1994 Chevrolet S10 Pickup

Defect. CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.

Risk. THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.

Remedy. HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).

WAS DRIVING MY TRUCK DOWN MY DRIVEWAY WHEN I FELT THE BRAKE PEDAL DROP TO THE FLOOR. I QUICKLY PUMPED THE PEDAL BUT IT KEPT GOING TO THE FLOOR BOARD. I STOPPED BARELY AND SAW FLUID DRIPPING FROM UNDER NEATH THE TRUCK. HAD A MECHANIC CHECK IT AND FOUND THE BRAKE LINES ARE ALL RUSTED OUT AND JUST BLEW APART WITH NO WARNING! VERY DANGEROUS! *TR

1994 CHEVROLET S10 WINDSHIELD WIPER MOTOR FAILS REFERENCE NHTSA RECALL NO. 03V159/GM RECALL NO. 03023 THE WINDSHIELD WIPER MOTOR, PC BOARD ON MY 1994 CHEVROLET S10 IS DEFECTIVE AND CAUSES VERY DANGEROUS SITUATIONS WHEN RAINING. WIPERS STALL OR STOP. THIS SAME SITUATION THAT IS HAPPENING TO MY CHEVROLET S10 HAPPENS TO THE VEHICLES IN THE RECALL NOTICE GM03023. GM LEFT THE YEAR 1994 OFF THIS RECALL AND I WANT GM TO ADD ALL S/N OF THE YEAR 1994 CHEVROLET S10 FIX TO THE WIPER MOTOR RECALL OR ISSUE A ADD ON RECALL. THIS IS A VERY SERIOUS SAFETY ISSUE. *NM

PURCHASED USED 1994 CHEVY S10 TRUCK WITH 102,000 MILES ON 4/10/06. BRAKES FAILED (WOULD MAKE NOISE LIKE ABS AND WOULDN'T STOP -- THEN WOULD WORK AGAIN-- VERY SPORADIC) AND IT WAS DETERMINED BY A LOCAL MECHANIC THAT IT WAS THE ABS SYSTEM. THE MECHANIC CALLED A GM TECHNICIAN WHO FAXED DOCUMENT #724859 ON A RECALL COVERING HIGH/LOW/HIGH ABS BRAKE ANOMALY #99046B - 5/16/2000 AND I WAS TOLD TO CONTACT THE FACTORY DIRECT ON THE SAFETY ISSUE TO HAVE RESOLVED. THE DOCUMENT STATED HOW TO DETERMINE WHETHER THE ABS WAS ORIGINAL TO THE CAR OR HAD BEEN REPLACED IN THE RECALL. IT WAS DETERMINED BY LOCAL MECHANIC TO BE THE ORIGINAL. I CALLED THE FACTORY AND GAVE THEM ALL THE ABOVE INFORMATION AND WAS IMMEDIATELY TOLD THE RECALL ENDED 12/1/2002 AND I COULD NOT BE HELPED. AFTER ASKING TO HAVE THIS RECONSIDERED BECAUSE OF THE SAFETY ISSUE INVOLVED I WAS TOLD THEY WOULD, AND THEN A DAY OR SO LATER WAS TOLD I WOULD NEED TO TAKE THE TRUCK TO A LOCAL CHEVY DEALER TO HAVE THE PROBLEM CONFIRMED AND THE ABS SYSTEM CHECKED TO SEE IF IT HAD ALREADY BEEN REPLACED IN THE RECALL. I DID THAT AND THE LOCAL DEALER SENT THE INFORMATION TO THE FACTORY STATING THE ABS PROBLEM WAS THAT OF THE RECALL AND THE ABS SYSTEM WAS ORIGINAL AND HAD NOT BEEN REPLACED. AT THIS TIME GM TOLD ME I WOULD HAVE TO PAY FOR THE REPAIR UP FRONT, WHICH I DID, WITH THE LOCAL DEALER AND SEND CERTAIN PAPERWORK FOR REIMBURSEMENT WHICH WOULD TAKE 60 DAYS. AFTER SEVERAL WEEKS AFTER THE PAPERWORK HAD BEEN SUBMITTED I WAS INFORMED BY PHONE T