2021 GMC Sierra 1500 complaints

At cold start-up, engine (6.2) makes a metal-to-metal grinding sound for 60-90 seconds. After warm-up, a steady tick on the right side of the engine while running. I contacted GM and they said, " this was normal at start up". however, with me being a mechanical engineer, all of my school and working experience tells me anything grinding metal to metal is not good.

Engine seized and now we need a new motor

The contact owns a 2021 GMC Sierra 1500. The contact stated that while driving 30 MPH, there was an abnormal knocking sound coming from the engine compartment, after which the vehicle lost motive power. The contact was able to pull over to the side of the road. No warning lights were illuminated. The vehicle was taken to a dealer, who determined that the engine needed to be replaced. The vehicle was repaired. The contact stated that prior to the engine failure, the transmission was replaced. The manufacturer was not notified of the failure. The failure mileage was approximately 20,000.

I own a 2021 GMC Sierra 1500 Duramax diesel. At around 60,000 miles, I received an engine coolant system alert through OnStar and retrieved a P1098 trouble code, which indicates a failure in the coolant control valve. This issue causes the engine fan to run excessively, creating loud noise, reduced fuel economy, and possible drivability concerns. After researching owner forums and talking to multiple service departments, I discovered this is a widespread problem among 2020–2022 GMC/Chevrolet Duramax 3.0L diesel owners. In many cases, the coolant control valve is failing prematurely, and the replacement part is on national backorder, suggesting a high failure rate. GM has not issued a recall or service bulletin to address the issue, and many customers are being told to pay out of pocket despite the systemic nature of the failure. This component is tied to engine temperature control, and failure could pose a safety risk if the engine overheats or derates unexpectedly. I am filing this complaint to document the issue and request NHTSA investigate this as a potential defect.

The contact owns a 2021 GMC Sierra 1500. The contact received notification of NHTSA Campaign Number: 24V797000 (Power Train); however, the dealer was unable to complete the recall and returned the vehicle to the contact in a worse condition than when the contact had dropped the vehicle off at the dealer. The contact stated that while attempting to drive the vehicle off the dealer parking lot, the check engine and reduced power warning lights flashed on the instrument cluster. The contact stated that he returned the vehicle to the dealer and was informed that the vehicle could not be repaired. The manufacturer was not made aware of the issue. The failure mileage was approximately 114,000.

My truck was part of a GM buyback program where GM Corporation bought the truck back to fix it around Aug 7th 2023 for engine problems. I am reporting this because I do not believe that GM ever reported this to NTSHA. There are also other issues happening at the same time period that should be looked into that may or may not be coincidences. At or before 10,126 miles the truck started having engine lifter and other engine issues. General Motors will not tell me exactly what was done other than lifters according to paperwork supplied. It may have had other issues like a spun bearing but it was never disclosed. Can NTSHA please look into this and information is found, could I please get the records. I asked for the paperwork of what was done while GM owned and troubleshot all the problems. I was told that information is only available to the original owner and I could not have it. It is very frustrating when General Motors Corporate use owner’s personal data as a way to hide what was done and not have to disclose required information. I am asking for service records while General Motors owned it and the service records they did to fix it. I know that there are many more engine problems that are not documented on the vehicle summary. GM will not buy back the truck over a few lifter issues. The truck was later fixed and Art Gamblin Motorsv in Enumclaw Wa, purchased it. I am told it is fixed but have no real paperwork proving this, I was able to purchase an extended warranty just

The contact owns a 2021 GMC Sierra 1500. The contact stated that while driving 60 MPH, there was an abnormal knocking sound coming from the engine compartment, after which the vehicle lost motive power. The contact was able to pull over to the shoulder of the roadway, where the vehicle failed to restart. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, who determined that the engine had seized. The contact was also informed that the fuse box needed to be replaced. The vehicle was repaired, but the failure reoccurred. After investigating the failure, the contact related the failure to NHTSA Action Number: PE25001 (Engine, Engine and Engine Cooling). The manufacturer was not notified of the failure. The failure mileage was 63,000.

Truck started to lose power or slip on quick acceleration on highway Truck would jolt or shudder. 63000 miles. Dealer diagnosed truck needs Torque converter and a valve body replacement. No warning lights Contacted GM. Have a case number, was told to take to dealer. It’s at dealer now, getting repaired. I’m wondering if GM has a bigger problem with transmission recall

See attached document for complaint.

After 2 years of owning the vehicle, after every oil change, it would indicate low oil just before an oil change causing for us to add an additional a quart of oil to keep it running smoothly. We informed the service technician of the situation on multiple occasions and no further inspection was completed, and just an oil change was serviced. After a few months we noticed the engine was running rough and a white smoke coming out of the exhaust on acceleration then the check engine light came on. We brought the car to get tires replaced and to service the check engine light, the technician stated that the check engine light a failure in the catalytic converter. We brought the vehicle to the local GMC service center, where they indicated that the we required a replacement engine because of catastrophic engine failure. We reported that the check engine light was due to catalytic converter failure. The service technician ensured that the priority was the replacement of the full engine not indicating what was the main cause of engine failure stating that the catalytic converter could have led to the failure of the engine as well. We replaced the engine, and after 3 months of vehicle being in the shop the engine was replaced. Three days after receiving the vehicle, a check engine light came on. We did not drive the vehicle until we had to return it back to the service center. The service technician stated that it is due to a lack of communication from the engine to the ECU. The tec

The contact owns a 2021 GMC Sierra 1500. The contact stated while driving approximately 75 MPH, the rear wheels locked up. The failure had occurred on several occasions. The contact stated that several unknown warning lights were illuminated. The vehicle was towed to a dealer where it was diagnosed and determined that a software update was needed. The vehicle was repaired under an NHTSA Campaign Number: 24V797000 (Power Train); however, the failure persisted. The manufacturer was not notified of the failure. The failure mileage was approximately 35,000.

Multi functional tail gate will open on its own while driving. I have had this repaired by gm 3 times and still have issues. This problem is currently on the recall list for 2500 hd series trucks and the 1500 series trucks in Canada but not on recall in united states. This problem poses a life threatening problem while on the road due to contents of truck possible becoming projectiles to other drivers due to tailgate opening on its own .

Airbag system did not deploy but smoke in cabin during a crash. Video of front, rear and inside cabin shows the rear end passenger side impact at an estimated 45-50 MPH. I saw smoke in cabin, disturbed with anxiety after crash waiting for bags to deploy accidentally. The airbag deployed red light illuminated notifying an airbag deployment. I received a GM message through the vehicle report application stating that my airbag system malfunctioned and I needed to take the vehicle to a service department for repair as soon as possible. This crash was a total loss of the GMC Sierra, this was how hard the vehicle was hit. Why did the airbag system smoke? Why did the airbags not deploy? Why did I receive a Malfunctioning Airbag system message from GMC? Video shows that if the airbag system would have deployed on the steering wheel I would have had less head and neck trauma when whipping backward and then forward.

I was driving 50mph when my check engine light started flashing. The engine had very little power and there was a new consistent engine knock. I took to GMC dealership and they informed me that half of the engine lifters failed and a pushrod was bent. There was no warning prior to the incident. I have had the vehicle serviced only at the dealership and have only used premium fuel. The truck has 88,000 miles.

[XXX], I PURCHASED A 2021 GMC SIERRA 1500 FROM FAULKNER CHEVROLET IN BETHLEHEM, PA. I TEST DROVE THE VEHICLE BEFORE PURCHASE AND IT SHOWED NO INDICATION OF ANY MECHANICAL ISSUES THAT I WAS ABLE TO DETECT. I WAS SHOWN BY THE DEALERSHIP THE CARFAX AND WAS INFORMED THAT THERE ARE CURRENTLY NO RECALLS FOR THE VEHICLE. I WAS LED TO BELIEVE THAT THE VEHICLE WAS IN GOOD CONDITION AND SAFE TO DRIVE AND, THEREFORE, AGREED TO PURCHASE THE VEHICLE FOR THE AFOREMENTIONED PRICE (INCLUDING TAX AND TITLE FEES). I PURCHASED THE VEHICLE WITH 60,077 MILES ON IT, AND AFTER DRIVING IT NORMALLY FOR ONLY 5 DAYS (ON [XXX]) IT BROKE DOWN AND I WAS STRANDED ON THE HIGHWAY 16 HOURS FROM HOME. I WAS ABLE TO GET THE VEHICLE TOWED AND PAID $1,200 FOR THE STARTER TO BE REPLACED, WHICH IS WHAT THE MECHANIC SUGGESTED BUT THIS ENDED UP BEING ENTIRELY UNNECESSARY AS THE REAL ISSUE WAS DUE TO A CATASTROPHIC DEFECT IN THE ENGINE. AFTER THE STARTER WAS REPLACED, I WAS DRIVING THE VEHICLE ONLY A FEW DAYS LATER (ON [XXX]) AND IT SUFFERED A CATASTROPHIC ENGINE FAILURE WHILE DRIVING 70MPH ON THE HIGHWAY. I LOST CONTROL OF THE VEHICLE AND NEARLY GOT IN A COLLISION WITH ANOTHER VEHICLE. I WAS ABLE TO GET THE VEHICLE TO THE NEAREST AUTO SHOP AND AFTER INSPECTING THE VEHICLE THEY INFORMED ME THAT THERE IS A SERIOUS ENGINE ISSUE RELATING TO A SEIZED BEARING AND THE ENGINE WILL NEED TO BE REBUILT ENTIRELY. AT THIS POINT IT HAD BEEN ONLY 12 DAYS SINCE THE PURCHASE AND THE ODEMETER READ 61,662 (1,585 MILES DRIVEN SINCE PURC

I've now had 2 engines fail catastrophically, One at 19,191 miles and the second failure at 80,661. Both are the 6.2L engine. The first had crank bearings that were black. The second I was not informed of the cause but that it was seized leaving me stranded on the roadside.

While driving the vehicle shut off in the middle of the roadway. It sat in the road till it got towed. Brought it to the dealership where it was purchased and they said the engine was blown. Themis vehicle is equipped with the 6.2 motor. It happened February 16th. The dealership confirmed the engine failed. It is siting currently at the dealership and could be available for inspection.

Engine failed and had to be replaced. GMC was absolutely no help had to bring to local gas station where i had to pay almost $12,000 to get it fixed. The truck has been in shop frequently for oil issues with this motor but GMC just jerks you around. I am in sales and need my vehicle to support my family

My Vehicle went into the dealer on January 21, 2025. My initial complaint was tapping noise, I was advised that my vehicle had collapse lifters issue several days later I was informed that they have found metal shards in the lower end and found a bad crank bearing and crank. I was told that the vehicle will need an engine replacement, and that the engine is on back order with no date of fulfilment. My vehicle has 66,700 miles I was advised was out of warranty and that GM will only cover half of the estimated cost of 11,000.00.

The contact owns a 2021 GMC Sierra 1500. The contact stated that the tailgate opened unintendedly while driving, and while the vehicle was parked. The contact stated that the failure had been recurring. The vehicle was taken to the dealer but was not diagnosed or repaired. The contact related the failure to GM Campaign Number: N232426400. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 76,000.

Subject: Complaint Regarding Recurring Engine Failure in 2021 GMC Sierra AT4 Dear National Highway Traffic Safety Administration, I am writing to formally express my concern regarding recurring engine failures in my 2021 GMC Sierra AT4 (6.2L engine). At 23,000 miles, the vehicle suffered a complete breakdown due to failure of cylinder #8, lifters, and push rods. General Motors covered the repairs at that time. However, at 97,000 miles, the exact same issue reoccurred, resulting in significant engine damage. The dealership diagnosed a misfire in cylinder #8, leading to the removal of the right cylinder head, where they found a bent push rod, spun lifter, damaged camshaft lobe, and lifter roller. The repair estimate totals $9,746, but GM has refused to cover the costs, despite us having an extended warranty purchased from the dealership. This recurring failure raises serious concerns about engine reliability and manufacturing defects in General Motors vehicles. I urge the NHTSA to investigate this issue, as multiple GMC and Chevrolet owners have reported similar problems with the 6.2L engine lifter and camshaft system. This is not just a costly repair but a potential safety hazard that GM has failed to properly address. Thank you for your attention to this matter. I appreciate any guidance or action the NHTSA can take to hold GM accountable and ensure consumer protection.

AFM lifters failed which caused cam shaft to collapse under 35k miles. Had to remove while front end to repair

The contact owns a 2021 GMC Sierra 1500. The contact stated while driving at an undisclosed speed, the transmission slammed into gear and the rear wheels locked up. In addition, the vehicle decelerated independently. The vehicle was driven to the shoulder of the road and turned off. The vehicle was restarted, and the contact noticed that the vehicle was independently reset. The vehicle was taken to the dealer where it was diagnosed with a failed wiring harness. The contact was informed that the wiring harness needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 60,129.

The contact owns a 2021 GMC Sierra 1500. The contact stated that while driving at approximately 80 MPH, the vehicle stalled and failed to return to normal operation. No warning light was illuminated. The vehicle was towed to be diagnosed. The contact was informed that the rod bearings needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 134,000.

Wipers work intermittently

The contact owns a 2021 GMC Sierra 1500. The contact stated while driving 55 MPH, the vehicle started making a knocking sound. There were no warning lights illuminated. The contact picked up his son from school and drove the vehicle to the dealer. The contact stated that while depressing the accelerator pedal, the knocking sound became louder, and the vehicle was losing motive power. The vehicle was taken to a dealer and diagnosed with engine failure. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 58,522.

The contact owns a 2021 GMC Sierra 1500. The contact stated that while driving at various speeds up an incline, the vehicle was vibrating and shuddering. The failure persisted over time. There were no warning lights illuminated. The vehicle was taken to the local dealer, but the vehicle was not diagnosed or repaired. The vehicle was taken to a transmission shop, and it was determined that the transmission needed to be replaced. The manufacturer was not contacted. The approximate failure mileage was 68,000.

While driving on the highway the engine 6.2 GM seized suddenly at high speed. The truck shut off completely and left rolling without any control. I had work my way accross lanes to the breakdown lane. While doing so I was almost hit by an 18 wheel trailer truck, who luckily was able to change lanes to avoid hitting me. The reason I was almost hit was because of my low speed since I had now power or acceleration.

The contact owns a 2021 GMC Sierra 1500. The contact stated while driving at various speeds and depressing the accelerator pedal, the vehicle hesitated to respond and shuddered. The vehicle was taken to the dealer, where the fuel tank was cleaned, and the contact added fuel treatment to the fuel, as recommended by the dealer; however, the failure recurred. The contact stated that while driving from a complete stop, uphill, and while driving 50 MPH, the vehicle shuddered and experienced erratic transmission shifting. The check engine warning light was illuminated. The vehicle was taken to Dixie Buick GMC (14565 S Tamiami Trl, Fort Myers, FL 33912); where it was determined that the vehicle was experiencing a abnormal shudder. The dealer replaced the transmission fluid; however, the failure persisted. The contact stated that the failure had become progressively worse and mostly occurred at 1,200 RPM. The dealer was contacted, and an appointment was scheduled for diagnostic testing. The vehicle was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 24V797000 (Power Train); however, the VIN was not included. The manufacturer was notified of the failure. The failure mileage was approximately 8,000.

I purchased a new 2021 GMC Sierra Denali with a 6.2L engine on 03/05/2022. On November 10, 2022, I started the truck, and the engine seized up. The truck had 9018 miles on it and 274 engine hours. The main bearings and possibly the connecting rods bearings was the problem. On January 27, 2023, I finally got a new engine installed in my truck. I had to pay for the repairs.

Driver side lifters collapsed and push rods failed on freeway without warning at 12900 miles on truck.

The contact owns a 2021 GMC Sierra 1500. The contact stated while driving at an undisclosed speed, there was an abnormal clunking sound coming from the rear suspension. The check engine warning light was illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the rear suspension. The vehicle was repaired, but the failure reoccurred 4,000 miles later. The contact stated that while reversing, the contact heard an abnormal clunking sound coming from the rear suspension. The contact also stated that there was also a strong antifreeze odor permeating the interior of the vehicle. The vehicle was taken back to the dealer, but not yet diagnosed. The vehicle was not repaired. The manufacturer was notified of the failure, and a case was opened. The failure mileage was 38,000.

On the morning of 1/19/25, my 2021 GMC Sierra 6.2L AT4 went into limp mode heading south on HWY 207 in Leavenworth, WA at approximately 60 m.p.h. Fortunately, I was able to avoid a rear end collision. I quickly turned the truck off in the middle of the road and restarted it with a CEL. When I returned home almost 180 miles away, my local mechanic diagnosed a code P0303 and cleared it. Since, the truck has continued to shutter at various speeds without throwing a code. It is currently at Haselwood GMC in Bremerton, WA being scanned, recorded, and findings set to GM waiting for resolve. I have notes, exact dates, times, call records, return voice mail messages, and dealership personnel spoken to, etc. The dealer’s lead technician and I were able to replicate the shutter on a road test together on 1/27/25 at 3 p.m. after having driven just 10 miles. During my visit on the morning of 1/30/25, the lead technician stated he has since been able to replicate the shutter seemingly getting worse. I was strongly encouraged by the service manager, service writer, and lead technician their collective “personal recommendation” was to not take the truck back. Haselwood has had the truck since 1/27/25. Still awaiting a response and resolution.

Lifters in the left and right side snapped into 3 pieces. Caused engine failure happened 2 different times. All before 50,000 miles. The first time was before 30,000 miles.

Engine failure

The contact owns a 2021 GMC Sierra 1500. The contact received notification of NHTSA Campaign Number: 24V797000 (Power Train); however, the contact believed that the remedy offered would cripple the vehicle and interfere with his work. The contact works in Alaska and the remedy involved the transmission being limited to fifth gear, preventing the possibility of a wheel lock up condition, which could occur while downshifting from eighth gear. The manufacturer was made aware of the issue and advised the contact to find a dealer that could repair the transmission. The contact had not experienced a failure. Parts distribution disconnect.

The engine locked up with no warning I called the dealership and they said it was out of warranty as it has 77000 miles. upon further investigation I found that the front main bearing on the engine had gone bad and caused the engine to lock up. GMC refused to accept any responsibility for the failure.

We have had several times where we are on highway and our truck like slams on the brakes causing us to lose control. It was a recall on it and GMC fixed it and within the same week of them fixing it it happened 3 times back to back. Making my truck to force another car to steer out of my way and actually went off the highway. Thank god it was just dirt snd he didn’t get hurt or anything. But I am scared to even drive my vehicle! It starting Happening for about a year now. And it would only do it like every couple months but now it’s has done it 6 times in the last 2 months!

Assure Guard (877-831-3077) Contract number [XXX] GMC Customer Care Melissa (866-790-5600 Ext [XXX] ) Case#[XXX] Dealership: Phil Moore GMC (601-956-0150) My truck is barely 4 years old. I should not have this problem . Why is it no one guarantee the product they make? I paid too much money for this vehicle financing it as a new truck. I paid 766.95 to replace/install the shark fan antenna on the roof of my truck because it literally came loose on his own. No one (dealership, GMC, Assure Guard) would assist with repairs. The shark fin antenna started leaking water and it was wobbly where, it was no longer sealed on the body of the truck. Water leaking through out the ceiling/roof. I didn’t do anything to cause this! GMC Customer Care refused to refund nor, help with the cost of repair. I tried to file a claim with my extended warranty company(Assure Guard) contract number [XXX] - they refused to cover the antenna. I have owned several 1500 truck models, and none of them has had the antenna to fall off the vehicle. I had to return to Phil Moore, GMC a second time because they did not properly seal the antenna. This caused the whole interior of my truck to be drenched with rainwater. I am upset with the dealership, GMC and my extended warranty(Assure Guard) because I spent too much money on my vehicle to have this happen and I would like to be refunded. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Engine knocking and metal in oil. Been to the dealership and even though it's under warranty they will not act on it due to no check engine light present. It's making it difficult to trust driving the vehicle anymore because of the thought of the engine shutting down without warning anytime. This complaint is documented and confirmed by a dealership. They made me pay the check out fee and recommended i keep driving the vehicle until the motor locks up.

Transmission, rear wheel lock up issue. Dealer performed recall notice work. Truck still has same issue after dealer visit. When issue starts, feels like you ran over something in the road, All warning lights are on, loss of power to engine and the engine did quit working once. Door locks continue to cycle repeatedly, multiple screen warnings appear on dashboard. It appears that everything that could go wrong happens at once. Have heard transmission valve control modules is a major problem with GM 10 speed transmissions.

I was notified at the dealership that my truck had metal in the oil that is causing the oil sensor pump to send a ln engine code. The fix is a new engine.

Lifter noises, error codes for misfires, lost power

Le Moteur Le 13 décembre 2024 le véhicule arrêté subitement je tente de le redémarrer et ne demarre plus à plusieurs reprises je branche un obd2 et cela indique crank sensor j'envoie le véhicule au dealer et me dise qu'il y a quelque chose dans la base et aujourd'hui ils y est encore Les pneus Certains Flan de pneu de ce véhicule sont fissures tous le tour des roues

The contact owns a 2021 GMC Sierra 1500. The contact stated while driving at approximately 20 MPH, the vehicle lost motive power. The contact stated that the accelerator pedal was depressed; however, the vehicle failed to respond as needed. The contact moved the transmission lever from drive(D) to neutral(N) to reverse(R) several times and was able to drive back to the residence. The contact stated that the check engine warning light was illuminated. The contact had the vehicle towed to a local dealer. The dealer diagnosed the failure and determined that the transmission control valve had failed and needed to be replaced. The vehicle was repaired; however, the contact stated that the failure had reoccurred. The vehicle was taken back to the same dealer who advised that the transmission control valve had failed, but the parts needed to complete the repair were on back-order. The vehicle was not repaired. The contact had asked the dealer what the possibility of the same failure reoccurring after the second replacement of the control valve and the dealer advised that the valve would fail again. The vehicle was awaiting repair. The manufacturer was informed of the failure. The failure mileage was 27,676.

Multiple injector and lifter failures. Occurred on 2 separate occasions. Taken to dealer the first time. Told injector failure and lifter failure. Less than a week later experienced multiple lifter failures. Taken to dealer again for repair. They only replaced some of the affected lifters, even though TSB from GM recommends replacement of all of them. Currently awaiting failure of additional components not replaced. There was no warning of either occurrence. Was only driving 45 mph on my way home the first time. The second occasion was on initial start up at Dr office. Opened a claim with GM on my own, as dealership was negligent or unwilling to contact GMC about these failures, even though I provided them with the appropriate TSB directly from GM.

We had to replace the transmission at 70,000 miles even though problems were reported to the dealer at 53,340. This repair costed $2300 on a 1 year old truck. Then we needed to replace a solenoid circuit which was not covered under warranty. We repaired this 2x (the second time covered). Then at 147,000 miles 9/24, there was a cylinder misfire which bent the push rod and collapsed lifter. This engine repair cost $8300.00 dollars. Who has to replace an engine on a truck that's 3 years old. This is a defect. Please help us. We have spent over $10,000 on repairs. We faithfully do our changes and service.

I got off work started my truck heard a few pops. As I was driving the vehicle started jerking like the brakes were being applied. Then I noticed a yellow engine light and a ESC light come on. I pulled over to check vehicle and all the lights went off. Dealer was just a few miles away. So I started back up and drove to dealer. On the way to dealer vehicle started a tapping noise. Then a new message flashed something about my steering will be affected. I got I to dealer safely. Where I left the truck for repairs.

The control valve system on my 2021 gmc has malfunctioned and this is the second time, currently sitting at Nelson GM Dealer in Fergus Falls MN. I have to drive back to TN as thats where I live and the mechanic said this issue will happen again. This vehicle hasn't had recalls but I believe it was missed since this is the second time with this same issue. This is a GM wide issue as I have researched.

At 8500 miles the engine had lifter go out while I was driving down the highway cause to truck to vibrate and becoming on unsteady causing me to pull over in the middle of traffic. later at 36500 miles it had another lifter go out this time I was driving home at a slower speed but still cause me to have to pull over vert fast as the vehicle became unsteady and vibrated causing all the alarm to come on. Both times the truck was fixed under warranty nut they replaced it with the same parts that are causing the problems. Soon my truck will be off warranty and this will come out of my pocket.