2018 Chrysler Pacifica complaints

Odometer Fraud. The contact purchased a 2018 Chrysler Pacifica. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 42,000 and at the time of registration, it was discovered that the mileage was 110,000.

The contact owns a 2018 Chrysler Pacifica. The contact stated while driving 75 MPH, the vehicle lost motive power. There was no warning light illuminated. The vehicle was able to restart. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that there was a misfire in cylinder #3. The vehicle was repaired; however, the failure recurred. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 105,769.

Head gasket needing replacement due to cylinder 5 misfire at 7 years/55,000 miles. This appears to be a defect in the engine for this year and 2019 year. I am willing to be a named defendant if there is an opportunity to go after Chrysler for this as they are offering no assistance for this known defective engine.

I had my Chrsyler Pacifica since Nov 2018 . Recently I heard a noise and Dealer suggested change in Transmission . Ever since I have problem with Car stopping im middle of road , towed 5 times to dealer and dealer says he fixed it but still same problem with vehicle stalling happen. yesterday (05/20), delaer informed that vehicle stalled in road while they did test drive after they fixed the problem. I am scared to drive this car anymore. Dealser did not want to loan their car as well anymore , I am without car for more than 30 days during this all 5 incidents .

The contact owns a 2018 Chrysler Pacifica. The contact stated that while driving at an undisclosed speed, the vehicle stalled, with a misfire coming from the engine. The contact stated that the check engine warning light was illuminated. The vehicle was able to restart. The vehicle was taken to the dealer, where it was diagnosed and determined that the cam shaft had failed and needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 143,000.

The oil filter housing adapter is made of plastic. They frequently break and mix the coolant and oil, leak oil out of the system and into the heads. This is a known problem and engineering solution of an aluminum housing has been made. They should recall this part and replace or reimburse for people who have had to do this already.

Brought Pacifica into the dealer because of "check engine" light. Car had some shaking too upon startup. There was also some "ticking" sounds in the dashboard. Dealership told me that the head gasket of the first (and likely third) needed to be replaced. There was an engine 3 misfire per diagnostics. I was quoted at $4,600 for the repair. This appears to be a known issue, as the dealer said "we don't know if this will turn into a recall." There seems to significantly similar issues all over the Pacifica message boards.

Hello: My 2018 Pacifica hybrid was just recalled, and serviced, yet the hybrid battery only last a few miles before needing to be recharged. Also, when in reverse the back up camera doesn’t always come on and doesn’t beep when approaching an obstacle. It will also stay on while driving forward.

My car wasn’t driving properly (2024) so I brought it to a Chrysler dealer in Mt Juliet TN. They did some cylinder work for $2300. The vehicle had approx. 85000 miles on it. The check engine light came on again at about 90000 miles (2025) so I brought it to Christian Brothers in Mt Juliet TN and they did spark plug work for $1700. The check engine light came on immediately after and the same auto mechanic said it was the head gasket. I brought it to Car Max in Nashville TN to sell it but they didn’t offer enough and said the error code indicated a cylinder misfire.

Major engine damage at 83,000 miles (blown head gasket). Vehicle was well maintained. It seems that this is common issues with the Chrysler Pacificas.

The contact owns a 2018 Chrysler Pacifica. The contact stated that while driving at an undisclosed speed, the back-over prevention camera image remained displayed on the radio display screen. The cause of the failure was not yet been determined. The local dealer was contacted and informed the contact that the VIN was not included in NHTSA Campaign Number: 19V886000 (BACK OVER PREVENTION, EQUIPMENT). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 80,000.

Leading up to the failure the smell of coolant was noticeable after driving the van. Coolant reservoir never showed a drastic decrease in coolant but I would top minimally every 6-8 months. I took the van to 3 different shops stating that I smelled coolant with zero evidence of a leak. System was tested and found not be leaking coolant at each shop and recommend continue to drive the vehicle. At 61,000 miles CEL came on with code P0305. Code was for a misfire in cylinder 5. CEL ended up going away only to come back a few days later. Engine never displayed any signs of overheating and consistently runs at a normal operating temp according to the onboard display. Inspection showed coolant pooling in cylinder 5 and wear on the camshaft. Oil changes completed every 3k miles and the recommendation from shop was to put in a new engine in a car 1K beyond the warranty. Reading numerous posts suggests that this is a continued issue that Chrysler doesn't want to take ownership for on their products.

Vehicle starting having some issues on startup. Check engine light came on and immediately took it in to the local shop to have it inspected. The HEAD GASKET had gone bad--while not fully blown it was leaking coolant into the cylinder and would have left us stranded on the side of the road with our three little kids if it completely failed when we were out and about.

Engine has 85000 miles on it and has never missed an oil change or service. Car has never overheated, but a check engine light has come on for a misfire in cylinder 6. Dealership indicates there is a blown head gasket and pitting on the engine. This car is too new to have such significant engine problems and it looks like it is a very common occurrence.

User bought 2018 Chrysler Pacifica PHEV in 2019. User had no issues with the vehicle, all recalls completed, until the completion of NHTSA Recall 22V-077 (Chrysler recall 73B). Recall 73B was completed on 13 Feb 2025 with approx. 103,000 miles on the vehicle. The recall included flashing the HV Battery Pack Control Module and a "soak" of the HV Battery to determine battery health; servicing dealer reported recall successful and battery health test found battery health was good. Approximately 1 week following the recall, the check engine light came on and stayed on for a couple of days and "self cleared". Several weeks later, the same sequence of events as above occurred once again. On 9 April, following a full charge overnight, I started the vehicle and the gas motor immediately started, check engine light illuminated, "turtle mode" icon appeared, and I was notified that "Vehicle Speed May Be Limited". After completing the short trip in "limp mode", I restarted the vehicle and only the check engine light was visible, van ran as normal. The following morning, no issues at all. Took the van to be diagnosed and was told an actuator in the dash needed replaced; actuator replaced. Five days later, once again, started the vehicle and the gas motor immediately started, check engine light illuminated, "turtle mode" icon appeared, and I was notified that "Vehicle Speed May Be Limited". Took the van to the dealership, at 106,163 miles, for diagnosis and have been told that the HV Batte

The contact owns a 2018 Chrysler Pacifica. The contact stated while reversing, the back-over prevention camera screen failed to function as intended. The back-over prevention screen displayed a black screen. The vehicle was taken to the dealer where it was diagnosed with computer and electrical system failure. The contact was informed that the back-over prevention assembly, instrument cluster, and electrical system needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The contact was informed of an unknown recall; however, the VIN was not associated with the recall. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 135,000.

I am writing to express my deep concern regarding a critical design flaw in my 2018 Chrysler Pacifica that resulted in a severe overheating incident on the highway. I have experienced a sudden and dangerous failure wherein my vehicle’s coolant drained rapidly, causing the engine to overheat within minutes of driving under normal conditions. Below, I address key questions related to the malfunction: Component/System Failure and Inspection Availability: The core issue appears to be a malfunction within the engine cooling system, directly linked to a problematic head gasket design. I have inspected the affected system and component by a qualified independent service center at your request. Safety Risk: Although my vehicle did not exhibit any warning lights or alerts prior to the incident, the rapid onset of overheating posed an immediate danger. This unexpected failure could have resulted in a catastrophic engine failure, thereby placing me, my passengers, and other road users at significant risk. Confirmation of the Issue: Despite strict adherence to routine maintenance, the problem has been confirmed by a independent service center. Their inspections indicate that this is not a result of neglect but likely a consequence of a fundamental design flaw which appears to be a common issue with this van and previous years with remediation. Third-Party Inspections: While the manufacturer has not yet conducted a formal inspection, independent service centers have reproducibly identifie

The vehicle randomly stalls, goes dead and becomes unresponsive. This has happened numerous times at lights, stop signs and in the middle of the road.

While driving the engine light came on. I have had the van 5 months at this time. I took it to the dealership where they diagnosed it with a crack in the block. I have extended warranty, BUT the service advisor told them that this is a common issue with these vehicles and they see it all the time. NOW, my warranty denied the claim to do "MANUFACTURER DEFECT". Of course they back peddled and told warranty that it was due to a piston or detonation, TOO LATE, warranty will not cover it. Chrysler sent out an engineer who stated it was not a manufacture defect and that my warranty should cover it. Which they won't because all they heard was "MANUFACTURE DEFECT". My van has less than 100,00 miles on it and now I have no van. I can't afford the 12K for the motor and the 21K I still owe one it. Come on CHRYSLER do better for us!

At startup there has been a noticeable misfire, and a rough start condition. Check engine light came on shortly after buying it (used) with a P0305 code and low coolant was observed - Cylinder 5 misfire. Sparks plugs were replaced and coil was swapped and there was an immediate difference in it running better and less of a noticeable misfire. few weeks later check engine light comes back on and noticed there was a drop again in coolant levels. Topped off coolant and re-checked everything and P0305 code returned. Code has been intermittent but just got it into a shop for further investigation and found a new head was needed where this is a common problem in shops and Chrysler is now recommending to have the head replaced as part of this fix due to problems on their end. Shop it's at won't take the risk of a head replacement, and we'll likely have to go through the dealer. There was previously a class action lawsuit that closed in 2022 to cover this issue. This needs to be a recall or further action needs to be taken before this leaves someone stranded in a dangerous situation - likely when the auto start stop can't restart a vehicle at an intersection due to rough start.

I left the parking lot and started driving home at about 8:45pm on 3/31 and heard a really loud pop. It sounded like glass and I inspected the windows and panoramic sunroof. The panoramic sunroof glass has shattered on the 2nd row section and has a hole in it. The glass is still making noises like it's continuing to crack.

Going around curves the vehicles steering seems to lock in the turn and then jerks out of the turns. The dealership says there's nothing wrong. . It's dangerous and scarey and this is a minivan the steering should not lock or get stuck going around curves off offramp anywhere between 30- 55 mph. It's scarey . The car turns out of the lane on several occasions at first that's how I thought the car operated and now I discovered I'm wrong as it is getting worse . I cant get the car dealership to fix it!

My transmission went out at 108,000 miles. 6 out of 9 gears went bad. Had it replaced and it went out again 2 weeks later. The transmission dropped while I was driving but luckily I was pulling into a parking spot. Had to have another transmission installed. This scared me because my kid was in the car and was on the expressway a couple of minutes before it dropped. Also, the oil filter housing was cracked and I know this is a common problem because it is made of plastic.

The contact owns a 2018 Chrysler Pacifica. The contact stated while driving 25 MPH, several unknown warning lights Illuminated. The message to “Pull over and turn off Vehicle” was displayed on the instrument panel. The contact pulled over to the right side of the road and the vehicle lost motive power and stalled. The contact was able to restart the vehicle after several minutes; however, the message remained displayed while driving to the residence. The dealer was contacted; however, the dealer informed the contact that the VIN was not under recall. The contact stated the failure reoccurred on several occasions. The vehicle was not taken to the dealer to be diagnosed. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The approximate failure mileage was 89,000.

The straps on my Nuna Rava come loose when pulled at the shoulder. I have contacted Nuna multiple times about this and they refuse to replace or refund my car seat. They told me to discontinue use as the seat is not safe, which I have done, but I had to purchase a new car seat from another company so that I would have a safe seat for my child.

The power steering stops working intermittently while driving. Today we were going about 40mph and the steering wheel locked up for about 2 minutes. We were driving straight forward . When we came to the stop light we turned the engine off and restarted the engine. We could have a major accident. It has been doing this for about 3 weeks. We are not going to drive it until it fixed.

At approximately 78,000 miles and just over 6 years old, my vehicle experienced a blown head gasket and potentially a warped engine head. The estimated repair cost for this issue is over $7,000. Chrysler really need to look at their quality issue, I will never buy a Chrysler product again.

The contact owns a 2018 Chrysler Pacifica. The contact stated that while driving on several occasions, after the vehicle was stopped, the accelerator pedal was depressed; however, the vehicle failed to respond as needed with an abnormal clunking sound while the transmission shifted from 1st to 2nd gear. The check engine warning light was illuminated. The contact stated that on one occasion while stopped at a red light, the transmission failed to shift into 2nd gear from the 1st gear. The vehicle was pushed over to the side of the road for approximately 20 minutes. The contact then pressed the PUSH to START button twice, held the accelerator pedal for 10 seconds, turned the vehicle off for two minutes, and then restarted the vehicle. The vehicle was taken to an Auto Parts store where a handheld diagnostic tool retrieved DTC: P0732. The contact stated that the code was cleared. The vehicle was taken to the same dealer however, the dealer was unable to duplicate the failure. The manufacturer was notified of the failure. The failure mileage was approximately 30,000.

The contact owns a 2018 Chrysler Pacifica. The contact stated while driving at an undisclosed speed, the vehicle stalled and lost motive power. The vehicle was restarted and driven to the residence. The contact stated that several unknown warning lights were illuminated. The vehicle was towed to the dealer where it was diagnosed with starter failure. The contact was informed that the starter needed to be replaced. The vehicle was not repaired. In addition, the contact stated that the failure was persistent and had been ongoing for several years. The contact stated that an unknown recall was performed previously, and the battery was replaced. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 70,000.

Power steering went out and can’t back on

Our vehicle is always kept in a garage and rarely parked outside for extended periods of time (not a vehicle used for transportation to and from work on a daily basis). We had our check engine light come on. This resulted in us using our second vehicle for several days before determining days later that the check engine light was still on. We took it in and they said the stored code was for a small evap leak and said it was likely due to cold temperatures and ice build up around the edge of the vent that blocked the flap from opening. As mentioned, this vehicle was in a garage for several days leading up to the check engine light appearing and for several days after the initial appearance. When I asked the dealership doing the repair what we could do to prevent this from happening again they suggested we avoid having the vehicle parked outside in the cold. This seems to be an issue that should be handled by Chrysler as opposed to me as the consumer and causing me to pay $217.31!

Extreme premature failure of head gaskets. only at 80K miles and this is a known issue with my year Chrysler Pacifica requiring a 3500 dollar repair. the car has never over heated prior to this failure.

Head gasket failure..engine replaced with factory long block by independent garage at owner expense

The contact owns a 2018 Chrysler Pacifica. The contact stated while driving 30-35 MPH, the vehicle made an abnormal beeping sound. The message "Stop Safely - Vehicle will shut off soon" was displayed, and the vehicle stalled. Several unknown warning lights were illuminated. The contact was able to pull over to the side of the road. The vehicle was able to restart, and the contact continued driving. The contact stated that the failure had previously occurred while her husband was driving at an undisclosed speed. The contact's husband was able to pull to the side of the road, and the vehicle was able to restart after an extended period. The vehicle was taken to the dealer, where it was diagnosed as a low voltage failure. The vehicle was not repaired. The contact related the failure to NHTSA Action Number: PE22008 (Power Train). The manufacturer was not notified of the failure. The failure mileage was approximately 73,692.

Had vehicle towed to Orange Coast Chrysler Jeep Dodge and Ram 11/4/24 due to vehicle being unable to start. Error message in vehicle indicated "Service Hybrid System"" and "Service Charging System" Vehicle was left at dealership pending inspection. 12/5/24 I contacted dealer asking for update and was told Chrysler STAR case was opened for vehicle for hybrid battery. No further information was provided. 1/5/25 I contacted dealer again for update. Was told Chrysler engineer had attempted diagnosis/ repair of vehicle including application of current recall 73B (NHTSA Recall ID 22V-077) but was unsuccessful. Was told another Chrysler engineer must be brought in to assess/ repair vehicle.

Our 2018 Pacifica after only 77K rough miles has a blown gasket and a misfire in cylinder 3. The safety concern is that my family bought this van and are the original owner with the safety standards in mind. We have a 6 year old and a 3 year old. we have had this van since our first born was born. a possible blown engine is a safety issue and wouldn't expect this with such low miles. Vehicle was inspected by the dealer and coolant was found in cylinder 3. the only indication that we had got was the check engine light coming on and then after we made sure the gas cap was on, we ran some fuel cleaner to see if it was a fuel injector issue and the light went away. when my wife used the key fab to start the vehicle, it wouldn't start and the engine light appeared. we took it to the dealer at that point once we had autozone scan the codes. we then learned it could be a gasket or needing plugs and wires replaced. Dealer reviewed and used a camera to see that there was coolant leak. this issue continues to impact many of these vehicles and nothing is being done.

Blown head gasket and leaking coolant at 65,000 miles with regular maintenance. $6000 repair quotes.

Cylinder 3 keeps failing and head gasket keeps failing. Have had to replace the head gasket 3 times now over the last 6 months. This last time it lasted 6 weeks. Code was P105D.

The car shifts really hard going into 2nd gear, it feels like I've been rear-ended. It is awful. Also sometimes it loses power then accelerates on its own. Both issues are safety issues. this happens several times a weeks for the last 3 years.

While driving on the freeway, the van suddenly started to ‘drag’ and alarm that the start/stop system was unavailable. I was barely able to pull off the freeway before the van completely stopped moving and would not start up again.

In the dash bord power steering not aveleble warning also stop start not responding then servic charging....... not safe to drive this car at all. I had to go the dealership more than four times a year recently spending a lots of time and money. Again engen lights come up.

The head gasket appears to be leaky. Misfire in cylinder 3. routine fluid maintenance and never over heated. Appears to be a common issue with this engine.

Our 2018 Chrysler Pacifica had a check engine light come on and we immediately took it to get it checked out. The mechanic said that it had a cylinder 5 misfire that would require a new engine. Our Pacifica only has 68,000 miles on it. The vehicle never over heated and we did routine maintenance by the manufacture recommendations. Our extended warranty is denying the claim due to coolant leaking into the cylinder. We have never had any issues or overheating. This looks like a faulty design. We have been told this is a very common thing in Pacifica's from the years 2017-2021. I would like someone to please investigate the engine issues in the Chrysler Pacifica.

Water pump is leaking with white smoke came out from the engine bay under hood. I immediately checked the reservoir and it was empty. I took pictures and consulted with my friend who is a mechanics who confirmed the findings being due to water pump leak. I confirmed with a pressure test. Had I not noticed, it would’ve listed to other serious problems.

Significant leak from the oil filter housing underneath the intake manifold plenum. Upon inspection, one ore more seals of the housing appear to have failed.

PCV valve failure. There was oil leak outside. When taken off, there was oily gunk inside. When shaked, it was obviously completely stuck. I took out and cleaned it thoroughly.

VVL solenoid gasket and O-rings failure in bank 1 and bank 2. This led to significant amount of oil seeping over time on other engine bay components.

Persistent white smoke from the exhaust suspecting coolant leak concerning for blown head gaskets.

Vehicle engine is stalling, smells like burnt makes a lot of knocking sound and has a lot of white smoke coming out the muffler. My safety of my family and me is put at risk because this is a safety hazard that can cause an accident or a fire.

The engine was unresponsive and made it difficult to pull into the oncoming traffic. We found out the head gasket was blown and it finally just shut down. Then after we fixed that the lifters and heads were gone even after we had the heads milled and got new gaskets and other parts amounting to $11000.00 so far. We have this car for two years and we have put less that 5000 miles on the car.