2006 Dodge Ram 2500

Defect. Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.

Risk. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy. Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.

Defect. Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.

Risk. In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy. Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the affected Chrysler and Dodge owners and Mitsubishi will notify the affected Raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for Chrylser on June 8, 2015. The recall for Mitsubishi started on June 24, 2015. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Mitsubishi owners may call 1-888-648-7820. Chrysler's number for this recall is R25. Note: This recall supersedes recall 14V817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.

Defect. Chrysler Group LLC (Chrysler) is recalling certain model year 2006-2007 Dodge Ram 1500, 2500, 3500, Dakota, and 2006 Mitsubishi Raider vehicles manufactured July 1, 2005, to July 31, 2006 with manual transmissions. The return springs in the clutch ignition interlock switch may break.

Risk. Broken springs can result in a no-start condition, or cause unintended movement when the ignition is cranked, increasing the risk of a vehicle crash.

Remedy. Chrysler will notify owners, and dealers will replace the clutch ignition interlock switch, free of charge. The recall began on March 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P80.

Defect. Chrysler Group LLC (Chrysler) is recalling certain model year 2003-2008 Dodge RAM 2500 4x4 and 3500 4x4, model year 2007-2008 Dodge RAM 3500 4x2 Cab Chassis and model year 2006-2008 Dodge RAM 1500 Mega Cab 4x4 trucks manufactured February 12, 2002, through February 13, 2008. The left tie rod assembly may break.

Risk. A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.

Remedy. Chrysler notified owners and launched its recall campaign in January 2014. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N62.

Defect. CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008, BECAUSE THE LEFT TIE ROD BALL STUD MAY FRACTURE. THIS CONDITION TENDS TO OCCUR DURING LOW SPEED PARKING LOT TYPE MANEUVERS WHEN THE CUSTOMER IS MAKING A TIGHT TURN. ADDITIONALLY, MODEL YEAR 2003-2008 DODGE RAM 2500/3500 VEHICLES MAY HAVE RECEIVED THE AFFECTED TIE ROD ASSEMBLY AS A REPLACEMENT PART DURING NORMAL SERVICE.

Risk. THIS CONDITION COULD RESULT IN THE POTENTIAL LOSS OF DIRECTIONAL STABILITY IN THE LEFT HAND FRONT WHEEL, INCREASING THE RISK OF A CRASH.

Remedy. DEALERS WILL INSPECT THE TIE ROD ENDS FOR RELATIVE ORIENTATION AND REPLACE THE LEFT OUTER TIE ROD AS REQUIRED AND PERFORM A FRONT END TOE ALIGNMENT AS NEEDED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 3, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

Defect. FABTECH IS RECALLING CERTAIN AFTERMARKET REPLACEMENT PITMAN ARMS, P/NOS. FTS93001 AND FT44039, INSTALLED FOR USE ON CERTAIN 2003 THROUGH 2008 DODGE 2500 4WD, 3500 4WD, AND 1500 4WD MEGA CAB VEHICLES. THE PITMAN ARM CAN FRACTURE AND BREAK AWAY FROM THE STEERING BOX CAUSING TOTAL LOSS OF STEERING CONTROL.

Risk. STEERING LOSS COULD RESULT IN A VEHICLE CRASH POSSIBLY RESULTING IN PROPERTY DAMAGE, INJURY OR DEATH.

Remedy. FABTECH WILL NOTIFY OWNERS AND AUTHORIZED INSTALLERS WILL INSPECT FOR DEFECTIVE PITMAN ARM AND REPLACE IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 24, 2010. OWNERS MAY CONTACT FABTECH AT 1-877-432-2832.

Defect. CERTAIN CURVED TEMPERED REPLACEMENT GLASS MANUFACTURED BY HANGZHOU SAFETY GLASS LTD AND SUPPLIED TO SAFELITE BY AUTO TEMP INC., IDENTIFIED AS DOT-430, AND SOLD FOR USE ON CERTAIN DOMESTIC AND FOREIGN VEHICLES MAY NOT BREAK INTO SMALL PIECES AS EXPECTED OF TEMPERED GLASS AND FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, "GLAZING MATERIALS."

Risk. IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT(S) MAY BE SERIOUSLY INJURED BY SHATTERED GLASS.

Remedy. SAFELITE WILL NOTIFY ITS RETAIL CUSTOMERS AND REPLACE THE GLASS FREE OF CHARGE. RETAIL CUSTOMERS CAN CONTACT SAFELITE TOLL FREE AT 1-888-843-2906. SAFELITE WILL NOTIFY ITS WHOLESALE CUSTOMERS AND REIMBURSE WHOLESALE CUSTOMERS FOR CURRENT INVENTORY AND AT A SPECIFIED RATE FOR REPLACING THEIR CUSTOMER'S GLASS. WHOLESALE CUSTOMERS CAN CONTACT SAFELITE'S WHOLESALE DIVISION, SERVICE AUTOGLASS TOLL FREE AT 1-888-246-6298. THE RECALL BEGAN ON JANUARY 15, 2008.

Defect. CERTAIN LKI ENTERPRISES, INC., BRAND NAME SUPERLIFT SUSPENSION, PITMAN ARMS SOLD AS REPLACEMENT EQUIPMENT FOR 2003-2007 DODGE RAM 2500 AND 3500 4X4 LIGHT TRUCKS. DUE TO INADEQUATE HEAT TREATMENT DURING PRODUCTION, THE AFFECTED PITMAN ARMS MAY DEVELOP CRACKS IN THE UPPER SPLINED ATTACHMENT ATTACHMENT TO THE STEERING OUTPUT SHAFT. MOVEMENT BETWEEN THE PITMAN ARM AND THE OUTPUT SHAFT MAY DEFORM SPLINES, RESULTING IN PREMATURE WEAR AND FATIGUE FAILURE OF THE AFFECTED PITMAN ARM.

Risk. PITMAN ARM WEAR OR FAILURE MAY LEAD TO LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.

Remedy. LKI WILL NOTIFY OWNERS AND REPLACE THE PITMAN ARM, IF NECESSARY. THE RECALL BEGAN ON MARCH 12, 2007. OWNERS MAY CONTACT LKI AT 1-800-551-4955.

Defect. ON CERTAIN PICKUP TRUCKS EQUIPPED WITH FOUR-WHEEL ANTILOCK BRAKE SYSTEMS (ABS), THE ABS ELECTRONIC CONTROL UNIT (ECU) MAY CAUSE A LOSS OF FRONT TO REAR BRAKE BALANCE, AND THE REAR BRAKES COULD LOCK UP PREMATURELY DURING CERTAIN BRAKING CONDITIONS.

Risk. THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.

Remedy. DEALERS WILL REPLACE THE ABS ECU. THE RECALL IS EXPECTED TO BEGIN DURING THE WEEK OF JULY 17, 2006. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at …

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field …

RMD opened this audit query (AQ) investigation in order to better understand and evaluate Chrysler's process(es) for timely and efficient execution of its safety recall campaigns, including its oversight and management of its parts division Mopar.Prior to opening this investigation, RMD had raised concerns with the company related to its execution of two safety recalls, 13V-528 and 13V-529, both of which involved safety defects that could cause the involved vehicles, FCA?s heavier Dodge Ram trucks, to lose steering control suddenly and without warning.Specifically, RMD inquired about the …

The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field …

On December 16, 2104, Chrysler Group LLC submitted a Safety Recall Report to NHTSA describing a defect in the clutch ignition interlock switches in approximately 66,819 model year (MY) 2006 through early-2007 Dodge Ram Trucks, Dodge Dakota, and Mitsubishi Raider vehicles equipped with manual transmissions and built between July 1, 2005 and July 31, 2006 (NHTSA Recall No. 14V-795, Chrysler Recall No. P80), including 38,969 MY 2006 Dodge Ram 2500 and 3500 vehicles that are part of the subject vehicle population for PE14-013.Chrysler's Safety Report states that:1) the clutch ignition interlock …

DODGE: BULLETIN PROVIDING ALIGNMENT PROCEDURES FOR TIE ROD BALL STUD HOUSING FOR THE RIGHT AND LEFT. MODEL YRS FOR CAB CHASSIS (REG AND MEGA PICKUPS AND 4X4) 2003-2011. *PE

The contact owns a 2006 Dodge Ram 2500. The contact stated that while her daughter was driving and accelerating to 40 MPH to merge into traffic, the vehicle hydroplaned on standing water, and the driver lost control of the vehicle, and the vehicle struck a cement barrier. The contact stated that the vehicle crashed into the barrier at a 30-degree angle, causing damage to the front of the vehicle. None of the air bags in the vehicle deployed. The contact stated that the daughter understood that based on the impact, the air bags should have deployed. A Police report was filed. The vehicle was towed to an impound lot. The contact stated that the vehicle was previously repaired under an unknown recall associated with the air bags. The contact's daughter sustained injuries and was having headaches, vision issues, and memory loss associated with the crash. A doctor’s visit and an MRI scan were pending. The failure mileage was approximately 128,000.

The contact owns a 2006 Dodge Ram 2500. The contact received notifications of NHTSA Campaign Numbers: 16V352000 (Air Bags) and 15V313000 (Air Bags. The vehicle was taken to the dealer. The contact was informed that parts were ordered and would be available on August 13, 2026. The contact stated that parts were still unavailable. The contact had not yet received an update on parts availability. The manufacturer was made aware of the issue. The contact was informed that the parts were available. The contact had not experienced a failure.

I took my vehicle into the dealership. Almost three weeks ago for a recall on the front end, a steering component. However, they told us that the parts were back ordered several days after the vehicle had been there for three weeks. And then all of a sudden, they call and a week and a 1 after that. And send a vehicle is done. I picked up the vehicle yesterday and it is not fixed. The problem still exists. We just about crashed on the freeway coming home when it started to do the death wobble shake that dodge ram is known for we nearly wrecked the truck on the freeway. It is not safe to drive. And the problem is not fixed. We have had nothing but problems with this dealership. In the past, and I believe they said they performed the recall safety issue. However, the truck was never fixed. We have pictures and proof

Odometer Fraud. The contact purchased a 2006 Dodge Ram 2500. It was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 133,000. The contact discovered that the mileage was 209,000 from an independent mechanic. The contact reported the issue to the local authorities.

Our first issue with the LT 265/70R17 was in 2020. We had a defective front driver ( tread came completely off the tire) of a Dodge Ram 2500. Replaced it and bought another new one, both new in front now @Sam’s Club. Drove to CA. On the way home, back left tire (drivers side) EXPLODED !! on hwy.10. Lost control of the truck and went off into the center divider, the truck rolled over and was completely destroyed. My wife had a concussion and had to have shoulder surgery due to the roll over. She almost lost her life and I got a hernia from impact. Our dog ( STD. Poodle)was catapulted from backseat about 20ft. Everyone lived. We did all the right things. Tires were inflated correctly, drove speed limit, temp. 75, 9:00am. No traffic. DPS deemed it NO FAULT because the tread that had come off the tire had 10/32nds and was fine. What went wrong????

Abs engages the truck rolls forward 10 to 20 ft. Before it stops. There was a recall that was done on the truck but the issue still continues. Nobody will help me. It's still a problem?

Truck does not want to stay in the road. It hops to the right with the steering not being turned. Cannot tell when it is going to do it.

Tire size was not correct. Actual was lt265/70r17 Rating 121/118S Just had two tires installed on the rear of the said truck. While pulling 5 ton bumper pull trailer, the amount of sidewall flex on these tires made it dangerous to drive. The amount of reverse track, which I don't know how to explain other than when you turn left the back of the vehicle will actually swing out (in the case of a left steering input, the back of the vehicle will go right, racing drivers also call this being lose). When other vehicles especially larger vehicles like semis past my vehicle or even the trailer behind it, it would push the back end of my vehicle and induce a turn... Talk about white knuckle driving .. I only drove about 200 mi to get home after having the cooper tires installed, I'm having them removed immediately as they are extremely dangerous to drive with. When I talked to Cooper they mention these tires were specifically made for Walmart, they are quite cheap. Also, the only reason I bought them is because I was on the side of the road with another tire that had separated tread but it was due to age and needed to get home. Walmart was the only tire place that could install tires. The previous michelins I had on there were great and did not have this issue(only the rear tires were replaced) I am working with Cooper and their satisfaction guaranteed promise, where they will switch them out with different tires and I just pay the difference, but I do not believe these tires should

Steering linkage and tie rod issues. Steering not working properly. I see that my vehicle is not listed in the recalls. Although. I am having steering issues. Constant tail light replacing.

Headlights- the passenger side headlight would come on then go off whenever it wants to and now the low beam does not work. I have tested the connection and replaced the bulb several times and still does not work. When driving at night it makes it difficult to see. And is also against the law to not having working headlights. Trailer lights- the drivers side brake light/blinker on any trailer that’s hooked to my truck does not work. I have taken it the a local shop (street dynamics which is out of business now) several times over the last 5 years to see if they can fix the issue. The fix was to put a jumper wire from the truck brake light to the trailer connector. I still do not have a blinker on the driver side of the trailer. Windshield wipers- the windshield wipers will come on and off whenever they want. Some times when it is raining they will turn on with the switch then will turn off while driving or will stay on after the switch is turned off. The switch has been replaced and did not change anything. It is dangerous to drive the truck during inclement weather. I am a Police officer and have been for 17 years. In the last 12 plus years I have owned the truck which is a 2006 Dodge 2500 I have been told by several dodge technicians and mechanics that the issues I’m having is being caused by the TIPM. While researching the tipm I have found out all of my trucks issues are similar to a lot of other people’s 2006 dodge 2500s. I have had issues with the trailer brake lights s

The pickup has had issue with being very difficult to come out of park. Upon searching internet is seems this is very common and expensive to fix being one of two (or both) things. The shift cable linkage and bushings premature wear, or the valve body release allowing the shifter to be removed from park. Either way concern is this will fail causing inability to shift safely into park and prevent an accident. Extremely unsafe. I have been advised this was already corrected by qualified dealer, but no change. Vehicle has just under 93,000 miles on it and only highway

This happened on my 2006 Dodge 2500 truck. I have had this truck since brand new and have maintained vigorously. Fortunately I was only going 25mph on the back road from my house. If this had happened on the highway I may not be here to tell this story. I felt like I had a flat tire so i stopped and didn't see anything so I started again and drove about a foot and then heard this loud crunching sound. I got out to find the center of my wheel had separated for the inside of the wheel. When I bought the truck I got the premium wheel package. The chrome covers are made on the wheel. I think what happened is because the chrome covers are made on the wheel there is no way to see that the wheel is rusting from the inside out and the owner has no idea they are driving a time bomb waiting to happen. My truck is almost rust free. I always took care to wash the salt off it in the winter 3 or 4 times a week. The truck has spent the last 10 years in Florida. I have never in my life ever seen this happen. I have no idea where the hub cap or the chrome cover went.

The contact owns a 2006 Dodge Ram 2500. The contact stated that while driving at an undisclosed speed, the vehicle started wobbling, and the contact lost control of the vehicle and almost crashed. The contact stated the failure had been persisted for a while. There were no warning lights illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 200,000.

This is a safety concern I have faced on multiple occasions with this pickup. I have owned it since new and kept up on maintenance and recalls. Today it happened again. What it is, the windshield wipers will erratically wipe, sometimes not wipe, not shut off, as well as come on at random. I reside in the wet side of the state of Oregon where it can be super dangerous to loose wipers in a torrential downpour of rain or snow. This pickup get use predominately for pulling trailers, which yet again adds another layer of danger when I lose much visibility of the road ahead of me. The first time this got really bad I took it to the dealer out of warranty and they diagnosed for three hours to tell me it was 90% probable that it was the Total Ingratiated Power Control Module. I said yes I will pay the total combined $1,400 to hopefully fix the problem. At times after this it has had occasional issues. Today, [XXX], it was acting about like it did the years ago that the dealer extracted, what I felt to be good money, to fix windshield wipers. I suspect in the round of diagnosis they may have messed with the wiper motor and made things marginally better for the years that I have since got out of it. On the dealer fix I researched the problem and it seemed to be kinda common in 2006 Dodge Rams at the time. Today I was doing more research to go about fixing this problem myself since the dealer fix has always been unsatisfactory to me. In this research I found two recalls for 2008-2009 Do

The contact owns a 2006 Dodge Ram 2500. The contact stated that the transfer case was making abnormal shifting sounds while the vehicle was parked. The contact stated that the transfer case was replaced; however, the failure persisted. Additionally, the contact stated that the vehicle was parked while he was working in the garage. The contact stated that he heard a clicking sound coming from the engine, and the vehicle started rolling backwards towards the street. The contact stated that he immediately entered the vehicle and engaged the electronic parking brake, and the vehicle stopped. The contact also stated that the vehicle hesitated to shift into the proper gear while driving. The dealer was notified of the failure and informed the contact that the VIN was not included in TSB Number: 18-091-22. The vehicle was taken to an independent mechanic, where the computer was flashed; however, the failure persisted. The vehicle was not repaired. The manufacturer was notified of the failure and contacted the dealer; however, no assistance was provided. The failure mileage was approximately 223,800.

Good Morning! On April 9, 2023 I was going to pickup my Son in his 2006 Dodge Ram 2500 at LAX. He was returning from a 3 week trip to Chile. After taking the transmission out of gear I attempted to start the truck, but the battery was dead. I got out of the cab and released what I thought was the hood release but released the emergency brake instead. The front wheel was turned at about a 40 deg. angle to the right in my driveway which is on about a 15 deg slope to the street. The truck rolled back pinning my left leg under the left front tire, while the open drivers side door pushed me towards the now moving wheel. the left front wheel continued to roll over my left hand and my right chest grazing my left side of my head. The truck continued to roll down the street and into a neighbors truck. I suffered 13 broken ribs, a collapsed right lung, a partially collapsed left lung, a broken shoulder, and a broken left eye socket bone, deep vein thrombosis in both lower legs, 2 weeks in the ICU, 1 week in the hospital and 1 week in rehab. I am presently in home rehab. The man across the street from me at one time worked as a service manager / mechanic for a local automotive shop, and told me that he has made the same mistake many times of mistaken the emergency brake release for the hood release. I would recommend relocating the brake release to the right of the steering wheel on all vehicles that have a foot actuated emergency brake.

November 2022-While trying to use my windshield wipers to clean my front windshield I noticed I could not turn them off plus they would move super fast then very slow. Over the next few months my windshield wipers would sometimes work normal but now they are consistently running sporadically: running fast, slowing down starting and stopping on their own. This is a very dangerous situation during a rain storm and I am going to take my truck into the dealer for repair but for safety reasons, this needs to get looked into for recall.

We were driving down the highway and it started doing the death wobble.

During a recent snowstorm, the windshield wipers started acting erratically. The wiper delay function no longer works. The wipers operate at one speed, when they work, and do not turn off when I turn the switch off. They seem to time out after awhile and stop wherever they happen to be on the windshield, not the lower parked position.

The truck is currently at a service station as it developed a "death wobble" while driving down the freeway a shimmed so hard I couldn't control it but managed to get it to the side of the road and finally to a stop. I did not receive any type of warning. I am being told by the mechanic at the service station it is going to require a rebuild of the front suspension. After checking to see if this has been a recall issue, I found there had been 3 but I did not receive notification of this particular recall. Not sure if the age of the truck prevents me from going back to have Dodge resolve this issue. Any advice would be greatly appreciated.

The windshield wipers stopped working as Hurricane Nicole was hitting Lantana Florida. Got truck home and replaced wiper motor. Did not fix the problem. Replaced the Multi-function Switch (Mopar part#56049823AB) Did not fix problem. This happened around 1:00 pm. I was in traffic. It took about 1 1/2 hour to drive 10 miles because of rain bands from the storm. The wipers stopped working at regular speed and moved in slow motion at high speed, then stopped working altogether. I have not been to the dealer. I am told its probably the Body Control Module (BCM). This sound expensive. This happened 11/9/22

Driving down the road and lost all steering

1. The Panic Alarm randomly goes off without be activated by anyone. Possibly a TIPM issue which couldn't be investigated because it randomly went away. Maybe it will go off in the middle of the night in my subdivision. Who knows it's unpredictable. 2. Right Turn Signal & Stop Light would not work on the trailer. I confirmed that it wasn't an issue with the trailer but it was a problem with the TIPM (Totally Integrated Power Module) Output (not working). The TIPM has a LONG history of intermittent electrical failures. This is a Safety Issue and a vehicle investigation for ALL vehicles that have TIPMS. TIPMS have been known to cause random vehicle stall & other intermittent random electrical failures and shut downs since 2006 when they were first put in vehicles. A RECALL is long overdue because this is ONLY 1 example of a minor problem. I've only owned the vehicle for 1 week...what's next? TIPMS can cause the vehicle to act intermittently crazy. No warning lamps or fault messages.

The climate control will not change to defrost. It will only blow out the dash vents. My windshield foged up while driving 70mph and I could not see. Had to stop every few miles to use my t-shirt to clean it off. Very dangerous what if I was on a small country road, there is not much room for errors.

Drastic front end vibration and uncontrollable steering. Two incidents.

The contact owns a 2006 Dodge Ram 2500. The contact stated that while driving at 70 MPH and hauling a travel trailer, the vehicle wobbled, and the contact lost control of the vehicle when the front driver's and passenger's tires went in different directions. The contact was able to pull over and park the vehicle. The vehicle was towed to an independent mechanic and diagnosed with fractured linkages and damaged strut rods. The vehicle was not repaired and remained with the independent mechanic. Prior to the failure, the independent mechanic had replaced the stabilizer bar, tie rod end, steering ball joints, and linkages. The manufacturer was not made aware of the failure. The failure mileage was approximately 148,000.

The TIPM module is bad. This part controls quite a bit of electrical current to various areas of the vehicle. It stalls when stopped at a traffic light, it is not sending the brake light information to an attached trailer (left side only), gauges inside the vehicle have stopped working (to name a few of the items being affected by this control). This part can be inspected as it is currently still on the vehicle. Safety is a concern due to either not being able to move out of the roadway, and also when pulling a trailer as no one will see turn signals or brake lights on the tow vehicle as the power isn't going to the trailer lights. I was informed of the malfunction at a trailer dealership. The problems have been getting worse over the last 4 years of ownership of this vehicle. The check engine light is currently on, even though what the computer read out gave has now been repaired. There has currently been no accident that this vehicle has been involved in.

While driving at highway speed in my 2006 Dodge Ram 2500 truck, the truck's front wheels began to violently shake and wobble with incredible vibration and bumpy ride. I thought I would lose control of the vehicle. I slowed, turned on my emergency flashers and hit the brakes pulling off the interstate. After a few minutes I continued on only to have the same incident described happen again a few miles later. I contacted the local Chrysler dealership and made an appointment, detailing the incident. I was told my truck was not covered by a safety campaign.

In 2006, I bought this truck new and for the 3rd time I am again putting it in for repairs for the same problem, a /c blend doors. I do not believe this is a safety issue, but has cost me an average of $1000.00 each time (x3). The last visit I had the cooling system replaced (2019) and here again the same problem has happened again. This first time I had the dealer fix it and I recall that visit cost me around $2500.00. I still like this vehicle and it runs fine with 124.000 plus miles. But, if I decide to get rid of it it will be because of this A/C problem and will have an impact on what to replace it with.

I WAS DRIVING ON I-75 @70MPH, A LOUD BANG HAPPENED, TRUCK SHUT OFF, I GUIDED IT OFF THE ROAD. I HAD WIRES HANGING I LOOKED FURTHER AND SEEN THE FRONT DRIVE SHAFT BLEW APART. MY MECHANIC SAID IT HAD LOCKED UP. THE TRANSFER CASE, TRANSMISSION, FLOOR BOARD OF THE TRUCK WAS ALSO ALL DAMAGED. ALSO SAID I WAS LUCKY THAT THE TRUCK DID NOT CAUSE A SERIOUS ACCIDENT. THIS TRUCK IS A 2006 DODGE RAM 2500 HD. WELL TAKEN CARE OF. NO GIVEN REASON WHY THIS HAPPENED. MY MECHANIC SAID HE HAS SEEN THIS MANY TIMES IN THE DODGE TRUCKS THAT THE FRONT DRIVE SHAFT BLOWS APART. TOTAL DAMAGES WILL BE THE COST OF $8,000-$10,000

STEERING DRAG LINK BREAK WITH A CLEAN SHEAR IN THE ROD ITSELF. LUCKY, VEHICLE AT LOW SPEED BACKING INTO DRIVEWAY. ALL STEERING CONTROL LOST. WOULD BE A DEADLY SITUATION ON THE ROAD.

FUEL TANK STRAPS CORRODED AND BROKE OFF WHICH CAUSED FUEL TANK TO FALL OUT OF VEHICLE WHILE DRIVING DOWN THE ROAD.

BLINKERS WILL TURN ON IN OPPOSITE DIRECTION OF WHAT LEVER IS APPLIED. RIGHT TURN SIGNAL COMES ON WHEN YOU TURN LEVER TO LEFT TURN. WINDSHIELD WIPERS RUN INTERMITTENTLY WHEN ON.

REPLACED BATTERY CABLE. RECONNECTED CABLE AND AIR BAG DEPLOYED. TO TO CHRYSLER DEALER AND WAS TOLD IT HAS A BROKEN CLOCK SPRING AND CHRYSLER IS COVERING THE REPAIR

TL* THE CONTACT OWNS A 2006 DODGE RAM 2500. THE CONTACT STATED THAT THE HEADLIGHTS AND TURN SIGNAL SWITCH MALFUNCTIONED CAUSING THE SIGNAL TO FLASH INCORRECTLY INTERMITTENTLY. THE CONTACT STATED THAT THE HEADLIGHTS WERE DIM. THE VEHICLE WAS NOT DIAGNOSED NOR REPAIRED. A DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 130,000.

AIRBAG LIGHT CAME ON, A/C & SEAT HEATERS WON'T WORK. COLD START IN MORNING, AIRBAG LIGHT GOES OFF, A/C WORKS & SEAT HEATERS OK. TURN ENGINE OFF, NEXT START OF ENGINE, AIRBAG LIGHT ON, NO A/C OR SEAT HEATERS UNTIL NEXT MORNING. FIRST TIME THIS INCIDENT OCCURRED VEHICLE WAS STATIONARY, IN STORE PARKING LOT. AIRBAG LIGHT ON DURING TRIP HOME. AIRBAG INOPERABLE WHEN LIGHT IS ON.

WHILE DRIVING ON NORMAL PAVED ROAD, NO EXCESSIVE BUMPS) AT AROUND 40 MPH, THE FUEL TANK BRACKETS (STRAPS) BROKE AND THE FUEL TANK FELL TO THE GROUND. I HEARD IT RIGHT AWAY AND ONLY DROVE AN ADDITIONAL FEW SECONDS TO A SAFE PLACE TO PULL OFF THE ROAD (NOT KNOW WHAT INITIAL HAPPENED - THOUGHT SOMETHING WAS CAUGHT IN THE WHEEL WELL). WHEN I NOTICED THE PROBLEM, I IMMEDIATELY TURNED OFF THE VEHICLE AND CALLED FOR A TOW TRUCK. WHILE WAITING, I CLEARLY NOTICED THE TANK STRAPS WERE RUSTED AND FAILED. ALSO WHILE WAITING FOR THE TOW TRUCK, I SEARCHED TO SEE IF OTHERS HAD A SIMILAR ISSUE. I FOUND THAT RAM DOES HAVE A RECALL FOR THIS EXACT ISSUE, BUT IT DOESN'T COVER THE YEAR OF MY TRUCK. CLEARLY THE YEARS AFFECTED NEED TO BE EXPANDED AS MY VEHICLE HAD THE EXACT FAILURE THAT THE RECALL ADDRESSED. THIS INCIDENT OCCURRED ON OCTOBER 4, 2020 AT APPROXIMATELY 12:15 IN THE AFTERNOON ON RTE 122 IN BLACKSTONE MA JUST SOUTH OF THE MILLVILLE BORDER. NO POLICE EVER PASSED OR STOPPED BY. NO OTHER VEHICLES WERE INVOLVED.

DRAG LINK BROKE CAUSING LOSS OF STEERING. THIS WAS A DURALAST DRAG LINK P/N DS1463 PURCHASED FROM AUTOZONE IN 2018 TO REPLACE A BENT OEM PART. FAILURE OCCURRED AT 35MPH ON A DIRT ROAD AND I WAS ABLE TO SAFELY STOP. DRAG LINK BROKE AT UPPER END NEAR STEERING BOX AT THE MACHINED SHOULDER WHERE THE THREADS END. BEACH MARKS AND A DARK AREA INDICATE EXISTING CRACK AT THIS LOCATION FOR SOME TIME PRIOR TO FAILURE, HOWEVER THERE WAS NO INDICATION OF IMPENDING FAILURE PRIOR TO EVENT. TRUCK HAS EXPERIENCED RECENT PROBLEM WITH DEATH WOBBLE AT FREEWAY SPEEDS WHICH WAS CORRECTED BY TIRE CHANGE AND NEW SHOCK ABSORBERS.

I BOUGHT THE 2006 DODGE RAM 2500 WITH 149,500 MILES ON THE ODOMETER(IT NOW HAS 165,550 AS OF 7/26/20) AND ABOUT 5 MONTHS AFTER BUYING THE TRUCK, I RAN A CAR FAX ON THE VEHICLE TO SEE IF HAD ANY PREVIOUS ACCIDENTS AND FOUND OUT THAT APRIL 8TH 2019 AT THE AUTO AUCTION SOUTHEASTERN REGION, THE TRUCK WAS REPORTED HAVING 191,613 MILES ON THE ODOMETER

COLUMN SHIFTER LEVER HAD BEEN DIFFICULT TO MOVE FOR MONTHS FROM P (PARK) TO ANY OTHER GEAR (R, D, 1-2-3). THE SHIFTING MECHANISM BROKE TODAY AFTER I STARTED THE ENGINE (TRUCK HAD BEEN PARKED OVERNIGHT IN MY HOME'S DRIVEWAY) WHEN I TRIED TO MOVE THE SHIFTER FROM PARK TO REVERSE TO EXIT THE DRIVEWAY AND DRIVE VEHICLE ELSEWHERE. SHIFTER WILL NOT ENGAGE TRANSMISSION INTO ANY GEAR NOW; TRUCK IS NOT DRIVABLE. REQUIRED AN OVERSIZE ROLLBACK TOW TRUCK TO COME GET IT AND TAKE IT TO A REPAIR SHOP SINCE MY PICKUP HAS A LONG BED.

WE WERE DRIVING DOWN INTERSTATE 30 IN MT VERNON TX AT APPROXIMATELY 65 MPH AND HEARD LOUD EXPLOSION AND IT WAS THE SUNROOF THAT SHATTERED FOR NO APPARENT REASON BECAUSE THERE WERE NO VEHICLES IN FRONT OF US SO NOT LIKELY ANY DEBRIS COULD HAVE HIT IT

TAKATA RECALL. I HAVE TRIED 7 TIMES TO GET THIS FIXED AT THE CLOSEST DEALER BUT THEY WON'T DO IT. IT IS A 70 MILE TRIP TO THEM AND THEY ALWAYS SAY THEY CANT FOR 2 OR 3 WEEKS FROM WHEN I'M THERE. THEY TELL ME IT ONLY TAKES AN HOUR BUT EXPECT ME TO SCHEDULE OUT 2 OR 3 WEEKS. WITH THE JOB I WORK I SIMPLY CANNOT DO THAT. SEEMS LIKE THEY DON'T CARE WHEATHER MY WIFE AND I LIVE OR DIE.

TWO TIMES I HAVE HAD ISSUES WITH THE ACCELERATOR STICKING AND THERE WAS NO WAY TO SLOW MY TRUCK DOWN TO GAIN CONTROL. BOTH TIMES IT HAPPENED WHEN I WAS PASSING ANOTHER VEHICLE WHEN I WAS ON HIGHWAY 99 BETWEEN CORVALLIS, OR AND MONMOUTH, OR. BOTH TIMES IT WAS ON A STRAIGHT STRETCH. WHEN I WENT TO PASS, I PRESSED ON THE ACCELERATOR TO GET SOME SPEED. I FLOORED IT. BOTH TIMES THE GAS PEDAL STUCK DOWN TO THE FLOOR AND I WAS NOT ABLE TO GET IT TO RELEASE. THE TRUCK KEPT ACCELERATING TO UP OVER 100 MPH BEFORE THE GAS PEDAL RELEASED AND I WAS ABLE TO GAIN CONTROL OF THE TRUCK AGAIN. NOTHING I DID WOULD GET IT TO RELEASE. IT WAS EXTREMELY SCARY AND I THOUGHT I WAS GOING TO WRECK, IF NOT DIE. I AM NOT SURE WHICH PART CAUSED THIS BUT IT IS CONNECTED TO THE GAS PEDAL. IT MIGHT BE AN INTERNAL COMPONENT, I JUST DON'T KNOW, SO IT IS UNKNOWN. IT SEEMS TO DO IT WHEN THE GAS PEDAL IS FLOORED AS THAT IS WHAT HAPPENED BOTH TIMES TO ME. I WASN'T SURE IF I SHOULD LIST EACH TIME SEPARATELY SO YOU KNEW IT WAS MORE THAN ONCE. I WILL BE TAKING MY TRUCK IN TO BE CHECKED AS SOON AS POSSIBLE SINCE THIS HAS NOW HAPPENED TWICE AND I DON'T WANT THIS TO HAPPEN AGAIN.

COMPUTER CONTROLED VEHICLE CHARGING SYSTEM CAUSED THE PASSENGER SIDE BATTERY TO OVER CHARGE (DASH GAUGE INDICATING OVERCHARGING) AND SWELL CAUSING IRREPARABLE DAMAGE AND EXPLOSION OF THE BATTERY. THIS COULD HAVE STARTED AN ENGINE FIRE UNDER THE HOOD. FORTUNATELY IT DIDN'T. VEHICLE WAS ON MAIN INTERSTATE HIGHWAY WHEN THIS OCCURRED. I CONTACTED THE BATTERY MANUFACTURER THINKING IT WAS A BAD BATTERY, BUT THE TECHNICIAN STATED DODGE CHARGING SYSTEMS OF THIS PERIOD WIRED THE BATTERIES IN PARALLEL INCORRECTLY CAUSING THE AUX BATTERY TO OVERCHARGE WHILE THE MAIN BATTERY WAS READING UNDERCHARGED. "BATTERIES IN TRUE PARALLEL SHOULD BE CONNECTED NEGATIVE TERMINAL TO NEGATIVE TERMINAL AND POSITIVE TERMINAL TO POSITIVE TERMINAL." THE DODGE RAM 2500 24V CUMMINS I OWN (COMPLETELY STOCK) HAS THE NEGATIVE TERMINAL CABLE FROM EACH BATTERY CONNECTED DIRECTLY TO THE ENGINE BLOCK FOR GROUND. AND NOT CONNECTED TO EACH OTHER AT ALL. AGAIN, A PROPERLY WIRED PARALLEL BATTERY SYSTEM SHOULD HAVE THE NEGATIVE TERMINAL CONNECTED TO EACH OTHER. ACCORDING TO THE BATTERY MANUFACTURER TECHNICIAN, THIS WOULD BECOME A PROBLEM WITH CURRENT FLOW BETWEEN THE TWO BATTERIES AND CAUSE UNBALANCED CHARGING DUE TO THE VEHICLE COMPUTER READING THE MAIN BATTERY VOLTAGE ONLY AND SIGNALING THE ALTERNATOR TO CHARGE AT HIGHER VOLTS IF THE MAIN IS READING LOW. (WHICH HAPPENS WHEN THE ENGINE IS STARTED... ESPECIALLY IN COLD WEATHER). AND ONCE THE MAIN BATTERY SENSOR SIGNALS THE COMPUTER AND THE COMPUTER SIGNALS THE ALTERNATOR

TL* THE CONTACT OWNS A 2006 DODGE RAM 2500. THE CONTACT STATED THAT THE FRONT DRIVER'S SIDE AND REAR PASSENGER SIDE RIMS WERE CRACKED. THE DEALER AND MANUFACTURER WERE NOT NOTIFIED. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE FAILURE MILEAGE WAS 360,000.

HISSING NOISE WHEN STEERING WHEEL IS TURNED. READING INFO ON THE WEB IT STATES THAT THERE WAS A DEFECT IN THE MANUFACTURING OF THE HYDRO-BOOST HOSE. I HAVE PROVIDED THE TECH BULLETIN. ALOT OF TRUCKS ARE HAVING THIS PROBLEM. CASE NUMBER: S1119000007 RELEASE DATE: 09/17/2011 SYMPTOM/VEHICLE ISSUE: POWER STEERING HONK OR HISS MAY BE HEARD DURING BRAKE APPLICATIONS. DIAGNOSIS: CUSTOMERS MAY COMPLAIN OF A NOISE (HONK - SOMETIMES COUPLED WITH A HISS DURING BRAKE APPLICATIONS) DURING LOW SPEED PARKING LOT MANEUVERS. IF YOU HAVE THIS COMPLAINT, PLEASE PERFORM THE FOLLOWING: REPAIR PROCEDURE: 1. INSPECT THE STEERING COLUMN INTERMEDIATE SHAFT BOOT IS IN POSITION AND NOT MAKING NOISE FROM RUBBING ON THE SHAFT. IF THERE IS A NOISE WHEN TURNING THE STEERING WHEEL, ADJUST THE BOOT APPROPRIATELY AND VERIFY THE NOISE IS NO LONGER PRESENT. 2. IF THE NOISE IS STILL PRESENT, PERFORM A STEERING SYSTEM BLEED PROCEDURE OUTLINED ON TECHCONNECT >SERVICE INFO>19-STEERING>PUMP>STANDARD PROCEDURE>POWER STEERING SYSTEM BLEEDING AND VERIFY THE NOISE IS NO LONGER PRESENT. 3. IF THE NOISE IS STILL PRESENT, VERIFY THAT THE PRESSURE HOSE (TO HYDRO-BOOST) INTERNAL TUNER (WHITE PLASTIC HOSE) HAS NOT BECOME DISLODGED AND POSITIONED INTO THE HYDRO-BOOST, TO DO THIS DISCONNECT THE PRESSURE HOSE FROM THE HYDRO-BOOST AND SEE IF WHITE PLASTIC TUBE IS PROTRUDING FROM THE PRESSURE HOSE. IF IT HAS, REPLACE THE HOSE*, BLEED THE SYSTEM OF AIR AND VERIFY THE NOISE IS NO LONGER PRESENT. NOTE: WHEN RETURNING THE HOSE TO THE

MY VEHICLE HAS GONE INTO WHAT IS DESCRIBED AS A "DEATH WOBBLE" ON FOUR DIFFERENT OCCASIONS, WHILE MOVING. TWICE ON THE FREEWAY, ONCE COMING DOWN-HILL ON A MOUNTAIN ROAD AND THE LAST ON A TWO LANE ROAD. WE HAVE VERBALLY COMPLAINED TO THE DEALER TO NO AVAIL. THESE INCIDENTS HAVE OCCURRED AT DIFFERENT SPEEDS AND ON ONE WE HAD AN UNGUARDED CLIFF ON ONE SIDE.

EXPERIENCING WHAT PEOPLE CALL DEATH WOBBLE. 18 MONTHS AGO HIT A BUMP ON THE HIGHWAY AND FRONT END SHOOK VERY HARD, I THOUGHT I HAD A FLAT TIRE. NOTHING FOUND AND DIDN'T DO IT FOR ABOUT A YEAR. THIS SUMMER IT STARTED DOING IT AND BECAME A REGULAR OCCURRENCE. STARTS WHEN HITTING A BUMP ABOVE 60 MPH. ONLY WAY TO STOP IT IS TO SLOW DOWN TO BELOW 30 MPH...VERY SCARY IN HIGHWAY TRAFFIC. ONCE HAD A TRACTOR TRAILER VEER OFF THE ROAD BEHIND ME. HAD 2 SHOPS LOOK AT IT AND CAN'T FIND ANYTHING OBVIOUS. REPLACED TRACK BAR, WHEEL BEARING, STABILIZER SHOCK, REGULAR SHOCKS, STEERING GEAR AND HAD FRONT END REALIGNED. NOTHING IS FIXING IT. VEHICLE IS STOCK HEIGHT...NO MODIFICATIONS.

FEDERAL MOGUL ISSUED A RECALL ON MOOG BRANDED STEERING COMPONENTS ASSOCIATED TO THE PARTS THAT HAVE BEEN INSTALLED ON MY 2006 DODGE RAM 2500. WAITING ON RESOLUTION AND THE WAY AHEAD TO FIX CURRENT ISSUES BEING THE FAILURE COULD BE LIFE THREATENING.

DEATH WOBBLE ON HIGHWAY AFTER HITTING A BUMP IN THE ROAD. THE TRUCK STARTS SHAKING AND UNABLE TO CONTROL THE VEHICLE WHILE THIS IS GOING ON. SEATBELTS WILL NOT RELEASE ONCE THIS HAPPENS, EVEN WHEN SEAT BELT IS RETRACTED ALL THE WAY.