2001 Ford F-250 SD complaints

TL*THE CONTACT OWNS A 2001 FORD F250 SD. THE CONTACT STATED THAT WHILE DRIVING VARIOUS SPEEDS, HE DETECTED THAT THE FRONT PASSENGER SEAT BELT WOULD NOT REMAIN SECURED IN THE LOCKING MECHANISM. WHEN THE SEAT BELT WAS IN USE BY AN OCCUPANT THE FAILURE WOULD OCCUR. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE FAILURE MILEAGE WAS APPROXIMATELY 124,000. UPDATED 01/13/11*LJ UPDATED 01/31/11. *JB

I HAVE EXPERIENCED 2 SPARK PLUG BLOW OUTS ON MY FORD F250 WITH A 5.4L ENGINE LEAVING ME STRANDED OUT OF STATE TWICE. I LIVE IN OHIO AND I HAD MY FIRST SPARK PLUG BLOW OUT IN W VIRGINIA WHILE EN ROUTE TO S CAROLINA FOR VACATION. THE SECOND INCIDENT WAS LAST YEAR IN PENNSYLVANIA. NOW I HAVE ANOTHER PLUG ABOUT TO BLOW OUT! *TR

I OWN A 2001 FORD F 250 SUPER DUTY WITH A 6.8 LITER V10 THIS IS THE SECOND TIME NOW THAT IT HAS BLOWN OUT A SPARKPLUG WHILE DRIVING DOWN THE ROAD AT A HIGH SPEED THEY WERE NOT THE SAME PLUG AND THEY ARE ORIGINAL MOTORCRAFT PLUGS . BOTH TIMES YOU SMELL ALOT OF GAS THAT COULD CAUSE A FIRE. *TR

TL*THE CONTACT OWNS A 2001 FORD F-250 SD. WHILE THE VEHICLE WAS PARKED, THE CONTACT NOTICED THAT THERE WAS A SIGNIFICANT AMOUNT OF OIL LEAKING FROM MULTIPLE LOCATIONS IN THE OIL PAN . THE DEALER WAS CONTACTED AND STATED THAT THE OIL PAN WAS COVERED WITH RUST AND NEEDED TO BE REPLACED. THE VEHICLE WAS REPAIRED AT THE OWNERS EXPENSE. THE FAILURE MILEAGE WAS 157000 AND THE CURRENT MILEAGE WAS 157752.

BRAKE LINE TO THE REAR BRAKES RUPTURED DUE TO EXTREME CORROSION INSIDE THE FRAME THIS FAILURE RESULTED IN THE LOSS OF BRAKING/STOPPING POWER WITHOUT ANY WARNING. THE LINE WAS REPLACED. *TR

FAULTY CYLINDER HEAD ON A 6.8L V-10 2001 F-250. HEAD BLEW AND IT STARTED TO SOUND LIKE A RIDING LAWN MOWER. I AM A 3RD GENERATION FORD OWNER, IF FORD WANTS TO BE FORD TOUGH THEN THEY NEED TO FIX FORD DEFECT NO NEED FOR A TRUCK THAT HASN'T PULLED A HEAVY LOAD TO HAVE SUCH A FUBAR ENGINE DEFECT. MAKES ME WANT TO SWITCH TO FOREIGN TRUCK>. *TR

A REAR BRAKE LINE ON MY 2001 FORD F-250 SUPER DUTY TRUCK RUSTED THROUGH, CAUSING A LOSS OF BRAKE FLUID AND BRAKING ABILITY. I REPLACED THE BRAKE LINE WITH A PART FROM FORD, BUT FORD SEEMED UNINTERESTED IN ADDRESSING THIS FAILURE, WHICH I HAD NEVER HEARD OF HAPPENING BEFORE. I STILL HAVE THE OLD PART. *TR

WHILE DRIVING HOME FROM WORK TODAY DURING A RAIN STORM IN RUSH HOUR (I'M TRAVELING AT 10MPH TOP), MY ENGINE SUDDENLY LOST POWER AND SOUNDED AS IF IT HAD LOST THE MUFFLER, EXCEPT THE SOUND WAS COMING FROM THE ENGINE COMPARTMENT. BECAUSE OF THE RAIN, IT WASN'T AS LOUD AS THE LAST TIME IT HAPPENED THREE YEARS AGO, BUT I KNEW WHAT HAD HAPPENED THANKS TO MY PRIOR EXPERIENCE. I PULLED OVER IMMEDIATELY AND EXITED THE HIGHWAY. ONCE THE RAIN STOPPED, I WAS SURE WHAT HAD HAPPENED. THERE IS NO REASON FOR THIS OCCURRING AT ALL, BUT TO HAVE IT HAPPEN TWICE! THERE IS SERIOUSLY SOMETHING WRONG WITH THE DESIGN IN FORD'S ENGINES (MINE IS A 5.4 V8, F-250.) I SEE ALL THE REPORTS OF THE SAME PROBLEM ON THE INTERNET AND IT MENTIONS THE FACT THAT THERE IS THE POSSIBILITY OF ENGINE COMPARTMENT FIRES. WHEN IT HAPPENED TO ME THE FIRST TIME, I WAS TOLD BY THE DEALERSHIP I SHOULD BE ABLE TO DRIVE IT IN FOR SERVICE, SO I DID. AND I DID SO AGAIN TODAY, TAKING THE BACKROADS. ONLY LATER THIS EVENING, WHILE RESEARCHING THE PROBLEM, DID I DISCOVER THE DANGER. PLEASE APPLY PRESSURE TO FORD TO CORRECT THIS PROBLEM BEFORE SOMEONE IS SERIOUSLY INJURED. AND SINCE THIS IS A COSTLY REPAIR THAT I FEEL IS CAUSED BY POOR DESIGN, IT SHOULD NOT BE PLACED ON THE BURDEN OF FORD CUSTOMERS WHO PAY THOUSANDS OF DOLLARS FOR THEIR VEHICLES IN THE FIRST PLACE. *TR

I WAS IN MY FORD F250 V10 TRITON SITTING IDLE AT A RED LIGHT WHEN I HEARD A LOUD POP UNDER MY HOOD WHICH WAS FOLLOWED BY A STEAM ENGINE SOUND WHEN I ACCELERATED. HAD IT TOWED TO A MECHANIC AND FOUND THAT MY FACTORY SPARK PLUG HAD BLOWN OUT OF THE HEAD. THE MECHANIC TOLD ME THIS HAPPENS OFTEN WITH FORD TRITON MOTORS. THE MECHANIC USED A HELICOIL TYPE TOOLING TO RETAP THE HOLD AND FIT A COLLAR IN IT THAT WOULD ACCEPT A NEW SPARK PLUG. THE COST WAS ABOUT $300 BUT THE FACT THAT THIS HAPPENS SO OFTEN FOR THIS PARTICULAR MANUFACTURER SEEMS TO ME THAT THEY SHOULD BARE THE COST FOR EACH OCCURRENCE. *TR

TL* THE CONTACT OWNS A 2001 FORD F250 SUPER DUTY. THE CONTACT STATED DRIVING AT APPROXIMATELY 40 MPH, THE VEHICLE WOULD NOT ACCELERATE AS HE CONTINUED TO DEPRESS THE ACCELERATOR PEDAL. HE SHIFTED THE VEHICLE INTO NEUTRAL AND BACK INTO DRIVE TO GET THE VEHICLE TO ACCELERATE. THE FAILURE CONTINUED TO PERSIST INTERMITTENTLY. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER WHERE THE CONTACT WAS INFORMED THE ACCELERATOR PEDAL AND THE ACCELERATOR PEDAL SENSORS WOULD NEED TO BE REPLACED. THE VEHICLE WAS IN THE PROCESS OF HAVING THE ACCELERATOR PEDAL AND SENSORS REPLACED. THE VIN WAS UNAVAILABLE. THE FAILURE AND CURRENT MILEAGES WERE 70,000.

I'VE HAD TWO OF THE TIRES GOING 65-70 MPH BASICALLY GO FLAT AND TEAR INTO PIECES AFTER ONLY A FEW SECONDS. BOTH TIMES THERE IS HARDLY NO IDENTIFYING PARTS OF THE TIRE LEFT ON THE RIM. THE LAST TIME I WAS HAULING A 20' TRAILER WHEN IT WENT FLAT AND TORE TO SHREDS. THE FIRST TIME I WAS DRIVING WITH NO TRAILER AND I HEARD IT GO FLAT THEN THE TIRE JUST TORE TO SHREDS ALSO. THESE TIRE ARE ONLY A YEAR OLD. IT DID BEND THE REAR QUARTER PANEL. A EMPLOYEE WAS BEHIND ME AND SAID BASICALLY THE WHOLE TIRE CAME OFF THE RIM AND WENT ACROSS THE MEDIAN OF THE INTERSTATE. *TR

I HAVE A 2001 FORD F250 WITH A 6.8L V10. IT HAS 149,489 MILES ON IT. I AM NO SHADE TREE MECHANIC, I HAVE REBUILT ENGINES, TRANSMISSIONS AND TROUBLE SHOOT CPU?S . I WAS DRIVING DOWN THE ROAD AND CAME TO A TRAFFIC LIGHT THEN MADE A RIGHT HAND TURN. AS SOON AS I MADE THE TURN THE #4 SPARK PLUG BLEW OUT. MY FATHER HAS A 2002 F250 WITH THE 6.8L V10 AND HIS BLEW OUT THE #1 AND ABOUT 300 MILES LATER IT BLEW OUT THE #5 PLUG. IT CAUGHT ON FIRE WHEN IT BLEW OUT THE #5. THIS IS NOT RIGHT!! THERE HAVE BEEN TO MANY COMPLAINTS ABOUT THESE TRUCKS WITH THE SAME PROBLEM. THE CAUSE IS NOT DUE TO INCORRECT TORQUE ON THE PLUG. BUT DUE TO A COMBINATION OF TWO THINGS, 1. THE AMOUNT OF THREADS THAT HOLD THE PLUG IN PLACE.2 THE AMOUNT OF COMPRESSION THAT THE ENGINE PRODUCES. *TR

2001 FORD F-250 SUPER DUTY PICKUP CAUGHT ON FIRE DUE TO FAULTY WIRING. *TR

ROTTING OIL PAN. *TR

FORD F250 WITH A V10 ENGINE. SPARK PLUG BLEW OUT. *TR

MY 2001 F 250 SUPER DUTY PICK UP WITH A 5.4 MOTOR SPIT OUT THE NUMBER 3 SPARK PLUG. IT CAUSED ME TO HAVE MY VEHICLE TOWED, THE # 3 COIL PACT REPLACED ALONG WITH ALL THE SPARK PLUGS AND THE COIL PACT BOOTS. I HEARD A LOUD POP WHICH CAUSED ME TO PULL OVER IMMEDIATELY , IT SOUNDED LIKE A REAL BAD EXHAUST LEAK. I HAVE NEVER HAD ANYTHING LIKE THIS HAPPEN TO ME IN 28 YEARS OF DRIVING AND WORKING ON VEHICLES. THE DEALER HAVE TO PUT IN A HELI COIL AND REPLACE PARTS AS STATED.

I OWN A 2001 FORD F250 SUPER DUTY WITH A 5.4L TRITON V-8 ENGINE, AUTOMATIC TRANSMISSION, 2WD, 137 INCH WHEELBASE, STANDARD EMISSION, WITH NO AFTERMARKET MODIFICATIONS AND APPROXIMATELY 114,000 MILES. I WAS DRIVING AT APPROXIMATELY 60MPH WHEN I HEARD A LOUD BANG FROM UNDER THE HOOD, THE ENGINE LOST POWER AND SOUNDED LIKE THE EXHAUST HAD COME OFF THE ENGINE. UPON INSPECTION, I DISCOVERED THAT THE NUMBER 8 SPARK PLUG HAD BLOWN COMPLETELY OUT OF THE ENGINE AND DAMAGED THE IGNITION COIL. THE THREADS WHERE THE SPARK PLUG SCREW INTO THE HEAD WERE DAMAGED, BUT REPAIRABLE. I REPLACED THE SPARK PLUG AND COIL. EVEN THOUGH THERE WAS NO FIRE OR INJURY IN MY PARTICULAR CASE, THE POSSIBILITY FOR SUCH IS LIKELY IF THIS PROBLEM IS SYSTEMIC. WHEN THE SPARK PLUG BLOWS OUT OF THE CYLINDER HEAD, IT CAN BE DONE WITH A LOT OF FORCE, WHICH COULD CAUSE INJURY/DEATH, DEPENDING UPON THE PROXIMITY OF PEOPLE AT THE TIME. ALSO, WHEN A SPARK PLUG COMES OUT OF THE CYLINDER HEAD, GAS FUMES RELEASED MAY BECOME IGNITED BY SPARKS FROM THE COIL OR SPARK PLUG WIRES, RESULTING IN A ENGINE COMPARTMENT FIRE. THE OLD PARTS ARE AVAILABLE FOR INSPECTION IF NECESSARY. *TR

I HAVE A 2001 FORD F250. I HAVE OWNED IT FOR YEARS. MY STEERING IS REALLY STIFF. I HAVE HAD IT TO 2 FORD DEALERSHIPS & THEY SAY THEY CAN,T FIND ANYTHING WRONG. I KNOW IT IS DANGEROUS BECAUSE I'VE OWNED LOTS OF TRUCKS & NEVER HAD SUCH A PROBLEM. IT IS REAL HARD TO CONTROL AT HIGHER SPEEDS. IT MAKES YOU CONSTANTLY TRYING TO CORRECT LEFT TO RIGHT STEERING. THANK YOU *TR

BRAKE PRESSURE SWITCH.. HARNESS WAS REPLACED IN 2008 BUT THE SWITCH WAS NOT LEAKING AT THAT TIME. CRUISE CONTROL STOP WORKING IN 2009. FOUND SWITCH WAS LEAKING. WAS TOLD NO LONGER UNDER WARRANTY. TW*

THE ENGINE BLEW OUT ANOTHER SPARK PLUG! THIS IS A MAJOR DESIGN DEFECT! FORD SAID THE PLUGS BLOW OUT DUE TO IMPROPER TORQUE OF THE SPARK PLUGS. WHICH IS IMPOSSIBLE SINCE I USED THE FORD REQUIRED TORQUE ON MY SPARK PLUGS AND I USED ANTI SEIZE ON THE PLUGS THREADS! THIS IS A ONGOING PROBLEM! I KNOW A PERSON THAT HAS ONLY 50K ON THERE 5.4 ENGINE AND THE FACTORY INSTALLED PLUGS AND THOSE BLEW OUT TOO!! FORD NEEDS TO RECALL THESE ENGINES AND CORRECT THE PROBLEM. I PULLED BOTH OF THE HEADS OFF MY F-250 AND HAD STAINLESS STEEL THREADED SLEEVES INSTALLED AT THE MACHINE SHOP ! HOPE THIS TAKES CARE OF THE PROBLEM! I DON'T TRUST THE TRUCKS ENGINE DESIGN FOR A LONG TRIP OR EVEN TAKE IT ON VACATION! I AM WORRIED THE SPARK PLUGS WILL BLOW OUT WHILE I AM ON THE HIGHWAY OR OUT OFF TOWN! PLEASE HELP US TO GET FORD TO RECALL THIS PROBLEM AS SOON AS POSSIBLE PLEASE!!!!! I HAVE HAD 3 OTHER PLUGS BLOW OUT BEFORE THIS ! TO DO THIS TYPE OF REPAIR IS VERY EXPENSIVE AND UNNECESSARY! BUT MUST BE DONE TO FIX THE PROBLEM I HOPE! THIS IS A MAJOR DESIGN DEFECT AND FORD SHOULD BE MADE TO CORRECT IT! WE PAID HARD EARNED MONEY FOR THESE VEHICLES AND SHOULD NOT HAVE TO DEAL WITH THIS TYPE OF REPAIR OVER AND OVER !! I'LL NEVER BUY ANOTHER FORD IF FORD DOES NOTHING REGARDING THE SPARK PLUGS! I AM A CERTIFIED MECHANIC AND I HAVE NEVER SEEN ANY OTHER TYPE OF ENGINE HAVE THIS PROBLEM ! PLEASE HELP ! THIS PROBLEM IS NOT EVEN COVERED UNDER THE EXTENDED WARRANTY !!! THIS IS VERY BAD FOR FORD!!! THEY HAVE NICE VEHICLES

I WAS DRIVING HOME FRIDAY JANUARY8TH AT 7:30 PM WHEN MY SPARK PLUG BLEW OUT OF MOTOR WHILE DRIVING, SHOOTING FUEL OUT OF CYLINDER AS COIL WAS STILL CONNECTED AND ARCING ON MOTOR.I LOST POWER AND HAD TO GET TO SIDE OF ROAD I COULD NOT FIX BECAUSE THREADS OF CYLINDER HEAD WERE DAMAGED WHEN BLOWOUT OCCURRED.FORTUNATLY THIS HAPPENED WITHIN A COUPLE MILE OF MY HOME, IF THIS WERE TO OCCUR ON HIGHWAY WITH TRAFFIC AROUND THE LOSS OF POWER AND POTENTIAL FOR FIRE WOULD HAVE BEEN VERY DANGEROUS! *TR

I WAS ON A DELIVERY WITH MY 2001 FORD F 250 V10 WITH 8 THOUSAND MILES, WHEN I HEARD WHAT I THOUGHT WAS TAPPET NOISE THEN I HEARD A POP AND THEN REALY LOUD EXHAUST NOISE LIKE I LOST A EXHAUST MANIFOLD SEAL, I PULLED OVER TO FIND I HAD A SUDDDEN SPARK PLUG BLOW OUT, I WAS ON A DELIVERY AND WORK IN THE HOLLYWOOD ANDTHE PRODUCTION NEEDED ME AT LOCATION ON TIME, SO I DROVE IT THERE AFTER I ISOLATED T HE SPARK PLUG WIRE FROM GROUNDING BY FLOATING IT IN AIR BY PURRING IT THREW THE OIL DIP STICK, I DROVE ON WITH THE 9 REMAINING CYLINDERS AND MADE MY DELIVERY, I WAS OUT 250 MILES AND HAD TO RETURN TO LA FOR A CHILD CUSTODY HEARING SO I DROVE IT BACK THE WHOLE WAY SOUNDING LIKE A TUG BOAT, IT WAS LIKE I WAS LINDBERG CROSSING THE ATLANTIC I DID NOT KNOW IF I WOULD MAKE IT, BUT I DID, I CALLED FORD AND THEY WANT 700 TO RE TAP THE HOLE AND PUT A INSERT IN, I LOOKED AT THE CONSUMER COMPLAINTS AND SEE HUNDREDS OF PEOPLE HAVE HAD THE SAME ISSUE, I THINK FORD SHOULD RECALL THE ENGINES AND FIX THE THREAD ISSUE. *TR

2001 FORD F-250 SD 6.8L V-10, SPARK PLUG ON THE NUMBER EIGHT CYLINDER BLEW OUT OF THE HEAD WHILE DRIVING AT APPROX. 15-20 MPH. THE THREADS ON THE CYLINDER HEAD ARE NON-EXISTENT AT THIS POINT, THE COIL WAS DESTROYED, AND THE VEHICLE IS UNDRIVABLE. AFTER RESEARCHING, I HAVE FOUND THIS TO BE A KNOWN PROBLEM ON SEVERAL MODELS FROM FORD. THE VEHICLE IS CURRENTLY AWAITING INSPECTION AND REPAIR BY A LOCAL FORD DEALERSHIP. I HAVE BEEN TOLD BY THE SERVICE WRITER THAT IT IS A KNOWN PROBLEM, BUT THAT FORD WILL NOT PROVIDE A COVERED REPAIR. I HAVE BEEN TOLD THAT IF THE HEAD IS REPAIRABLE WITHOUT REMOVAL FROM THE VEHICLE, THE COST WILL BE APPROX. $750.00 WITH NO GUARANTEE THAT IT WILL NOT RE-OCCUR. IF THE CYLINDER HEAD MUST BE REMOVED, THE COST IS BETWEEN THREE AND FOUR THOUSAND DOLLARS. I WILL BE RETAINING THE OLD PARTS. *TR

FORD F250 TRYTON V-8 BLOWN PLUGS ON INTERSTATE 80 MILES FROM HOME. FORD DEALER SAYS THE JUST ISSUED A SERVICE BULLETIN CONCERNING THIS BUT ARE OF NO HELP. THE HEADS MUST BE REMOVED AND REPAIRED WITH HELICOIL KITS @ UPWARDS OF 800.00 OR MORE. PLEASE REQUIRE A RECALL !!!!! *TR

I HAVE A 2001 FORD F250 SD CREW/4X4 AND THERE IS SOMETHING WRONG WITH THE FRONT END STEERING SYSTEM. TODAY WAS THE SECOND TIME THAT MY TRUCK BEGAN TO SHIMMY AND SHAKE SO HARD THAT AT 55MPH BY THE TIME I GOT THE TRUCK SLOWED TO ABOUT 15MPH I WAS OVER INTO THE LANE OF THE ON COMING TRAFFIC (LUCKLY NO ONE WAS THERE). THE OTHER DAY WITH MY WIFE IN THE TRUCK WE TURNED A CORNER AND THE TRUCK STARTED TO SHIMMY REALLY HARD AND I LOST SOME RESPONSE CONTROL OF THE TRUCK THE STEERING BECAME SOMEWHAT UNRESPONSIVE, AND I WAS FORCED TO ALLOW THE TRUCK TO TRACK INTO THE BAILY POST OFFICE PARKING LOT. SOMETHING IS WRONG WITH MY TRUCK BUT THE MECHANICS TELL ME THAT THERE IS NOTHING WRONG WITH IT THAT THEY CAN FIND. THE TRUCK DOES NOT DO THIS ALL THE TIME, IT COMES AND GOES, SOMETIMES IT HAPPENS ALMOST EVERY TIME I DRIVE IT AND THEN IT CAN GO WEEKS WITHOUT HAPPENING. I WORKED AS A MECHANIC FOR 25 YEARS AND I AM TELLING YOU THIS IS A VERY DANGEROUS PROBLEM WITH THIS TRUCK AND I KNOW THAT YOU HAVE RECEIVED HUNDREDS MAYBE EVEN THOUSANDS OF COMPLAINTS ABOUT THIS SAME PROBLEM WITH THE FORD F-SERIES TRUCKS AND FORD SHOULD BE HELD ACCOUNTABLE FOR SUCH A BAD DESIGN FLAW THAT CAN CAUSES A LIGHT SHIMMY TO TOTAL LOSS OF CONTROL OF THESE TRUCKS AT ANY TIME WHILE DRIVING, WHICH MAY CAUSE SERIOUS HARM OR EVEN DEATH TO THE OWNER. MY WIFE WILL NOT EVEN RIDE IN THE TRUCK ANY MORE BECAUSE SHE IS TOO SCARED TO DO SO. THANK YOU FOR TIME AND CONSIDERATION. GARY *TR

I OWN A 2001 FORD F-250 PICK UP WITH A 5.4 LITER ENGINE. THE SPARK PLUG BLEW OUT THE FIRST TIME IN THE SUMMER OF 2008. THEN AGAIN IN AUGUST OF 2009. THE FIRST TIME IT WAS REPAIRED WITH THE HELICOIL REPAIR KIT AS SUGGESTED BY FORD. THIS TIME, THERE WAS NO OPTION BUT REPLACING THE HEAD OR THE ENTIRE ENGINE. THIS IS A SERIOUS AND VERY EXPENSIVE PROBLEM. AND SEEMS TO BE TOO COMMON. AFTER SOME RESEARCH OVER 17,000 VEHICLES HAVE HAD THIS SAME PROBLEM, I BELIEVE THIS IS A GOOD REASON TO RECALL THESE VEHICLES. THIS IS RIDICULOUS. FORD IS OF NO HELP ON WHAT TO DO THE SECOND TIME THIS HAPPENS BUT THEY WILL THROW A $3000.00 REPAIR BILL AT YOU. *TR

6 MONTHS AGO MY FORD F-250 SUPER DUTY CREW CAB V-10 BLEW OUT THE 3RD SPARK PLUG BACK ON THE PASSENGER'S SIDE. AFTER READING ABOUT MANY OTHER PEOPLE HAVING THE SAME PROBLEM I WENT TO MY FORD DEALER WHO TOLD ME IT HAPPENS ON THESE ENGINES BUT THERE ISN'T ANY RECALL NOR WOULD THEY PAY FOR THE REPAIR. TODAY THE SECOND PLUG BACK ON THE PASSENGER SIDE BLEW OUT. I SMELLED A STRONG GAS ODOR AND FEEL LUCKY NOT TO HAVE HAD A FIRE EITHER TIME. NOW DO I HAVE FORD REPAIR THIS ONE AND JUST WAIT FOR THE OTHER 8 TO BLOW? FORD NEEDS TO RESOLVE THIS ISSUE! *TR

THERE HAVE BEEN NO INCIDENTS/ACCIDENTS, HOWEVER PROBLEM IS: 2001 FORD F250 SUPER DUTY PICKUP TRUCK - OWNER'S GUIDE / MANUAL STATES ON PAGE117 UNDER THE HEADING "TETHER ANCHORAGE HARDWARE" -- (TETHER ANCHORAGE HARDWARE KITS (PART NUMBER 613D74) INCLUDING INSTRUCTIONS, MAY BE OBTAINED AT NO CHARGE FROM ANY FORD OR LINCOLN/MERCURY DEALER) PER AUTOMOTIVE DEALERSHIP, PART NUMBER IS NOW OBSOLETE; HAVE INVESTIGATED AND FOUND UPDATED PART # F81Z5613D74AA. FORD CUSTOMER SERVICE PHONE TOLD ME TO CALL THE DEALER; DEALER SAID PART IS APPROXIMATELY $80.00; CALLED FORD CUSTOMER SERVICE BACK - THEY TOLD ME TO CALL THE SERVICE MANAGER AT THE DEALER TO SEE IF THEY COULD HELP. FORD DID NOT HAVE RESPONSIBILITY. BASICLY I WAS TOLD TO PAY FOR IT OR WHO CARES? SO FAR INCLUDING THIS LETTER I NOW HAVE 2+ HOURS INVESTED INTO THIS ISSUE. UNFORTURNATELY, MOST PEOPLE WOULD NOT TAKE THE TIME AND THIS IS WHY THESE ISSUES EXIST IN THE FIRST PLACE. THIS SHOULD HAVE BEEN TAKEN CARE OF IN 1-2 PHONE CALLS. CONSEQUENCES COULD MEAN DEATH OF A CHILD DUE TO THE CHILD RESTRAINT SEAT NOT FASTENED INTO VEHICLE PROPERLY. ALSO, IF INFORMATION ONLINE IS ACCURATE, I'M NOT THE ONLY ONE WHO HAS EXPERIENCED PROBLEMS WITH THIS TYPE OF QUESTION / ISSUE. PLEASE LOOK INTO THIS AND HOLD THESE MANUFACTURES ACCOUNTABLE TO KEEP OUR CHILDREN SAFE! *TR

SEPT. 07; MY FORD 01 F250T. CAB 4+4 WITH THE 5.4 L TRITON MOTOR, BLEW OUT OF THE ENGINE CYLINDER HEAD ITS FIRST OF 3 SPARK PLUGS, ON JULY 4TH 09 IT BLEW OUT 2 MORE; I HAD JUST GOTTEN ONE FIXED AND PICKED UP MY TRUCK AND DID NOT MAKE IT OUT OF THE PARKING LOT. WHEN THE FIRST ONE BLEW I WAS COMING DOWN A STEEP HILL WITH A POP-UP TRAILER IN TOW, I HAD MY FAMILY WITH ME, WIFE AND 2 GIRLS AGE 6 AND 8. WHEN IT BLEW IT SOUNDED LIKE A CANNON UNDER THE HOOD, I ALMOST LOST CONTROL, AFTER A 4 HR. WAIT FOR A TOW TRUCK AND A COUPLE DAYS AT THE DEALER, AND 600.00 LATER, I GOT MY TRUCK BACK, NO FURTHER PROBLEMS TIL 7-4-09 WHEN 2 MORE BLEW.. I HAVE WENT ONLINE AND THERE ARE SEVERAL STORIES ABOUT THIS HAPPENING TO THIS MOTOR AND TWO OTHER MODELS, AGES BETWEEN '99 AND '04. THE PROBLEM IS THAT FORD ENGINEERS DID NOT PUT ENOUGH THREADS IN THEIR "ALUMINUM HEAD" ONLY 3 THREADS AND THE SPARK PLUG HAS ABOUT 12. THE OTHER THING THAT HAPPENS WHEN THE SPARK PLUG BLOWS OUT IT TAKES THE COIL PACK WHICH IS MOUNTED DIRECTLY ABOVE THE PLUG ANOTHER 100.00 TO THE EQUATION. I TALKED TO FORD BUT THEY DO NOT CARE, THEY WOULD NOT EVEN HELP ME OUT WITH THE LABOR TO FIX THE PROBLEM WHICH ENTAILS DRILLING OUT ALL THE REMAINING CYLINDERS AND INSERTING HELI-COILS, AT THE TUNE OF 1350.00 AT THE DEALER. THIS IS A VERY PREVALENT PROBLEM, AND I CAN NOT BELIEVE THERE HAS NOT BEEN A RE-CALL.... *TR

WE HAVE A F250 2001 V10 PICKUP THAT HAS HAD 2 SPARK PLUG EJECTION FROM THE DRIVERS SIDE HEAD OF THE ENGINE. THIS WE WERE TOLD BY THE MECHANICS AT OUR LOCAL FORD DEALER SHOP AT OUR 2 DIFF FORD DEALERS IS INHERENT IN ALL TRITON MOTORS. THIS HEAD PROBLEM SHOULD BE AA SAFETY RECALL. WHEN THE SECOND ONE HAPPENED WE WERE 200 MILES FROM HOME AND HAD TO SMELL GAS FUMES FOR 200 MILES TO GET IT BACK TO THE DEALER TO GET IT REPAIRED. LUCKILY THE SPARK PLUG HAD BEEN EJECTED FROM THE COIL ASSEMBLY IF IT HAD STAYED ON IT WOULD HAVE STARTED A FIRE. THERE IS A SERIOUS DEFECT IN THE CYLINDER HEAD AND FROM THE MANY MECHANICS THAT I HAVE SPOKEN TO THEY ALL STATE IT IS FROM ONLY 2 OR 3 THREADS PER SPARK PLUG HOLDING THE PLUGS IN PLACE. PLEASE RECALL ALL TRITION MOTORS TO HAVE THIS TAKEN CARE OF. *TR

TL*THE CONTACT OWNS A 2001 FORD F250 SUPER DUTY. THE CONTACT STATED THAT THE MODULE THAT CONTROLS THE FUEL INJECTORS HAS FAILED. THE MANUFACTURER STATED THAT THEY NEEDED TO BE REPLACED. THE VEHICLE HAS EXPERIENCED MAJOR ISSUES WITH THE CAMSHAFT SENSOR AND THE MANUFACTURER WILL NOT ASSIST. THE FAILURE MILEAGE WAS 60,174.

MY 2001 F250 WITH 5.4L TRITON ENGINE HAS BLOWN OUT 4 SPARK PLUGS OVER THE LAST YEAR. EACH REPAIR HAS BEEN AROUND $600. THIS HAS TO BE A DEFECT. FORD DIDN'T ADVISE ME THAT THIS WAS A COMMON ISSUE. HAD I KNOWN, I WOULD HAVE PUT IN A DIFFERENT MOTOR OR HEADS AS I HAVE SPENT THAT MUCH IN REPAIRS AND TOWING. *TR

SPARK PLUG BLEW OUT OF MY 6.8L V-10 FORD F-250. CAUSED EXTENSIVE DAMAGE AND SMALL FIRE. *TR

IN LATE DECEMBER 2008 I HAD ALL MY SPARK PLUGS REPLACED BY 1ST CHOICE AUTOMOTIVE. BY THE END OF JANUARY 2009 ONE OF THE SPARKS PLUGS SHOT OUT OF THE ENGINE. THEY CAME AND TOWED MY TRUCK TO THEIR SHOP AND PUT IN A HELICOIL. ONCE AGAIN AT BEGINNING OF MARCH THE SAME SPARK PLUG SHOT OUT. THE SHOP TELLS ME THAT FORD HAS A SERVICE BULLETIN ON IT. THE BULLETIN SAYS TO REPLACE THE CYLINDER HEAD. I CALLED AL PACKER FORD TO CONFIRM WHAT FIRST CHOICE AUTOMOTIVE. THEY SAID FORD DOES HAVE A SERVICE BULLETIN ON THIS DEFECT AND AGREED ALONG WITH THE SHOP THAT I SHOULD REPLACE MY CYLINDER HEAD. I FEEL THAT IF FORD KNOWS THAT THEY ARE HAVING A PROBLEM WITH THESE CYLINDER HEADS THEN THEY SHOULD REPAIR IT. I SHOULD NOT HAVE TO PAY TO FIX A PROBLEM THAT THEY ALREADY KNOW ABOUT. ANY HELP YOU CAN GIVE IS APPRECIATED. *TR

MY FORD TRUCK STARTED MAKING A CLICKING NOISE FROM THE ENGINE COMPARTMENT. THEN APPROXIMATELY 2 WEEKS LATER WHILE DRIVING DOWN THE HIGHWAY AT 65MPH THERE WAS A LOUD POP AND THEN A LOUD EXHAUST SOUND. THE ENGINE THREW THE NUMBER 3 SPARK PLUG ON THE PASSENGER SIDE. IT WAS FIXED WITH AN INSERT BUT BLEW THE INSERT OUT A MONTH LATER. HAS NOT BEEN FIXED YET AFTER THE SECOND ONE. *TR

I HAVE A 2001 FORD F250, THE WINDSHIELD LEAKED CAUSING THE GEM MODULE TO MAL-FUNCTION. THIS IS A PROBLEM IN ALOT OF FORD VEHICLES,NOT JUST MINE. THE SHORT CAUSES THE TRUCK TO MISS, STALL, A LOT OF ELECTRICAL PROBLEMS RESULT. *TR

I JUST FOUND OUT THAT MY 2001 F-250'S CRUISE CONTROL WAS NEVER REPLACED JUST DISCONNECTED,I ONLY FOUND OUT AFTER I TOOK IT TO AN INDEPENDENT REPAIR TO REPAIR A BRAKE PROBLEM. BECAUSE MY BRAKE SYSTEM LOST PRESSURE. THE ORIGINAL FORD SOLUTION OF DISCONNECTING THE CRUISE CONTROL FIXES ONE PROBLEM BUT THAT SAME FAULTY PART IS STILL POSES DANGER. I TOOK MY TRUCK TO FORD A THERE REPORT SHOWED NO RECALL NOTICE SHOWING AND THEY TOLD ME IT WOULD BE $103 TO REPLACE THE PART, OF COURSE I PAID IT, IT WOULD BE TO DANGEROUS NOT TOO. THE DEALER TOLD ME I SHOULD CALL FORD CUSTOMER COMPLAINT DEPT TO TRY AND GET MY MONEY BACK. BUT THE REAL ISSUE IS THAT MANY PEOPLE THAT THINK THEY CAN LIVE WITH FORD'S FIRST SOLUTION, WITHOUT CRUISE CONTROL. THINK AGAIN ABOUT SUDDENLY LOSING BRAKE PRESSURE. *TR

TL*THE CONTACT OWNS A 2001 FORD F250 SUPER DUTY. THE CONTACT STATED THAT HIS CRUISE CONTROL SWITCH WAS RECALLED. HE TOOK THE VEHICLE TO BE REPAIRED ACCORDING TO THE RECALL. THE DEALER STATED THAT THE CRUISE CONTROL WAS DISCONNECTED AND PREVIOUSLY REPLACED; THEREFORE, FORD WOULD NOT PAY FOR IT AGAIN. THE CONTACT STATED THAT THE CRUISE CONTROL WAS NEVER PREVIOUSLY REPAIRED. HE TOOK THE VEHICLE TO ANOTHER DEALER, BUT THEY ALSO DID NOT WANT TO MAKE THE REPAIRS. THE FAILURE MILEAGE WAS 95,638.

WHEN I STARTED MY VEHICLE THE #1 PLUG EJECTED FROM MY FORD 5.4 ENGINE. THE PLUG BROKE THE COIL AND STRUCK THE FUEL RAIL PUTTING A DENT IN IT AND PARTIALLY DISLODGE IT. THIS IS MY FIRST EJECTION. MY SHOP REPLACED THE THREADS IN THE HEAD, INSTALLED A NEW SPARK PLUG AND COIL, THEN THEY STRAIGHTEN UP EVERYTHING. I AM NOW SCARED TO DRIVE IT AS I AM 70 YEARS OLD AND HAD PLANNED TO TRAVEL. *TR

2001 FORD F250 SUPER DUTY PICKUP. POWER DOOR LOCKS ARE BOTH FAILING. UNABLE TO OPEN DOORS WITH OUT PULLING UP LOCK MANUALLY INSIDE TRUCK. COULD BE SAFETY HAZARD DURING AN ACCIDENT. FORD WILL ONLY REPLACE FOR $400. THE TRUCK IS ONLY 7 YEARS OLD. THIS SEEMS TO EARLY FOR LOCK ACTUATORS TO FAIL. HAVE READ OF MANY FORD OWNERS COMPLAINING OF SIMILAR FAILURES ON FORD WEBITES. *TR

TRUCK HAD BEEN PARKED IN MY DRIVEWAY APPROXIMATELY 30 MINUTES WHEN I HEARD A NOISE LOOKED OUT AND FRONT OF TRUCK WAS ENGULFED IN FLAMES. NO PRIOR WARNING WAS GIVEN OR NOTICED. CALLED 911, FIRE DEPARTMENT ARRIVED AND EXTINGUISH THE FLAMES. TRUCK WAS TOTALED. *TR

TL*THE CONTACT OWNS A 2001 FORD F-250 SD. WHEN THE GEAR SHIFTER IS USED, IT CAUSES THE ACCELERATOR PEDAL FUSE TO BLOW. SMOKE APPEARED OUT OF THE STEERING COLUMN. THE CONTACT BELIEVES THAT THE FAILURE WAS DUE TO BURNED WIRES AND ALL OF THE ISSUES WERE CONNECTED TO THE STEERING COLUMN ELECTRICAL SYSTEM. HE BELIEVES THAT THE WIRES WERE BURNED IN THE STEERING COLUMN. THE TOW PACKAGE BURNED AND THE RIGHT TURN SIGNAL AND BRAKE LIGHTS NO LONGER WORK. ALL OF THE DOORS APPEARED TO BE SHORT AND DO NOT CLOSE OR OPEN PROPERLY. IN ADDITION, THE OVERDRIVE FAILED ON THE STEERING COLUMN. WHEN THE CONTACT PRESSES THE BUTTON, NOTHING HAPPENS. THE DEALER STATED THAT THE VEHICLE WAS NOT UNDER WARRANTY AND DOES NOT HAVE ANY SAFETY RECALLS THAT APPLY TO THE VIN. THE CONTACT WOULD BE RESPONSIBLE FOR THE REPAIR COSTS. THE FAILURE MILEAGE WAS 142,000.

ON SUNDAY, AUGUST 14, 2008 I WAS DRIVING MY 2001 FORD F-250 WITH A 5.4 LITER ENGINE AND I HEARD A LOUD POP WHICH WAS FOLLOWED BY A LOSS OF POWER AND A NOISE THAT SOUNDED LIKE A LARGE EXHAUST LEAK. WHEN I OPENED THE HOOD I NOTICED ONE OF THE SPARK PLUGS HAD BLOWN OUT OF THE HEAD AND HAD BROKEN THE COIL, RIPPED THE SPARK PLUG BOOT AND STRIPPED THE HEAD. THIS IS THE SECOND TIME IN 1 1/2 YEARS THAT I HAVE HAD A SPARK PLUG BLOW OUT OF THE HEAD. (THESE WERE TWO DIFFERENT SPARK PLUGS). THIS IS A COSTLY REPAIR AND MANY OTHERS HAVE HAD THE SAME PROBLEM. I CONTACTED FORD AND THEY TOLD ME THERE WAS NOTHING THEY COULD DO TO HELP ME AND THEN TRIED TO SELL ME A NEW VEHICLE INSTEAD OF FIXING THE ONE I HAVE. *TR

I HAVE A 2001 FORD F-250 WITH THE TRITON 5.4L V8. THE PROBLEM I HAVE IS THE SPARK PLUGS BLOWING OUT I HAVE HAD 3 TOTAL SENSE MARCH. THE FIRST ONE HAPPENED AT ABOUT 120,000 MILES IN MARCH THERE IS A SLIGHT "TICKING" NOISE THAT COMES FROM THE ENGINE THEN THE BOOM FROM THE SPARK PLUG BLOWING OUT WITH A SUDDEN LOSS OF POWER. THE 1ST TO GO WAS THE NUMBER 7CYLINDER FOLLOWED BY NUMBER 1 AND FINALLY NUMBER 3 CYLINDERS. THE SECOND AND THIRD HAPPENED ABOUT 200 MILES FROM EACH OTHER AT THE 143,000 MILE MARK THIS WEEKEND. FRIDAY AUGUST 29 THE SECOND ONE BLEW OUT ON THE INTERSTATE GOING NORMAL SPEED WITH NO INDICATION OF A PROBLEM. THE TRUCK WAS TOWED TO WADE FORD IN SMYRNA TO BE REPAIRED. THE TRUCK WAS REPAIRED WITH IN SEVERAL HOURS AND I WAS ON THE ROAD AGAIN $750 LATER. I WAS HEADED TO FLORIDA AT THE TIME AND STILL MADE THE TRIP. ON SUNDAY THE 31ST THE THIRD PLUG BLEW OUT LEAVING ME ON THE SIDE OF THE ROAD IN ALABAMA, AGAIN WITH NO INDICATION OF A PROBLEM. THIS SEEMS TO BE A REPETITIVE PROBLEM THAT I HAVE HAD, THE TRUCK HAS NOT BEEN ABUSED AND HAS HAD REGULAR MAINTENANCE. THE ENGINE HAS NEVER BEEN STRESSED OR STRAINED AS TENDS TO HAPPEN WITH SUPERDUTY TRUCKS. I HAVE READ A LOT ON THE INTERNET OF THE PROBLEM AFFECTING MANY OTHERS AROUND THE COUNTRY,MANY WITH THE SAME ORDER OF PLUGS "BLOWING-OUT". THE DEALERSHIP DOES NOT SEEM TO RECOGNIZE THE PROBLEM, AND SAY THEY HAVE NEVER SEEN IT HAPPEN. THIS IS A FORD PROBLEM THAT THEY ARE NOT DONG ANYTHING ABOUT. ITS A COSTLY PROBLEM FOR THE OWNERS

SOUNDED LIKE MANIFOLD LEAK SPARK PLUG EJECTION. *TR

I HAVE A 2001 FORD F250 SUPER DUTY TRUCK WITH THE 7.3L DIESEL ENGINE, I HAD TO HAVE THE CAMSHAFT SENSOR REPLACED AT MY OWN EXPENSE AT THE LOCAL FORD DEALERSHIP AT A COST OF NEARLY $1,100.00. WHEN THE RECALL NOTICE CAME IN THE MAIL, I CALLED AND MADE APPOINTMENT TO HAVE IT CHECKED AND SURE ENOUGH THE NEW CAMSHAFT SENSOR WAS THE CORRECT ONE. THE FORD MOTOR COMPANY DEALER ONLY ISSUED ME A $300.00 REFUND. WHAT IS RIGHT ABOUT THAT. *TR

I WAS DRIVING ON A 2-LANE STATE HIGHWAY AT APPROXIMATELY 65MPH. MY PICKUP IS A 2001 FORD SUPERDUTY DIESEL SUPERCAB 4X4. THE WEATHER WAS OVERCAST, TEMPERATURE ABOUT 75 DEGREES. I WAS PULLING AN 18' FLATBED "CAR HAULER" TYPE TRAILER, TOTAL WEIGHT (TRAILER & LOAD) APPROXIMATELY 1,000LBS. I HAD DRIVEN 60 MILES WITH NO INDICATION OF VIBRATION OR PROBLEMS. I STOPPED FOR AN HOUR THEN RESUMED DRIVING. I NOTICED SOME VIBRATION, SO STOPPED AND CHECKED BOTH PICKUP AND TRAILER TIRES. INFLATION WAS GOOD AND THERE WERE NO INDICATIONS OF PROBLEMS WITH ANY TIRES. I CONTINUED MY TRIP. WITHIN THE NEXT 5 MILES THE TREAD SEPARATED FROM THE LEFT FRONT (DRIVERS SIDE) TIRE ON MY PICKUP. THE PICKUP IMMEDIATELY LURCHED TO THE LEFT ACROSS THE CENTERLINE. I REGAINED CONTROL AND WAS ABLE TO PULL OFF THE SHOULDER WITHOUT FURTHER INCIDENT. THE TREAD SEPARATION DAMAGED THE FENDER, RUNNING BOARD, INNER FENDER, INSULATION LINER, AND FRONT BUMPER. THERE WERE NO PERSONS INJURED. I WAS ABLE TO "TIE-WRAP" THE INNER FENDER PANEL BACK IN PLACE AND INSTALL THE SPARE TIRE TO CONTINUE THE TRIP. *TR

PIN SIZE HOLE IN RIGHT SIDE OF ENGINE BLOCK. *TR

NOTHING LEAD UP TO THIS. I JUST SOLD MY 2001 F250 XLT TO A FRIEND. WITHIN DAYS THE TRUCK STARTED SHAKING VIOLENTLY WHEN THEY WOULD REACH A SPEED AROUND 40MPH. THEY HAVE TAKEN IT TO A MECHANIC AND HE SPENT DAYS LOOKING AT IT AND CAN NOT FIND A PROBLEM. ITS BAD ENOUGH THAT IT ALMOST CAUSED THEM TO RUN OFF THE ROAD. TRUCK HAD TO BE PARKED ON THE SIDE OF THE ROAD!! *TR

I WAS DRIVING MY 2001 F250 FORD TRUCK AND PULLING A TRAILER. I WAS TRAVELING AT A SPEED OF 60 MPH ON A TWO- LANE HWY. I HAD JUST CHECKED ALL THE TIRES FOR CORRECT AIR PRESSURE BEFORE LEAVING HOME SINCE I WAS TAKING A LOAD OF PIGS TO MARKET. WITHOUT WARNING, SUDDENLY I WAS IN AN UNCONTROLLABLE JERK LEFT INTO THE ONCOMING LANE. FORTUNATELY, I WAS ABLE TO GAIN CONTROL JUST IN TIME TO AVOID A HEAD-ON COLLISION AS MY TRUCK WENT INTO THE DITCH AND STOPPED. THE COMPLETE OUTER LAYER OF RUBBER CAME OFF MY LEFT FRONT TIRE AND WRAPPED ITSELF AROUND THE INSIDE DISC BRAKE/AXLE ASSEMBLY AND TORE OFF ALL OF THE BRAKE LINES FROM THEIR MOORING LEADING TO THE LEFT FRONT BRAKE. (I ONLY HAVE 23,400 MILES ON THIS TRUCK AND HAVE HAD NO OTHER TIRE INCIDENTS). I HAD TO REMOVE THE TIRE WHICH STAYED INFLATED MINUS ITS COMPLETE OUTER SHELL IN ORDER TO ENTANGLE AND REMOVE THE OUTER SHELL PORTION OF THE TIRE FROM THE BRAKE/AXLE ASSEMBLY. THE MAIN STEEL BRAKE LINE WAS NOT BROKEN AS WERE OTHER RUBBER LINES TO THE BRAKE ASSY. I AM AWAITING AN EVALUATION FROM FORD ON THE FRONT LEFT WHEEL ALIGNMENT AND BRAKE ASSEMBLY/LINES CONDITION. FORD HAD NO RECALL ON THE TIRES AND AT FIRST FIRESTONE SERVICE MANAGER PROMISED TO REPLACE ALL OF MY TIRES FREE OF CHARGE BECAUSE THERE WAS A RECALL ON THAT FIRESTONE TIRE. THE NEXT DAY, ONCE THEY REPLACED THE TIRES THEY CAME IN AND ADVISED ME THAT THE RECALL DID NOT MATCH THE SERIAL NUMBER ON MY TIRES AND TOLD ME THEN THAT I WOULD HAVE TO PAY FOR THE REPLACEMENT. TO COMPENSATE M