My motorcycle has what I call a "double pull' front brake problem. When the brake lever for the front brake is pulled, I get a significant difference in lever pull. On the first pull the lever comes close to the handle bar. If I release the lever and pull it a second time, the lever pulls to a normal reach. I would add the brakes engage/bite much better and what would be expected for a high performance brake system from Brembo on the second lever pull. Having to pump the brakes is a safety concern to both the rider and those in traffic. I have taken the motorcycle to my local Triumph dealer while it was under warranty. They were not able to fix the problem. I also reached out to Triumph North America and was told to take it to the dealer. I believe the bike was in the shop on two occasions but I only have paperwork for one of them. The brake fluid is at a good level and has been serviced/bleed three times with the problem instantly returning. No leaks can be found on the brake system. No warning lights on the motorcycle. The problem started around 1,000 miles on the motorcycle. I purchased the motorcycle new in August 2018 as a brand new 2016 model year left over. The manufactures warranty ran out in August 2020. I have been hesitant to aggressively pursue the problem as it seems Triumph has not found a resolution to fix the problem. There seems to be a common problem with this for many people with this motorcycle/brake system. Many people with this problem have taken the mot
2016 Triumph Speed Triple
Owners filed 2 complaints about this vehicle with federal regulators, most often about the service brakes. No safety recall has been issued.
| Component | Reports | Crashes | Fires | Injuries | |
|---|---|---|---|---|---|
| Service Brakes | 2 | 0 | 0 | 0 |
What owners reported
Newest filingsThis is a fairly well known issue for this year Triumphs, as well as other Makes/years, fitted with this type of Brembo brakes. The brakes have an inconsistent pressure issue during operation. The first pull of the brake is soft and "spongey" and takes multiple pulls to build pressure. Full bleeding of brake system, replacement of pads, etc. does not resolve the issue. this is obviously a huge safety concern as it does not allow the rider a clear and consistent braking operation, which can cause them to over/under apply the amount of necessary braking and pose a large risk to themselves as well as others on the road.
2 of 2 complaints, reproduced as filed.
Across model years
Worst on record: 2005Reading this record
No unusual pattern of severe incidents in the complaint record.
Complaint counts track how many cars were sold and how long they have been on the road as much as they track quality. A common model from 2013 has had a decade to accumulate reports; a rare one from last year has not. The signal worth weighing is in the severity columns, in whether the same component keeps appearing, and in whether the manufacturer eventually opened a recall for it.
Most recent recall on file: none. Source: NHTSA Office of Defects Investigation.