2015 Infiniti Q50

Defect. Nissan North America, Inc. (INFINITI) is recalling certain 2011-2013 M56, 2012-2013 M35 Hybrid, 2014-2018 Q50, Q70 Hybrid, 2014-2019 Q70, and 2015-2019 Q70L two-wheel drive vehicles. The driveshaft can fatigue and break.

Risk. A broken driveshaft can result in a loss of drive power, or a vehicle roll away when the vehicle is in park without the parking brake applied. Both scenarios can increase the risk of a crash.

Remedy. Dealers will replace the driveshaft, free of charge. Owner notification letters were mailed August 13, 2024. Owners may contact INFINITI's customer service at 1-800-662-6200. INFINITI's numbers for this recall are R24A5 and R24A7.

Defect. Nissan North America, Inc.'s (Nissan) is recalling certain model year 2014-2016 Infiniti Q50 vehicles manufactured December 26, 2012, to December 11, 2015, and Infiniti Q50 Hybrid vehicles manufactured December 10, 2012, to December 17, 2015. The Direct Adaptive Steering system may experience an error at vehicle start up altering the vehicle's steering responsiveness and turning radius.

Risk. If the vehicle does not steer as the driver anticipates, there is an increased the risk of a crash.

Remedy. Nissan will notify owners, and dealers will reprogram the Direct Adaptive Steering ECU software, free of charge. The recall began on August 12, 2016. Owners may contact Nissan customer service at 1-800-647-7261.

Defect. Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF, Sentra, and Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60, QX60 Hybrid, and Q50 Hybrid, 2014-2017 Nissan Rogue and Infiniti Q50, 2015-2016 Nissan Murano, Murano Hybrid, and Chevrolet City Express, 2014-2015 Nissan Pathfinder Hybrid, and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash.

Risk. If the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury.

Remedy. Nissan will notify their owners. Chevrolet City Express owners will be notified by General Motors. Dealers will reprogram the Air Bag Control Unit (ACU) and OCS Electronic Control Unit (ECU) in Altima, Maxima, Murano, Rogue, and Sentra vehicles, and replace the OCS ECU in LEAF, NV200, NV200 Taxi, Pathfinder, Infiniti Q50, JX35, and QX60 and Chevrolet City Express vehicles, free of charge. Interim notices were sent to owners on May 31, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Nissan customer service at 1-800-867-7669, Infiniti customer service at 1-888-833-3216 or Chevrolet customer service at 1-800-222-1020.

I was parked in my garage getting ready to start my car and the glass in my moonroof spontaneously shattered. There was no object that hit it because I was in my garage. It sounded like a gunshot. The glass flew upward and the glass looks like it shattered into a little volcano on the edges.

While operating the vehicle, the transmission suffered an abrupt failure resulting in Diagnostic Trouble Code (DTC) P0720 (Output Speed Sensor Circuit). Further diagnostic inspection revealed a complete internal failure of the integrated valve body assembly, which houses the Transmission Control Module (TCM), solenoids, and output speed sensors. The failure caused an immediate loss of gear selection, restricting the transmission to 3rd gear ("limp mode"). Attempting to accelerate beyond 3rd gear causes violent vehicle shaking, severe hesitation, and an inability to maintain traffic speeds due to the TCM losing signal input from the speed sensors and solenoid circuits. This total valve body/TCM failure creates a critical safety hazard. Sudden restriction to 3rd gear without warning on highways or during turn movements leaves the vehicle unable to match surrounding traffic speeds, creating an immediate risk of a rear-end or side-impact collision. The vehicle has been strictly maintained according to manufacturer schedules. Because Nissan/Infiniti designed the TCM and speed sensors as an integrated unit inside the hydraulic valve body, a sensor failure requires replacing the entire valve body/TCM unit—a repair quoted at over $3,000, with complete transmission replacement exceeding that cost. This valve body/TCM failure mode is widely documented among Infiniti Q50 owners sharing the RE7R01A 7-speed automatic transmission platform, indicating a widespread electronic and mechanical

After starting the car the steering wheel jumps off center and the steering is all over the place. have to start the car again and the steering wheel jumps the other direction. I strongly suggest this is exactly what the June 13, 2016 NHTSA campaign number 16V43000 the software may reduce steering ability and increase risk of crash.the direct steering system my experience an error at vehicle start up altering the vehicle steering responsiveness and turning radius. Exact problem with this car. This car has been recalled for the driveshaft break NHSTA 24V470000

DIRECT ADAPTIVE STEERING EXPERIENCEING AT START UP ALTERING THE VEHICLES STEERING AND RESPONSIVENESS AND TURNING RADIUS DOES NOT WORK AND IS INCREASING THE RISK OF A CRASH. VERY UNSAFE TO DRIVE. THERE IS A RECALL 16V430000 ON THIS VERY PROBLEM. HAVE BEEN TOLD BY DEALERSHIP AND NISSAN MOTORS THAT MY CAR IS NOT ON THE RECALL AND I WILL HAVE TO PAY MY SELF TO GET FIXED AND TO SEE IF THAT IS THE PROBLEM. READING THE NHTSA CAMPAIGN NUMBER:16V430000 THIS IS THE EXACT PROBLEM WITH THE DIRECT ADAPTIVE STEERING SYSTEM ON THIS CAR. I BELIEVE THIS SHOULD BE COVERED BY THE RECALL!

While driving my 2015 Infiniti Q50s, the transmission suddenly suffered a catastrophic electronic failure, causing the vehicle to immediately drop into "limp mode." This resulted in a sudden and dangerous loss of acceleration while operating in traffic. A diagnostic scan revealed trouble codes P0500 and P0720 (Output Speed Sensor circuit). However, following Infiniti's official Technical Service Bulletin (TSB ITB19-040), the actual failure was the Transmission Control Module (TCM), which is permanently integrated into the transmission control valve body inside the transmission. Because the speed sensor cannot be replaced independently of the integrated module, I was forced to pay out-of-pocket to replace the entire transmission control valve body assembly and have a dealership program the new unit. This is a widely documented, premature failure on this vehicle platform that creates an immediate highway safety hazard when the vehicle drops power without warning.

DAS issue that I have been dealing with for two months now, issue is still not resolved even after taking out a personal loan for 6k to fix the modules at Douglas Infiniti, waited weeks for the modules, they replaced the modules, did the calibration but a new issue is happening where I'm losing control for a split second and the car would either pull to the left or right egregiously. I took it to back to Douglas Infiniti for the issue, they found code C13E9-00, cleared the code and did the calibration again only for the issue to happen again once I was close to getting home. Spoke with Martin the advisor and he is saying that he thinks its an issue with the rack and pinion and not a software issue. I bought the rack and pinion from infiniti's wholesale direct website, the rack and pinion came from Infiniti of Winston Salem, so it's an OEM rack and pinion, he said I should take it back to the shop where I got it installed and have them check their work, even though they were able to calibrate the system once the new modules were installed, certify their work and give me back to the keys to the car only for the issue to happen again. Took it back to DriveWorks Auto Center in Union, NJ and they couldn't find any issue with the rack & pinion, said I need a wheel alignment thought, went and got a wheel alignment. Driving home from work yesterday on [XXX] going down the hill and the car steering went out momentarily and the car started pulling to the right, straightened the wheel a

The valve body on these cars are useless. Driving down a highway and cant shift out of 3rd gear almost had a car re-end me. Today I am driving and the ECU is not responding I see the check engine light on then I'm like not again. This would be the 3rd valve body I replaced. First I replaced the whole transmission thinking that is what I needed and advised that the valve body and the transmission are one. Yet no they come in parts. Anyways today I am waiting to get home, but the car is not reading my key fob why? Then the ECU and code U0100 is popping up. Something new and turns the car off. The shifting that happen earlier was just a light bulb of I already knew what is wrong. I felt the car shift with a hunch so I looked at my dash board and saw the check engine light again and was like not again. Please not again. Now on the dash board I see AWD and chassis issue. Then online I am told electrical problem and or ECU module not reading correctly. Like what is up with these push to starts. They are becoming a headache. I need to know just why I am replacing my valve body now for the 4th time???? This all can cause an accident that my car randomly slows down.

The transmission speed sensor has failed needs a new valve body. It seems like a very common problem with this car and it’s a $3000 fix according to my mechanic. I think there needs to be a recall issued considering everybody on this website is reporting the same problems.

The contact owns a 2015 Infiniti Q50. While driving at various speeds, the transmission was slow to shift. The vehicle failed to properly accelerate while depressing the accelerator pedal, and the check engine warning light remained illuminated. The vehicle was taken to a local transmission mechanic to be diagnosed, and it was determined that the gear ratio and speed sensor inside the transmission valve body were faulty, and that the valve body needed to be replaced. The valve body was replaced, and the failure was repaired; however, one week later, the failure reoccurred. The vehicle was taken back to the mechanic, and it was informed that the transmission needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were not contacted. The failure mileage was 99,000.

Transmission Control Body. Lost of speed during driving which put me in danger of being hit from behind on the highway. The car was scanned and came up the code P0500 and P0720.

The door lock of the driver's door is stuck in the locked position and the door cannot be unlocked or opened. It will not unlock using the key fob, nor with the manual control inside the door, nor with the emergency key from outside the car. This could trap an inured driver inside the car in the event of an accident. The car has not yet been inspected by anyone. There was no warning lamps or messages prior to the failure. Earlier that same day the door failed to open while in gear but did so when I shifted to park. As this car was very recently purchased by me and I am still learning about it, I failed to recognize this a symptom of an impending failure. Regardless of that warning, total failure occurred the same day. As a graduate engineer who has worked in engineering related fields for more then 50 years I can recognize that a failure mode such as this is both a health and safety hazard to occupants in the event of an accident and a design defect that should not be allowed to be sold to the general public. Thank you for any consideration you give this complaint.

Was making a left turn when the steering stopped working and the motor lost power, the adaptive steering quit working after approximately 15 mins. I started the car and it was working. Went a half mile made a right turn and it went out again. Shut off the motor tried to start it and could not. 20 mins later it started and has been working since. Dealer couldn't find the problem and wouldn't fix it, they also said that their were no recalls but I know that is not true. Infiniti had a law suit brought against them for the adaptive steering issue. If they fixed it why doesn't it work right.

Unknown. Started to make left turn steering made loud banging noise then lost all power. Stepped on gas pedal would not go lost steering control and coasted to a stop. Adaptive steering went out. Almost got hit by on coming traffic.

Transmission valve body failed while driving which caused shifts to be limited. It could have caused an inability to shift at all, which is a safety issue. This issue has been inspected and confirmed by an independent shop. No warning signs were present before the failure. Furthermore, this issue is well known to Infiniti. It’s caused by breakdown of the transmission fluid overtime, causing a reduction in the cooling capacity of the fluid. But Infiniti says that the fluid should be lifetime. This overheating causes the TCM on the valve body to fail. If it failed while I was going at a highway speed I could have been injured.

The car just slowed down super fast on freeway almost got rear ended. It would not go past 3rd gear. Poor acceleration. Could have caused a huge accident. I got it diagnosed and they said it is valve body/speed sensor/tcm and they said this is a COMMON problem for 2015 Q50. I replaced this part 2 years ago and here we go again. Shop diagnosed and said this tcm (transmission control module which is in the transmission) but they have to change whole transmission. Everything happened all the sudden then check engine light came on.

P07200 code came up, transmission is no good because of a cheap sensor that's impossible to fix. seems to be very common and very inconvenient

I’m reporting issues with the valve body on a 2015 Q50. I have had to replace the valve body already at cost of $1700. Many others have had same issue as this is a common defect with the TMC part. This needs to be addressed as a recall.

Adaptive steering clicks and looses control. Steering wheel jerks back when self aligning. There was a recall for this I believe in June 2016. For 2015 infinity Q50’s but my VIN says that it wasn’t recalled but is the exact description of what is happening.

The contact owns a 2015 Infiniti Q50. The contact stated while driving 40 MPH, the accelerator was depressed; however, the vehicle failed to shift into gear properly, with the check engine warning light illuminated. The vehicle was able to be restarted. The vehicle was taken to an independent mechanic, where it was diagnosed that the transmission valve body had failed, and the transmission needed to be replaced. The vehicle was not repaired. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 94,150.

Just over 1 week ago, I was leaving a parking lot and driving back to my home when my car wouldn't accelerate past about ~10-15 miles per hour and wasn't shifting gears. When I took my foot off the gas pedal, the gear just dropped immediately from above third to first gear and the car shook. I first noticed this when already out of the parking lot and pulling off from a median onto the road, with no engine light or other warnings. I quickly pulled into the turn lane where there wasn't traffic and turned the car off and back on. It was the same but luckily I was in eyes view of my apartment, so I drove under 10 mph and made it home. I took the vehicle to a transmission service center and the error code that came up on the computer was (P0500 - Vehicle Speed Sensor A), which the service center said is an issue with the "valve body" inside the transmission, specifically the "TCM - Transmission Control Module" that sits on top of the valve body. I contacted multiple Infiniti service centers and they all confirmed that the valve body for my vehicle (part# 31705-x133a) is back ordered by over a month and could be longer until they have it. They do not sell the Transmission Control Module separately. The valve body was quoted to me for $2200 for the part alone. I attempted to install an aftermarket valve body and a new error code came up on the computer (PO720 - Output Speed Sensor Circuit). I kept the original valve body and will hold onto it. Doing some more research, this appears