2024 BMW 530i

Defect. BMW of North America, LLC (BMW) is recalling certain 2025 Mini Cooper S, Mini Countryman S All4, X2, 2024 Rolls-Royce Spectre, 2023-2025 i7, 7 Series, X7, 2024-2025 i5, 5 Series, 2023-2024 XM, X1, 2024-2025 X6, and X5 vehicles. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.

Risk. A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, malfunctioning ABS and/or DSC systems can cause a loss of vehicle control. Either of these scenarios can increase the risk of a crash.

Remedy. The Integrated brake system will be inspected and, if necessary, replaced, free of charge. Owner notification letters are expected to be mailed August 21, 2026. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce customer service at 1-877-877-3735. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning August 21, 2026. Vehicles previously repaired under recall 24V739 or 24V104 will need to have the new remedy completed.

Defect. BMW of North America, LLC (BMW) is recalling certain 2021-2023 Toyota Supra, 2022-2023 2 Series Coupe, 2021-2024 5 Series (xDrive), 2021-2022 Z4, 2022-2024 4 Series (Gran Coupe), 2021-2024 4 Series (Convertible and xDrive Convertible), 2021-2023 4 Series (Coupe), 2021-2024 3 Series, 2021-2023 X4, 2021-2024 X3 vehicles. Please see the recall report for a complete list of all models. The engine starter may overheat and catch fire due to wear on an internal component.

Risk. Fire increases the risk of injury.

Remedy. Dealers will replace the engine starter, free of charge. Owner notification letters were mailed July 21, 2026. Owners may contact BMW customer service at 1-800-525-7417 or Toyota's customer service at 1-800-331-4331. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning March 24, 2026.

Defect. BMW of North America, LLC. (BMW) is recalling certain 2023-2024 X1, X5, X6, X7, XM, 530i, i5, 740i, 760i, i7, and 750e vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.

Risk. A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, malfunctioning ABS and/or DSC systems can cause a loss of vehicle control. Either of these scenarios can increase the risk of a crash.

Remedy. Dealers will replace the integrated brake module, free of charge. Interim owner notification letters notifying owners of the safety risk are expected to be mailed November 22, 2024. Second letters will be mailed once the parts are available. Owners may contact BMW customer service at 1-800-525-7417. Vehicles in this recall were previously repaired under recall number 24V-104 and will need to have the new remedy completed.

Defect. BMW of North America (BMW) is recalling certain 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4, and 2025 MINI Hardtop 2 Door (Cooper, Cooper S) vehicles. Please refer to the recall report for the complete list of models. The welds in the servomotor of the integrated brake control module may break, causing a loss of power brake assist and rear brake function. In addition, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function.

Risk. A loss of brake power assist or rear brake function can result in extended stopping distance. A loss of ABS or DSC can cause a loss of vehicle handling and control. Either of these scenarios can increase the risk of a crash.

Remedy. Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed November 13, 2024. Owners can contact BMW Customer Service at 1-800-525-7417.

Defect. BMW of North America, LLC. (BMW) is recalling certain 2023-2025 BMW, MINI, and Rolls-Royce vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.

Risk. A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, malfunctioning ABS and/or DSC systems can cause a loss of vehicle control. Either of these scenarios can increase the risk of a crash.

Remedy. Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed between June and December 2024. Owners may contact BMW customer service at 1-800-525-7417 or Rolls Royce customer service at 1-877-877-3735.

Defect. BMW of North America, LLC (BMW) is recalling certain 2023-2024 740i, 740i xDrive, 760i xDrive, i7 eDrive50, i7 xDrive60, i7 M70, 2024 750e xDrive, 530i, 530i xDrive, i5 eDrive40, and i5 M60 vehicles. The ground connection to the steering wheel may not have been attached correctly, resulting in an inoperative hands-on detection system.

Risk. An inoperative hands-on detection system may fail to detect when the driver's hands are not on the steering wheel and therefore not engage the emergency stopping assistant system, increasing the risk of a crash.

Remedy. Dealers will inspect and reattach the ground connection as necessary, free of charge. Owner notification letters were mailed December 8, 2023. Owners may contact BMW customer service at 1-800-525-7417.

Concern: The 2024 BMW 530i is equipped with "Dynamic Cruise Control" and a "Speed Limit Assistant." The system is designed to automatically adopt posted speed limits and adjust the cruise control set speed. However, because this specific trim lacks a radar-based distance-monitoring sensor (Active Cruise Control), the vehicle initiates aggressive, unintended acceleration toward slower-moving traffic or stopped obstacles whenever it detects a higher speed limit sign. Safety Risk: While the vehicle is using its cameras to "see" and adopt an external speed command, it remains "blind" to the actual traffic directly in its path. This creates a high risk of rear-end collisions, as the car will prioritize reaching the new speed limit even if it means accelerating directly into the bumper of a lead vehicle. Proposed Solution: A "Dynamic" cruise control system that has the authority to control acceleration based on external data MUST also have the authority to maintain a safe following distance. I propose that BMW should be required to include distance-monitoring features in all cruise control systems that utilize automated speed adoption. If the hardware for distance-keeping is not present, the car should not be permitted to automatically increase speed based on roadside signs. Inspection Status: The vehicle is available for inspection. No warning lamps appeared prior to these incidents, as the system is operating exactly as programmed by the manufacturer, which highlights a fundament

I had stopped uphill, with my foot on the brake, heading East on the left lane of Pomona Road, at the approach to the Traffic Light Junction with Route 45, around 3.50 PM on Friday 1/23/2026. There were about 5-6 cars also stopped, ahead of me, at the Red Traffic Light and several cars behind me, when I heard my car engine rev up loudly. I kept applying the brake. I could hear my car tires spinning with a smell of burning rubber from the tires as they spun on the road, as my car lurched forward, and hit the rear of the stopped car ~ 5-7 feet ahead of me. I felt that I had no control of my car and turned the engine off after the collision. I called 911 twice at 3.55 PM and 4.12 PM and waited as advised, for the Police Officer who arrived about 30 mins later. I filed the report and the officer was able to retrieve my auto license plate which had fallen off from the road where I could clearly see the tire marks on the asphalt from the spinning tires at the time of the accident. The only message I recall receiving on the display was one that informed me that I had experienced a crash after the collision. I had never experienced this problem before. Later ,after the Police Officer had arrived and documented the accident, I was able to drive the car home. The burning smell from the tires persisted for some time. The next day I called the BMW dealer in the AM, and with great trepidation, drove the car to the BMW dealership. I explained to the Service Advisor on duty on the Saturday,

The center console screen has a default screen that in part includes interior fan speed temperature. To adjust the fan speed and other A/C settings, the driver has to click press a small button at the bottom of the screen to open a new window. This is very dangerous because it requires the driver to take their eyes off the road. The car should have physical buttons for the fan speed. Since it doesn't have physical buttons for the fan speed, the car should have permanent fan speed buttons at the bottom of the screen at all times. The bottom of the screen should include permanent buttons for air temperature, A/C on/off, and fan speed. BMW can easily do this with a software update. The car does include the ability to make these changes through voice commands, but the voice commands do not always work.

Booked the appointment with BMW of Portland for November, 10,2025 For 9 o'clock AM. Arrived at dealership, checked in and left vehicle. I was called about 45 minutes later and informed that they would not be able to preform the recall repair on my car due to parts that were needed and associated with the recall , asked me to pay for it which I refused since it is part of the recall repair. I have never come across a vehicle recall where parts were not covered with the recall. I find this very strange, please investigate.

The contact owns a 2024 BMW 530I. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

Brakes did not work properly, brakes were hard and vehicle was not stopping, the vehicle was difficult to control because steering wheel was very hard too. This incident caused the vehicle to take a significant distance to stop and almost cause a crash with the vehicle in front. The incident was reported to dealer, dealer representative said there was a recall on the IBS and requested vehicle to be taken to dealership to replace defective part of the IBS. This recall was never notified to us (customers) by the manufacturer nor by the dealer. No warning messages or symptoms were presented before the brakes failure. Defective part was replaced by dealer at not cost to the us (customers).

The dealer I bought the car from, BMW of Nashville (Brentwood) said they don't have parts to replace the faulty integrated brake module and refused to put me on a list to contact me when the parts come in.

The contact owns a 2024 BMW 530I. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2024 BMW 530I. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2024 BMW 530I. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2024 BMW 530I. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact called two other local dealers, BMW of Fort Lauderdale (1441 S Federal Hwy., Fort Lauderdale, FL 33316) and BMW of Pembroke Pines (14800 Sheridan St., Pembroke Pines, FL 33331) and was informed that parts were not yet available. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2024 BMW 530i. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control ESC, Service Brakes, Hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact was driving at approximately 10 MPH and slowing to park her vehicle. The contact stated that she had depressed the brake pedal, however the vehicle was not stopping. The contact continued forward and she swerved to avoid crashing into a wall and stopped the vehicle on top of bushes. The vehicle was not damaged. The contact had the vehicle towed to a dealer who diagnosed the vehicle and determined that the brake system was operating correctly. The vehicle was not repaired. The contact stated that the loss of braking power had occurred prior to her receiving the recall notice. The contact stated that she called the dealer and was advised that parts were not available. The failure mileage was approximately 3,600. VIN tool confirms parts not available.

I am a [XXX] physician who has been driving for about 30 years. Purchased this vehicle as a CPO with VIN as identified above. It is a 2024 BMW 530i X-drive from Faulkner BMW in Lancaster, PA. It was delivered on July 25, 2024. I have only put approximately 200 miles on in it since delivery. On Thursday, [XXX] there was catastrophic failure of the vehicle. At around [XXX] I was driving North on [XXX] about to make a right turn onto [XXX] for work at the Hospital System where I am employed. The traffic light was red and I was going about 5 miles an hour and attempted to brake the car. There was an 18 wheeler truck about 10 to 15 feet ahead of me. My car instead of braking underwent unintended acceleration. Despite my efforts to slam on the brake, the car was accelerating. None of the safety features including automatic emergency breaking were activated. Unfortunately I collided with the 18 wheeler. This was fortunate in some regards as I could have potentially struck a pedestrian or a motorcycle and have had a potentially fatal event. Please note that additionally my airbag did not deploy. The BMW dealership was contacted. They dropped off a loaner vehicle and picked up my vehicle in a flat bed for investigation. I was informed to contact BMW of North America which I did. Interestingly enough, there were no safety recalls on this vehicle on [XXX]. The car is at the BMW dealership in Lancaster PA for their internal inspection. I am being informed that the engineers are looking a