2001 Daewoo Nubira

Defect. ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.

Risk. THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.

Remedy. DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. OWNERS SHOULD CONTACT DAEWOO PUERTO RICO AT 1-877-362-1234 OPTION 6.

Defect. ON CERTAIN PASSENGER VEHICLES, THE CAMSHAFT POSITION SENSOR MAY MELT RESULTING IN A BURNING SMELL AND VISIBLE SMOKE, WHICH MAY SUBSEQUENTLY LEAD TO THE MELTING OF THE CAMSHAFT COVER AND THE CAMSHAFT POSITION SENSOR WIRE HARNESS.

Risk. THIS COULD POSSIBLY CAUSE AN UNDERHOOD FIRE.

Remedy. DEALERS WILL REPLACE THE CAMSHAFT POSITION SENSORS AND INSTALL AN ADDITIONAL FUSE. THE RECALL BEGAN ON SEPTEMBER 7, 2004. OWNERS SHOULD CONTACT DAEWOO AT 1-877-362-1234, OPTION 6, OR FIND A LOCAL DEALER THROUGH THEIR WEBSITE AT WWW.DAEWOOUS.COM.

Defect. CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 106, "BRAKE HOSES." A CRACK CAN DEVELOP IN THE OUTER RUBBER LAYER OF THE FRONT BRAKE HOSE(S).

Risk. THIS CAN RESULT IN BRAKE HOSE RUPTURE, BRAKE FLUID LEAKAGE, AND LOSS OF VEHICLE BRAKING.

Remedy. DEALERS WILL INSTALL NEW REDESIGNED FRONT BRAKE HOSES. OWNER NOTIFICATION BEGAN OCTOBER 27, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAEWOO AT 1-877-362-1234, SELECTION 1.

TL*THE CONTACT OWNS A 2001 DAEWOO NUBIRA WAGON. THE CONTACT STATED THAT THE CHECK ENGINE LIGHT ILLUMINATED ON THE INSTRUMENT PANEL. THE VEHICLE WAS TAKEN TO A LOCAL REPAIR SHOP WHERE THE CONTACT WAS INFORMED THAT THE CAMSHAFT POSITION SENSOR NEEDED TO BE REPLACED. THE VEHICLE HAD NOT BEEN REPAIRED. THE FAILURE MILEAGE WAS 19,941.

THE CHECK ENGINE LIGHT CAME ON AND WHEN DIAGNOSED IT WAS RELATED TO A DEFECT IN THE CAMSHAFT POSITION SENSOR. I CAME TO KNOW ABOUT A RECALL REGARDING MY VEHICLE MODEL ON THE CAMSHAFT SENSOR AND TOOK IT TO A DEALERSHIP FOR REPAIR. THE DEALERSHIP SAID THE CAR WAS NOT IN THE DATABASE AND REFUSED TO DO THE REPAIR. IN THE RECALL LETTER IT SAYS THAT WITH THIS CAMSHAFT DEFECT THERE IS A RISK OF ENGINE CATCHING FIRE. *TR

THE DAEWOO NUBIRA 2001 SHOULD BE RECALLED TO REPLACE LOWER CONTROL ARMS WHICH ARE ATTACHED TO THE SUSPENSION. I FEEL THE CONTROL ARMS' INADEQUACIES ARE CATASTROPHES WAITING TO HAPPEN. THE CONTROL ARMS ARE FAULTY AND COULD CAUSE STEERING FAILURE. THIS IS A PART THAT IS REPLACED ON THIS CAR MODEL TOO OFTEN. WHAT HAPPENS IF SOMEONE DOES NOT HAVE $700 TO PAY FOR REPAIR? I ASK THIS BECAUSE WHEN I DRIVE THE DAEWOO IT IS INCREASING DIFFICULT TO HOLD IT ON THE ROAD DUE TO THE FRONT END RACK AND PINION STEERING JERKING LEFT AND RIGHT. I LIMIT MY DRIVING TO THE SUPERMARKET AND SMALL ERRANDS BECAUSE OF THIS PROBLEM, AND BECAUSE OF THIS DEFECT I DRIVE SLOWLY AND ON SMALL STREETS. GETTING ON THE HIGHWAY IS COMPLETELY OUT OF THE QUESTION. I WAS TOLD BY THE TECHNICIAN AT MOTOR CITY, ODESSA, TEXAS, 432-550-8721, THAT THE BALL JOINT MAY FALL FROM THE FRAME CAUSING LOSS OF CONTROL. I NEED REPLACEMENT OF THESE CRUCIAL PARTS. I CAN LIVE WITH PEELING PAINT, BARELY FUNCTIONING ELECTRIC WINDOWS, AND A NON FUNCTIONING AIR CONDITIONER, BUT I CANNOT LIVE WITH A STEERING PROBLEM THAT IS VEERING OUT OF CONTROL. I KNOW THAT DAEWOO IS NO LONGER IN BUSINESS - BUT GMC IS. I ALSO KNOW THAT THE RATIO OF DAEWOOS TO OTHER AUTOMOBILES ON THE ROAD IS LOW; HOWEVER, ANY FUNCTION OR PART ON A PRODUCT THAT MAY CAUSE EVEN ONE ACCIDENT DUE TO MECHANICAL FAILURE SHOULD BE TAKEN SERIOUSLY BY YOUR DEPARTMENT. AN ACCIDENT CAUSED BY A MALFUNCTIONING STEERING MECHANISM ON ANY AUTOMOBILE MAY LEAD TO SOMEONE'S DEATH. *TR

CONSUMER RECEIVED NHTSA RECALL 02V257000 CONCERNING FMVSS 106 BRAKES HOSES. CONSUMER COULD NOT LOCATE A DEALER TO HONOR THE RECALL. *AK

THE CONSUMER RECEIVED THE CAMSHAFT SENOR AND THE BRAKE RECALLS. THE DEALER STATED THE VEHICLE WAS NOT INCLUDED PER THE DAEWOO COMPUTER. *JB *NM

RECALL 04V357000 WAS ISSUED FOR CAM SHAFT POSITION. *BF THE CONSUMER HAD THE REPAIRS DONE TO THE VEHICLE IN APRIL 2004, THE RECALL LETTER THAT THE CONSUMER RECEICED WAS DATED SEP, 2004. *TC *JB

THE CONSUMER RECEIVED RECALL CAMPAIGN 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. THE VEHICLE WAS TAKEN TO THE DEALER FOR REPAIRS, AND THE DEALER TOLD THE CONSUMER THAT THE PARTS WOULDN'T BE IN FOR 4 OR 5 MONTHS. THE CONSUMER CALLED BACK A COUPLE OF WEEKS LATER TO INQUIRE WHETHER OR NOT ANOTHER DEALER HAD THE PARTS BUT RECEIVED NO ANSWER. *AK *SC

NHTSA RECALL 02V131000, AFTER BRAKING VEHICLE DID NOT STOP. CONSUMER'S VEHICLE REAR ENDED ANOTHER VEHICLE. THE BRAKE PADS WERE REPLACED THREE TIMES. *AK

DEALERSHIP IS CHARGING THE CONSUMER TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS. VIN NUMBER WAS INCLUDED IN THE RECALL BUT THE RECALL PART NUMBER WAS NOT INCLUDED, ALTHOUGH THE ENGINE LIGHT WAS ON. *AK

DEALERSHIP WAS CHARGING THE CONSUMER TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS. VIN WAS INCLUDED IN THE RECALL, BUT THE RECALL PART NUMBER WAS NOT INCLUDED, ALTHOUGH THE ENGINE LIGHT WAS ON. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. NO AVAILABLE AUTHORIZED SERVICE CENTER IN AREA.*AK

CONSUMER STATES THAT SHE RECEIVED A RECALL FROM DAEWOO, CALLED THE DEALER AND WAS TOLD THAT THEY DO NOT HAVE PARTS, BUT WILL CALL HER WHEN THEY GET THEM IN. SHE STATES THAT THE DEALERSHIP DID NOT SPECIFY ANY SPECIFIC TIME THAT THEY THOUGHT THAT THEY WOULD BE GETTING THE PART TO REPAIR HER VEHICLE. *JB VEHICLE HAS BEEN REPAIRED AND THE CONSUMER IS SATISFIED. *TC

THE CHECK ENGINE LIGHT CAME ON INTERMITTENTLY. THERE WAS NO DAEWOO DEALER TO MAKE THE REPAIR. A REGULAR DEALER HAD AGREED TO MAKE THE REPAIR AT A COST TO THE CONSUMER. NHTSA RECALL 04V357000. *JB

THE CONSUMER RECEIVED, NHTSA RECALL CAMPAIGN LETTER #04V357000 REGARDING THE CAMSHAFT POSITION SENSOR. THE DEALERSHIP WERE FAR AWAY FROM THE CONSUMERS HOME. *JB *TC

CONSUMER RECEIVED A RECALL NOTICE REGARDING THE BRAKE HOSE. THERE WAS NO DEALER AVAILABLE IN THE ARE TO PERFORM THE RECALL. *JB

CONSUMER RECEIVED RECALL NOTICE 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

RECALL 04V357000, CHECK ENGINE LIGHT CAME ON, AND VEHICLE STOPPED RUNNING. CAM SHAFT SENSOR WAS DEFECTIVE. NO DEALER WAS AVAILABLE TO MAKE REPAIRS. *AK THE BRAKES WERE REPAIRED TWICE. *NM

RECALL 04V357000 CPNCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE AN AUTHORIZED SERVICE CENTER IN HIS AREA.*AK

CONSUMER RECEIVED NHTSA RECALL 02V257000 ON THE FMVSS 106 CONCERNING BRAKE HOSES. HOWEVER, CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 02V131000 CONCERNING BRAKE HOSE .NO DEALER WAS AVAILABLE TO DO REPAIRS. *AK

CONSUMER RECEIVED RECALL 02V257001 CONCERNING BRAKE HOSE. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 02V257001 CONCERNING BRAKE HOSE. DEALER WAS NOT IN OPERATION. *AK

02 V 257 000/FMVSS 106-BRAKE HOSES AND 04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: THE CONSUMER RECEIVED TWO RECALL NOTICES AND WAS UNABLE TO LOCATE A AUTHORIZED SERVICE CENTER IN HER AREA. *JB

THE CONSUMER HAD TO PAY AN OUT OF POCKET EXPENSE FOR THE CAMSHAFT SENOR. NHTSA RECALL 04V357000. *JB

CAM SHAFT POSITION SENOR SENDING SENOR SIGNALS TO ENGINE. *BF THE CONSUMER WAS UNABLE TO LOCATE A DEALERSHIP IN THE AREA TO PERFORM THE RECALL. THE DEALERSHIP THE CONSUMER DID FIND WAS 2 1/2 HOUS AWAY FROM HOME AND THE CONSUMER DID NOT WANT TO TAKE THAT LONG TRIP AND SOMETHING HAPPENED TO THE CAR. *JB

SAFETY RECALL ON DAEWOO IN REGARDING TO CHECK ENGINE LIGHT. *BF THE CONSUMER RECEIVED A RECALL LETTER IN THE MAIL, HE TOOK THE VEHICLE TOOK DEALER BUT BECAUSE THE LIGHT WAS NOT ON AT THE TIME, AN ENGINE CHECK WAS NOT PERFORMED. THE CONSUMER STATED THE ENGINE LIGHT CAME ON EVERY TWO WEEKS AND STAYED LIT FOR 2 TO 3 DAYS AT A TIME. THE CONSUMER CALLED THE DEALERSHIP AND MADE AN APPOINTMENT FOR THE RECALL TO BE PERFORMED AFTER THE INSPECTION, THE CONSUMER WAS TOLD THE VEHICLE NEEDED A CAM SENSOR REPLACED AND A FUSE KIT DUE TO A MALFUNCTION. THE CONSUMER WAS TOLD THE COST WAS 200.00 EVEN THOUGH THERE WAS A RECALL THAT REFERRED TO THE VERY SAME PROBLEM. *JB

THE CAMSHAFT SENSOR RECALL, THE CONSUMER HAD TO PAY OUT OF POCKET. NHTSA RECALL 04V357000. *JB

02 V 131 001/FMVSS 201 AIR BAG DEPLOYMENT & 04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: CONSUMER RECEIVED BOTH OF THESE RECALL NOTICES AND WAS UNABLE TO LOCATE A AUTHORIZED SERVICE CENTER WITHIN HER AREA. *JB......CONSUMER CLAIMED HE DID NOT RECEIVE AIR BAG DEPLOYMENT RECALL, ONLY A BRAKE HOSE AND CMP RECALL.*AK

THE CONSUMER RECEIVED A RECALL NOTICE(02V257001) REGARDING THE BRAKE HOSE, HOWEVER THERE WAS NO DEALER AVAILABLE TO PERFORM THE RECALL. *JB

02 V 257 000/FMVSS 106/BRAKE HOSES: THE CONSUMER WAS UNABLE TO GET THIS RECALL HONORED, DUE TO NO LOCAL AUTHORIZED SERVICE CENTERS IN THE AREA. *JB

THE CONSUMER WAS UNABLE TO HAVE THE BRAKE HOSE RECALL 02V257000 PERFORMED BECAUSE THE DEALERSHIP LISTED ON THE DAEWOO WEBSITE IN THEIR STATE WAS NOT LONGER LOCATED AT THE ADDRESS PROVIDED. *JB

THE CHECK ENGINE LIGHT CAME ON , AND THE VEHICLE BEGAN SMOKING. 04V3570000. *JB THE CONSUMER RECEIVED A RECALL FOR THE CAMSHAFT SENSOR. THE CONSUMER ATTEMPTED TO CONTACT SOMEONE AT THE NUMBER LISTED ON THE RECALL BUT NO ONE ANSWERED. THE CONSUMER INDICATED THAT THERE IS NO ON IN HER AREA THAT CAN REPAIR THE CAR. *NM

CONSUMER RECEIVED A RECALL NOTICE(0V4357000) CAMSHAFT POSITION SENSOR: DEALER WAS NOT IN OPERATION. *NM

NHTSA RECALL 02V257000 ON THE FMVSS 106/BRAKE HOSES. CONSUMER IS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *NM

CONSUMER RECEIVED NHTSA RECALL 04V357000 ON THE CAMSHAFT POSITION SENSOR. THE DEALER REFUSED TO HONOR THE RECALL BECAUSE THE CAMSHAFT MODEL NUMBER IS NOT DEFECTED EVEN THOUGH THE VIN FALL IN THE DEFECTED VEHICLES.

THE CONSUMER RECEIVED A RECALL NOTICE(04V357000) FOR THE CAM SHAFT POSITION SENSOR. THERE WERE NO PARTS AVAILABLE. *JB THE CONSUMER WENT BACK TO THE DEALER TO HAVE THE RECALL PERFORMED AFTER IT WAS PERFORMED THE CONTINUED TO COME ON. THE DEALER CHARGED THE CONSUMER FOR THE WORK. *JB

THE CONSUMER RECEIVED A RECALL FOR THE BRAKES ON THE DAEWOO. 02V257000. *JB

A RECALL (04V357000) WAS ISSUED FOR THE CAM SHAFT POSITION SENSOR. THE CONSUMER WAS UNABLE TO FIND AN AUTHORIZED DEALER TO REPAIR THE VEHICLE. CONSUMER STATED SHE HAS ATTEMPTED TO CALL THE MANUFACTURER SINCE SEPTEMBER THE 7, 2004. PLEASE PROVIDE ADDITIONAL INFORMATION. *JB THE CONSUMER STATED THAT WHILE THE CHECK ENGINE LIGHT IS CONSTANTLY ON SHE WILL NOT KNOW IF SOMETHING IS REALLY WRONG OR IF SOMETHING ELSE IS WRONG BEFORE SHE GETS THE VEHICLE SERVICED FOR THE RECALL. DAEWOO NO LONGER DEALS IN THE UNITHED STATES. *TC

THE CONSUMER WAS UNABLE TO HAVE THE CAM SHAFT POSITION (CMP) SENSOR RECALL 04V357000 PERFORMED BECAUSE THERE WASN'T ANY DEALERSHIPS IN THE STATE. *JB

RECALL 04V357000 FOR CAM SHAFT POSITIONS SENSOR WAS ISSUED. DEALER STATED THE PARTS WERE NOT AVAILABLE. *AK

CONSUMER IS UNABLE TO FIND A DEALERSHIP TO REPAIR RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. *AK

CONSUMER RECEIVED RECALL 0V4357000 FOR CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER WAS REFUSED SERVICE ON THE VEHICLE FOR CAM SHAFT SENSOR. THE CHECK ENGINE LIGHT WAS ON. RECALL 04V357000.*AK

THE FRONT CONTROL ARM IS DEFECTIVE, VEHICLE MAKES A LOUD NOISE WHEN SHUTTING OFF. CAM SHAFT SENSOR RECALL 04V357000. *AK

CONSUMER RECEIVED RECALLS 02 V 131 001 CONCERNING FMVSS 201 AIR BAG DEPLOYMENT, AND 04 V 357 000 REGARDING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE ANY AUTHORIZED SERVICE CENTER IN HIS AREA THAT WERE WILLING TO HONOR THESE RECALLS.*AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. THE FOLLOWING DEALERSHIPS DIDN'T HAVE ANY MORE DAEWOO TECHNICIANS, ADDRESS: 5402 HIGH CROSSING BLVD. ADDISON , WI 53718, PHONE: 608-246-7800, AND BOUCHER DAEWOO OF MADISON EAST, ADDRESS: 5402 HIGH CROSSING BLVD, MADISON , WI 53718, PHONE: 608-246-7800. *AK

NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT LOCATE A DEALER IN THE AREA TO HONOR THE RECALL.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR FROM THE MANUFACTURER AND WENT TO THE DAEWOO DEALERSHIP WHERE THE VEHICLE WAS PURCHASED. THE SERVICE DEPARTMENT WANTED TO CHARGE CONSUMER $40.00 FOR A DIAGNOSTIC TEST JUST TO BE SURE THAT THE DEFECT WAS AS DESCRIBED IN THE RECALL NOTICE. CURRENTLY, DEALERSHIP WAS TELLING CONSUMER THAT PARTS WILL NOT BE AVAILABLE FOR 3 TO 4 WEEKS. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE, THE PHONE PROVIDED IN THE RECALL LETTER WAS NOT WORKING. *AK