHTSA RECALL NUMBER13V-038 RECALL STATUSRECALL INCOMPLETE SUMMARY THE REAR AXLE PINION NUT ON ABOUT 278,000 OF THE ABOVE VEHICLES MAY LOOSEN DUE TO UNDERSIZED PINION SHAFT SPLINES. SAFETY RISK A LOOSE PINION NUT COULD CAUSE THE REAR AXLE TO SEIZE OR CAUSE THE DRIVESHAFT TO SEPARATE RESULTING IN A LOSS OF MOTIVE POWER. EITHER SITUATION COULD CAUSE A CRASH WITHOUT WARNING. REMEDY THE REAR AXLE PINION NUT MUST BE INSPECTED. REAR AXLES FOUND WITH A LOOSE PINION NUT AND/OR A SEIZED UP REAR AXLE ASSEMBLY MUST BE RECONDITIONED. REAR AXLES WITH A 6-POINT PINION NUT THAT HAS NOT LOOSENED WILL HAVE A PINION NUT RETAINER INSTALLED. ALL REAR AXLES WITH A 12-POINT PINION NUT REQUIRE NO ADDITIONAL REPAIRS. TO REQUEST A PRELIMINARY REPURCHASE ESTIMATE FOR YOUR VEHICLE FOLLOW THIS LINK HTTP://WWW.FCAUSREPURCHASE.COM/

HEATER MOTOR AND AIR CONDITIONING UNIT NOT WORKING BY CONTROLS

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. THE CONTACT STATED WHILE DRIVING 45 MPH, THE HEATER FAILED TO OPERATE AS DESIGNED AND THE CONTACT WAS UNABLE TO SEE THE ROADWAY CLEARLY. THE VEHICLE WAS TAKEN TO INDEPENDENT MECHANIC AND HAD THE HEATER CORE AND THERMOSTAT REPLACED. THE CONTACT STATED HE CONTINUED TO EXPERIENCE THE FAILURE. THE VEHICLE WAS NOT DIAGNOSED NOR REPAIRED. A DEALER WAS NOT CONTACTED. UPON INVESTIGATION, THE CONTACT ASSOCIATED THE FAILURE WITH NHTSA CAMPAIGN NUMBER: 09V158000 (EQUIPMENT) HOWEVER THE VIN WAS NOT INCLUDED. THE MANUFACTURER HAD NOT BEEN INFORMED OF FAILURE. THE FAILURE MILEAGE WAS UNKNOWN.

FRAME APPEARS BAD IN SEVERAL SPOTS, SO MUCH RUST. RUST ON VIRTUALLY EVERY PANEL ON THE BODY. ABOVE WINDSHIELD MIDDLE OF OF DOOR. IT LITERALLY EVERYWHERE. THE LEATHER SEATS ARE JUNKED. I UNDERSTAND IT'S A 11 YEAR OLD VEHICLE BUT TRUCK IS FALLING APART EVERYWHERE YOU LOOK. YOU CAN LOOK INSIDE THE TRUCK HAS BEEN VERY WELL CARED FOR DRIVES HORRIBLY MAKES SO MANY SOUNDS FROM RATTLES TO CLUNKS.MOSTLY ON 2 LANE ROADS AFRAID TO DRIVE MUCH INTERSTATE AFTER HAVING TIRE BLOWING OUT SIDEWALK GOING DOWN INTERSTATE EATS TIRES ON THE INSIDE ON BOTH SIDES BEEN LINED UP STILL SAME RESULT. EXHAUST MANIFOLDS LEAKING BAD.

TRUCK SOMETIMES SHOWS LIFE WHEN IN ACCESSORY BUT WHEN PUT TO ON TRUCK DIES COMPLETELY, OBVIOUSLY NOT GOING TO TURN OVER WITH NO SIGN OF LIFE. MINUTES LATER I CAN COME BACK AND START IT NO PROBLEM. HEADLIGHTS WILL CONSISTENTLY STUTTER OR EVEN TURN ON OR OFF WHILE PARKED OR MOVING. LASTLY WHILE DRIVING SOMETIMES ALL POWER AND ELECTRICAL SHUTS OFF AND TRUCK IS COMPLETELY DEAD WHILE GOING ANY SPEED. I HAVE NOT FOUND A CERTAIN SPEED IT DIES BECAUSE IT HAS SHUT OFF IN PARKING LOTS AND GOING DOWN HIGHWAY. POWER STEERING IS GONE AND ITS SCARY TO PULL OF SIDE OF ROAD WHEN SOME ROADS DON'T HAVE MUCH TO WORK WITH OR GOING AT HIGHWAY SPEEDS AND LOSING ALL POWER.

DRIVING LIKE ANY OTHER DAY WHEN TURNING ONTO STATE ROUTE. HEARD A LOUD POP SOUND AND MY REAR TIRES LOCKED UP. LUCKILY THE ONCOMING TRAFFIC JUST MISSED US (HAD MY DAUGHTER IN THE VEHICLE WITH ME). CERTIFIED MECHANIC SAYS IT IS THE FRONT PINION BEARING THAT WENT OUT CAUSING THE TIRES TO LOCK UP. IT HAPPENED WHEN I WAS GOING AT A RELATIVELY SLOW SPEED BUT I DID SLIDE INTO ONCOMING TRAFFIC.

THERE IS A CLICKING IN THE DASHBOARD FOR A FEW MINUTES I TRIED COMMON PROBLEMS THAT WOULD MAKE THAT NOISE ARE THE BLOWER MOTOR OR BLEND DOOR ACTUATOR REPLACED THEM AND STILL THE CLICKING HAPPENS BUT A CAUSE OF THIS CLICKING THE AIR WON'T WORK OR IS GOOD VERY SLOWLY AND CAUSES MY FRONT WINDSHIELD TO FOG UP TO THE POINT AT WHICH I CAN'T SEE OUT THE FRONT WHEN MY TRUCK IS NOT MOVING SAME RESULT I. THE CITY OR FREEWAY TURNING OR ON THE STREET IT WILL JUST TURN ON AND OFF AT RANDOM POINTS AND THE CLICKING SOUND IS COMING FROM THE LITTLE BLACK BOX THAT I CAN'T FIND D ANY INFORMATION ON

WHILE DRIVING ON THE HWY AT 73 MPH MY TRUCK RANDOMLY WENT FROM BEING IN AUTOMATIC TO MANUAL, STUCK IN 4TH GEAR. IT WOULD NOT COME OUT OF 4TH. AFTER ALMOST BEING REAR ENDED DUE TO MY ABRUPT DROP IN SPEED I WAS ABLE TO COAST AND THEN BRAKE TO A STOP ON THE SIDE OF THE BUSY HWY. I HAD TO TURN THE TRUCK ALL THE WAY OFF AND THEN BACK ON TO REDET IT. AS I CRAWLED AT A SLOW SPEED TO GET OFF THE NEAR EXIST IT DID IT AGAIN. *TR

SEVERE CORROSION RESULTING IN COMPROMISED STRUCTURAL FRAME INTEGRITY NEAR WHERE THE REAR BUMPER AND TOWING PACKAGES ATTACHES TO THE FRAME. APPEARS TO BE THE RESULT OF A FRAME REINFORCEMENT ON THE INSIDE OF THE FRAME THAT WAS NOT PROPERLY COATED WITH A RUST INHIBITOR AT THE FACTORY. MOISTURE LIKELY PENETRATED THE SPACE BETWEEN THE TWO METAL PIECES AND CAUSED COMPLETE RUST-THROUGH, COMPROMISING THE INTEGRITY OF THE REAR OF THE FRAME. THIS COULD BE A SERIOUS SAFETY ISSUE SINCE BUMPERS AND TOWING PACKAGES MOUNT TO THE FRAME IN THIS EXACT SPOT. AT HIGHWAY SPEEDS, BUMPERS OR TRAILERS IN TOW COULD BREAK AWAY FROM THE VEHICLE AND BECOME DANGEROUS PROJECTILES ON THE ROAD. THIS ISSUE WAS OBSERVED DURING ROUTINE MAINTENANCE TO THE REAR DIFFERENTIAL. IT HAS LIKELY BEEN ONGOING FOR MONTHS. THE UNDERNEATH SIDE OF THE VEHICLE IS REGULARLY WASHED IN THE WINTER AND SPRING TO REMOVE DE-ICER THAT WAS APPLIED TO THE ROAD DURING WINTER STORMS. BOTH SIDES OF THE FRAME HAVE SEVERE CORROSION IN THE SAME SPOT. THE LEFT-SIDE FRAME HAS WORSE CORROSION THAN THE RIGHT SIDE. THE SUPPORT METAL IS VISIBLE ON THE RIGHT SIDE FRAME AND CAN BE SEEN IN THE IMAGES ATTACHED.

THE TOTAL INTEGRATED POWER MODULE FAILED AND IT'S A COMMON PROBLEM IN ALL CHRYSLER AND DODGE VEHICLES. THAT FAILS THE ENGINE RUNS ROUGH, AC, BRAKE LIGHT, TURN SIGNAL, HORN, WIPERS, STOP WORKING AND TRANSMISSION STAYS IN 1ST GEAR. THE LIGHTS ON THE DAS STAY ON: BRAKES, ABS, SEATBELT, CHECK ENGINE LIGHT AND AIR BAG... THIS IS AN SPECIALLY WHEN THE MODULE FAILS WHILE DRIVING IN THE ROAD. DEALERS KNOW IT'S A COMMON PROBLEM BUT THEY RATHER HAVE CUSTOMER PAY FOR A NEW TIPM.

VEHICLE POWER FAILURE WHILE MOVING ON THREE OCCASIONS. VEHICLE LOSES ALL POWER INCLUDING STEERING. HAVE ALREADY REPLACED SEVERAL SENSORS AND THE PCM WITH NO SUCCESS. VERY HAZARDOUS TO ME AND ALL MOTORISTS AROUND ME.

FELT VIBRATION IN VEHICLE WHILE DRIVING ABOVE 30MPH. WAS DRIVING DOWN A CITY AT APPROXIMATELY 40MPH AND A VERY LOUD BOOM HAPPENED AND MY TRUCK JOLTED TO A STOP. THE REAR AXLE LOCKED UP BECAUSE THE PINION NUT BACKED OFF.

THERE WAS A RECALL AROUND 2012-2013 FOR 2009 DODGE RAM 1500 PICK UP TRUCKS BECAUSE SOME PINION NUTS COULD COME LOOSE. I HAD THE RECALL PERFORMED AS SOON AS I RECEIVED THE NOTICE. THE FIX FOR THIS WAS TO INSTALL A RETAINER THAT WOULD NOT ALLOW THE NUT TO LOOSEN. THIS WEEK, 12/16/19, I WENT TO REPLACE MY PINION SEAL AS I NOTICED LEAKING AT THE SHAFT. I FEEL THAT THE RETAINER THAT WAS USED TO HOLD THE NUT IN PLACE IS DEFECTIVE AND NOT A SUFFICIENT FIX AS THE NUT HAS DEFINITELY MOVED SINCE THE RECALL WORK WAS PERFORMED. THERE ARE MOST LIKELY STILL TRUCKS ON THE ROAD WHERE A DANGEROUS CONDITION IS BEGINNING TO DEVELOP AGAIN. I NOTICED THAT THE PINION NUT HAD ONLY ONE THREAD SHOWING AND TOOK VERY LITTLE FORCE TO REMOVE. AS I DID NOT KNOW HOW TO REMOVE THE RETAINER "HOLDING" THE NUT IN PLACE, I USED A HAMMER AND A PUNCH TO TRY TO SPIN IT. THE RETAINER AND THE NUT MOVED WITH VERY LITTLE EFFORT. THERE WAS ONLY ONE THREAD ON THE SHAFT SHOWING BEFORE I LOOSENED IT. I CALLED A DEALERSHIP AND THEY TOLD ME TO BRING IT IN THE NEXT MORNING. THE NUTS ON THESE ARE ALL INDIVIDUALLY ADJUSTED UNTIL THE BEARING YIELDS A CERTAIN RESISTANCE AND THIS CAN ONLY BE DONE WITH THE COMPONENTS IN THE REAR OF THE DIFFERENTIAL REMOVED. THE SERVICE MANAGER IS STARTING TO TALK ABOUT "NORMAL WEAR AND TEAR" SINCE THE RECALL. MY CONTENTION IS THAT THE ORIGINAL RECALL WAS NOT PERFORMED PROPERLY BY A DEALER WHEN THE RECALL WAS DONE. WE CAN NOT KNOW WHAT WAS NORMAL WEAR AND TEAR IF THE NUT HAS BEEN COMING LOOSE FOR A

THE FUEL GAUGE DOES NOT WORK, HASN'T WORKED IN OVER 2 YEARS WE HAVE BROKE DOWN ON THE SIDE OF THE ROAD THINKING WE STILL HAD GAS! VERY UNSAFE AND VERY DANGEROUS!

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. THE CONTACT STATED THAT THE REAR AXLE PINION FAILED DESPITE THE FACT THAT THE PART WAS SERVICED PER NHTSA CAMPAIGN NUMBER: 12V474000 (POWER TRAIN). PARKS MOTORS (11987 US-54, AUGUSTA, KS 67010, (316) 775-6365) PERFORMED THE RECALL REPAIR. THE CONTACT SPOKE WITH THE SAME DEALER AND WAS INFORMED THAT THERE WERE NO WARRANTIES ON RECALLS AND OFFERED NO ASSISTANCE. THE CONTACT TOOK THE VEHICLE TO AN INDEPENDENT MECHANIC WHERE IT WAS DETERMINED THAT THE REAR AXLE PINION WAS DAMAGED AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS APPROXIMATELY 260,000.

WAS DRIVING ABOUT 25 MILES PER HOUR WHEN I HEARD A LOUD POP OR BANG. THE TRUCK FELT SLIGHTLY FUNNY. PUT INTO NEUTRAL AND COASTED TO AN EMPTY PARKING LOT. APPROX 75 TO 100 FEET AND STOPPED. WHEN I TRIED TO MOVE THE VEHICLE AGAIN IT WOULD LOCK UP WITHIN A FOOT OF TRAVEL. HAD TO TOW IT TO A GARAGE. THE REAR AXLE IS LOCKED UP THE REAR FLANGE IS SITTING AT A CROOKED ANGLE.

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. THE CONTACT STATED THAT THE FRAME NEAR THE TWO REAR WHEELS WAS RUSTED OUT. THE FAILURE WAS DISCOVERED BY BOB-BOYD CHRYSLER JEEP DODGE RAM (2810 N COLUMBUS ST, LANCASTER, OH 43130, (740) 653-2277). THE CONTACT TOOK THE VEHICLE TO AN INDEPENDENT MECHANIC AND WAS QUOTED A REPAIR COST OF $2,200. THE VEHICLE WAS SCHEDULED TO BE REPAIRED AROUND OCTOBER 7, 2019. THE MANUFACTURER HAD NOT BEEN CONTACTED. THE FAILURE MILEAGE WAS 131,000.

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. WHILE DRIVING APPROXIMATELY 70 MPH, THE VEHICLE SHIFTED INTO FOURTH GEAR INDEPENDENTLY. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE SOLENOID NEEDED TO BE REPAIRED. THE VEHICLE WAS REPAIRED; HOWEVER, THE FAILURE RECURRED THREE YEARS LATER. THE VEHICLE WAS TAKEN BACK TO THE INDEPENDENT MECHANIC, BUT A DIAGNOSIS WAS NOT PROVIDED. THE VEHICLE WAS NOT REPAIRED. THE DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 183,000.

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. WHILE THE VEHICLE WAS PARKED IN THE GARAGE, THE ODOR OF FUEL WAS PRESENT. UPON INSPECTION, THE CONTACT NOTICED A HOLE IN THE FUEL TANK, WHICH CAUSED FUEL TO LEAK OUT. THE CONTACT INDICATED THAT THE HOLE HAD BEEN BLOWN OUT OF THE TANK AND WAS THE SIZE OF A TENNIS BALL. THE VEHICLE HAD BEEN PARKED IN THE GARAGE FOR MONTHS AND HAD NOT BEEN DRIVEN. THE CAUSE OF THE FAILURE WAS NOT DETERMINED. THE LOCAL DEALER AND MANUFACTURER WERE NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 206,000.*DT

STARTED VEHICLE AND THE FOLLOWING LIGHTS ON THE DASH WERE LIT AIRBAG, TRACTION CONTROL, ESP BAD, ANTILOCK BRAKE, AND THE WIPERS WOULDN'T WORK, ALSO THE POWER OUTLET THAT ONLY RUN WHEN THE KEY IS TURNED, I DROVE THE VEHICLE AND ALL FORE MENTIONED ITEMS WENT BACK TO NORMAL. THIS HAS HAPPENED ON SEVERAL OCCASIONS AND THE LENGTH OF TIME THEY ARE LIT/ NOT FUNCTIONING VARIES FROM A COUPLE OF.MINUTE TO A COUPLE OF WEEKS.

THE BOTTOM RIGHT SIDE RUSTING OUT

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. WHEN THE VEHICLE WAS PURCHASED, THE CONTACT WAS INFORMED THAT THE VEHICLE DID NOT HAVE ANY ELECTRIC POWER STEERING SENSORS. THE VEHICLE WAS DRIVEN TO N.E. AUTO SALES (3232 N MAIN ST, ROCK CREEK, OH 44084, (440) 563-3303) TO HAVE THE EPS SENSORS INSTALLED. THE CONTACT WAS INFORMED THAT THE DEALER REPROGRAMMED THE SENSORS WHEN THEY REMOVED THE REAR TIRES; HOWEVER, THE CONTACT STATED THAT THERE WERE NO SENSORS WHEN THE VEHICLE WAS BROUGHT IN AND THERE WERE NONE INSTALLED AFTERWARDS. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND DID NOT ASSIST. THE VIN WAS UNKNOWN. THE FAILURE MILEAGE WAS 184,011.

TL* THE CONTACT OWNS A 2009 DODGE RAM 1500. THE CONTACT STATED THAT THE HEATER, DEFROSTER, AND AIR CONDITIONER MALFUNCTIONED. IN ADDITION, THE TRANSMISSION FAILED WHILE THE VEHICLE WAS TURNING INTO A DRIVEWAY. THE VEHICLE WAS TOWED TO BUTTE'S MILE HIGH CHRYSLER JEEP DODGE RAM (3883 HARRISON AVE, BUTTE, MT 59701,(406) 565-4410) AND REPAIRED UNDER WARRANTY. THE CONTACT HAD TO PAY FOR A LOANER VEHICLE BECAUSE THEY EXCEEDED THE MILEAGE LIMITATION DUE TO THE DISTANCE FROM THEIR HOME TO THE DEALER. THE CONTACT ALSO STATED THAT THE HEADLIGHT SWITCH DID NOT ACTIVATE THE HEADLIGHTS; THEREFORE, THE CONTACT HAD TO USE THE HIGH BEAMS. THE CONTACT REPAIRED THE HEADLIGHTS THEMSELVES. THE HEATER AND AIR CONDITIONER WERE NOT UNDER WARRANTY AND WERE REPAIRED BY THE CONTACT, BUT THE FAILURE RECURRED. THE MANUFACTURER STATED THAT THERE WERE NO RECALLS ON THE VEHICLE. THE FAILURE MILEAGE WAS 76,000.

***NOTE - I ENTERED CLOSEST MODEL YEAR THAT YOUR ON-LINE FORM WOULD ALLOW.*** FRONT FUEL TANK STRAP FELL OFF OF 2010 DODGE RAM 1500. I NOTICED THE FUEL TANK HANGING BELOW THE FRAME WHILE THE VEHICLE WAS PARKED IN MY DRIVEWAY. I DO NOT KNOW WHEN THE STRAP CAME OFF. THIS IS A KNOWN DODGE RAM 1500 RECALL FOR THE SAME MANUFACTURING DATE RANGE OF MY VEHICLE (2010) IN THE STATE I LIVE (INDIANA) BUT NOT ON MY SPECIFIC VIN NUMBER.