2008 BMW R1200 RT

Defect. BMW of North America, LLC (BMW) is recalling certain 2009-2011 K1300 (S, GT), 2010-2011 S1000 RR, 2005-2011 R1200 (GS, GS Adventure, R, RT, S, ST), 2006-2010 HP2 (Enduro, Megamoto, Sport), 2005-2008 K1200 (R, R Sport, S, GT), and 2012 K1600 (GT, GTL) motorcycles that were repaired under recall 13V-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running.

Risk. A fuel leak in the presence of an ignition source can increase the risk of a fire.

Remedy. BMW will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began January 18, 2021. Owners may contact BMW customer service at 1-800-525-7417.

Defect. BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.

Risk. If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.

Remedy. BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on May 7, 2015. Owners may contact BMW customer service at 1-800-525-7417.

Defect. BMW of North America, LLC (BMW) is recalling certain model year 2005-2011 model year R-model motorcycles, model year 2005-2012 K-model motorcycles, model year 2010-2011 S 1000 model motorcycles, and model year 2006-2010 HP2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.

Risk. A fuel leak in the presence of an ignition source may result in a fire.

Remedy. BMW will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on April 16, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at [email protected].

Defect. BMW IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 R 1200 AND K 1200 SERIES MOTORCYCLES MANUFACTURED FROM AUGUST 2006 THROUGH MAY 2009. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, AND THEREFORE ASSOCIATED VIBRATION. THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINE COULD SPLIT AND START TO DEVELOP A LEAK.

Risk. IF THIS GOES UNNOTICED, AND THE BRAKE FLUID RESERVOIR RUNS EMPTY, THE FRONT BRAKES COULD FAIL, INCREASING THE RISK OF A CRASH.

Remedy. BMW WILL NOTIFY OWNERS AND DEALERS WILL INSTALL NEW BRAKE LINES, CONTAINING A "SLEEVE" ALONG A PORTION OF THE LINES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 20, 2010. OWNERS MAY CONTACT BMW AT 1-800-525-7417.

Defect. BMW IS RECALLING 1,535 MY 2007-2009 R1200RT MOTORCYCLES. DUE TO ROUTING AND ASSEMBLY TOLERANCES OF THE FRONT BRAKE LINES, IT IS POSSIBLE FOR THE LINES TO BE UNDER STRAIN. IN COMBINATION WITH VIBRATION DURING RIDING, THE BRAKE LINES COULD DEVELOP A LEAK. THE LEVEL OF FLUID IN THE FRONT BRAKE FLUID RESERVOIR COULD DROP RENDERING THE FRONT BRAKES INOPERATIVE.

Risk. IN THE EVENT THAT ONLY THE REAR BRAKES WERE OPERATIONAL, SEVERE LOSS OF CONTROL DURING HARD BRAKING COULD RESULT. THIS COULD RESULT IN A SERIOUS CRASH.

Remedy. BMW WILL NOTIFY OWNERS AND REPAIR THE MOTORCYCLES WITH NEW FRONT BRAKE LINES, WITH MODIFIED ROUTING FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 5, 2009. OWNERS MAY CONTACT BMW AT 1-800-831-1117.

The bike is a 2008 BMW R1200RT. The throttle bodies for each cylinder has a plastic cam that is the point of attachment for the throttle cable. That plastic cam broke and completely detached from the bike. I was accelerating to merge into traffic on Interstate 64E at Corydon, IN. Once established in the right lane, the bike suddenly lost power and slowed rapidly while I was approached from the rear by a tractor trailer that had to apply brakes and continuously sounded his horn while abruptly maneuvering to the left lane to avoid me while I was attempting to assess what had just happened. This is a critical safety component and its failure has been documented countless number of times on various owner's group forums for this type of bike. One of which is linked here: https://www.bmwsporttouring.com/topic/91897-throttle-body-more-cracked-cable-camspulleys/ Another: https://forums.bmwmoa.org/showthread.php?76036-Broken-Throttle-Body-Pulleys-2009-R1200RT/page5 It is apparent the plastic that this throttle body cam is made from deteriorates rapidly causing a significant safety risk. There are aftermarket replacements that are made from aluminum, but they are very expensive. I am asking for a safety recall and that BMW be made to replace these parts with a metal or a material that is less prone to failure.

My forth vehicle with throttle body cams that are cracked and broken on both sides. No symptoms or warning lights of a problem that could have lead to a catastrophic failure, total engine propulsion failure, breakdown. My safety and others were in danger of injury or death. Dealer has confirmed and repaired all vehicles.

This is a two-cylinder engine with an independent throttle body for each cylinder. The throttle is actuated by a cable and pulley which rotate the throttle plate on a shaft. The pulley is attached to the shaft with molded plastic. Upon inspection during service, both plastic moldings (both cylinders) were discovered to be cracked and near failure. Failure of this part will cause that cylinder to go to idle power. If the vehicle is in motion, there will be a sudden loss of power, and high vibration until the throttle is closed. Until repair, the motorcycle will be inoperable. This has become a known defect with this series of motorcycles. I repaired mine using an aftermarket aluminum part created to address this problem. Parts cost was $458.

THIS SERIES OF MOTORCYCLES HAS A COMMON PROBLEM WITH CRACKS IN THE THROTTLE PULLEYS ON THE THROTTLE BODY. FAILURE OF THIS PLASTIC PART WILL RESULT IN INSTANT LOSS OF POWER. I HAVE BEEN READING ABOUT THIS PROBLEM, AND DECIDED TO INSPECT THE TWO THROTTLE BODIES ON MY MOTORCYCLE AS A PRECAUTION. BOTH OF MINE WERE CRACKED. ONE OF THE PULLEYS HAS THREE CRACKS IN IT, AND WOULD LIKELY HAVE FAILED WITHIN A SHORT TIME. SEE PHOTOS INCLUDED WITH THIS REPORT.

ABS PUMP MOTOR IS FAILING ON MANY OF THE SAME MODEL BIKES AND SOME OTHER 2006-2008 MODEL BMW BIKES WITH LOW MILEAGE, BECAUSE THE BRUSH HOLDERS IN THE ABS ELECTRICAL MOTOR ARE TOO TIGHT AND BRUSHES GET STUCK IN THEM - BAD DESIGN OF THE ABS PUMP MOTOR. BMW WILL ASK YOU LOADS OF MONIES FOR THE REPLACEMENT OF THE PUMP, EVEN THO THEY ARE FULLY AWARE IT'S A PROBLEM WITH MANY OF THE BIKES.

FUEL PUMP LEAKING FROM A CRACK IN THE HIGH PRESSURE OUTPUT LINE SPRAYED GASOLINE ON THE INSIDE OF THE FAIRING, MOTOR AND MY LEG. THE PUMP SPRAYS GASOLINE ANYTIME THE KEY IS IN THE ON POSITION.

VEHICLE BEGAN EXHIBITING ENGINE STALLING SYMPTOMS FOR ABOUT A MONTH (ENGINE DIES WITHOUT WARNING AS IF IGNITION HAD BEEN CUT) DURING CITY DRIVING, WHILE TURNING AND PULLING INTO A PARKING SPACE AT ABOUT 5 MPH, THE VEHICLE ENGINE QUIT ALONG WITH INSTRUMENT PANEL GOING BLANK. ELECTRICAL SMOKE BEGAN TO BILLOW BETWEEN THE FRONT FORKS. THIS LASTED FOR ABOUT 10 SECONDS. AFTER GETTING THE VEHICLE HOME, I DISCOVERED THAT THE FIRE APPEARED TO HAVE ORIGINATED IN THE IGNITION WIRING HARNESS SOMEWHERE BETWEEN THE FRONT FORKS. THE HARNESS WRAP APPEARS TO HAVE FRICTION WEAR INDICATIONS EXPOSING BARE WIRING. THE FAULTY WIRE MELTED THE INSULATION ALL THE WAY FROM THE IGNITION SWITCH DOWN INTO THE MAIN WIRING HARNESS THAT IS ROUTED UNDER THE FUEL TANK.

THE BRAKE FAILURE LIGHT CAME ON, BMW SHOP SAID ABS UNIT IS BAD $2000 FIX. ON MANY BMW MOTORCYCLE FORUMS THERE ARE MANY ABS UNIT FAILURES. BMW KNOWS ABOUT THESE FAILURES BUT DOES NOTHING.

VEHICLE HAS 6000 MILES ON IT. PREVIOUS OWNER HAD A RECEIPT FROM THE DEALER SHOWING THE FUEL LEVEL SENSOR HAD BEEN REPLACED UNDER WARRANTY. FUEL INDICATOR SHOWS 1/4 TANK OF FUEL, AND ENGINE COMPUTER SHOWS 92 MILES RANGE. VEHICLE STALLED AT AN INTERSECTION, OUT OF FUEL. I WAS ABLE TO PUSH THE MOTORCYCLE OUT OF TRAFFIC, BUT IT COULD HAVE BEEN A DANGEROUS SITUATION.

PREMATURE FAILURE OF THE ABS PUMP AT 29K MILES. VEHICLE WAS STATIONARY. BRAKES STILL FUNCTION BUT WITHOUT ABS.

BRAKE FAILURE LIGHT CAME ON WHILE RIDING. INVESTIGATION BY MECHANIC SHOWS ABS HAS FAILED. BIKE ONLY HAS 26,000 MILES. THIS IS UNACCEPTABLE AND SHOULD BE A RECALL BASED ON INFORMATION AND REPORTS ON THE VARIOUS LISTS AND BOARDS I PARTICIPATE ON. FAULT CODES 24048 (ABS PUMP MOTOR DEFECTIVE) AND 24049 (POWER SUPPLY TO PUMP MOTOR FAULTY). THIS IS A DESIGN DEFECT AND BASED ON IT BEING AN INTEGRAL BRAKING SYSTEM FAILURE SHOULD BE RECALLED AND REPAIRED BY MANUFACTURER.

THE ABS MODULE FAILED WHILE IT WAS BEING DRIVEN ON A HIGHWAY. THE DEALER AND BMW ASKED IF IT WAS PARKED OUTSIDE AND IT WAS FOR A SHORT TIME ONLY. THEY SAID THE MODULE CORRODED. IT IS A SEALED MODULE AND IF IT CORRODED IT MUST HAVE BEEN DEFECTIVE IN ORDER TO ALL THE ELEMENTS NECESSARY IN FOR IT TO CORRODE. FORTUNATELY I AM A VERY EXPERIENCED RIDER AND QUICKLY RELEASED THE BRAKE AS IT LOCKED UP (WHAT THE ABS SYSTEM IS TO PREVENT. I HAVE NEVER HEARD OF AN ABS MODULE FAILING LIKE THIS. I DISCUSSED THIS WITH THE DEALER AND BMW AND BOTH DECLINED TO HELP.

WITH JUST 16124 MILES, MY MOTORCYCLE HAS A FINAL DRIVE RING BEARING FAILURE. THE BMW DEALER DIAGNOSED THE PROBLEM WHEN CONDUCTING THE REAR FLANGE RECALL REPAIR. THIS FAILURE IS SO COMMON THAT IT HAS BECOME ENDEMIC. BMW OFFERS NO HELP WITH THE REPAIR AN OBVIOUS DESIGN ERROR.

TL* THE CONTACT OWNS A 2008 BMW R 1200 RT MOTORCYCLE. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 15V141000 (WHEELS); HOWEVER, THE MANUFACTURER AND DEALER REFUSED TO HONOR THE REMEDY WHICH MENTIONED THE REPLACEMENT OF THE ALUMINUM REAR WHEEL FLANGE WITH A STEEL ONE. THE DEALER ONLY WANTED TO INSPECT THE VEHICLE. THE MANUFACTURER WAS NOTIFIED OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE.

I WAS RIDING ALONG AT ABOUT 50 MPH WHEN THE MOTORCYCLE BEGAN EXPERIENCING A LACK OF STABILITY AND DIRECTIONAL CONTROL. IT FELT LIKE I HAD A FLAT TIRE. AT THE SAME TIME THERE WAS LOUD RUMBLING AND A VIBRATION FELT THROUGHOUT THE BIKE. *TR

THE ABS AND REAR BRAKING SYSTEM FAILED. THIS WAS INDICATED BY AN INSTRUMENT PANEL RED WARNING LIGHT, "BRAKE FAILURE". AS A RESULT OF THIS FAILURE, THE REAR WHEEL BRAKE DID NOT OPERATE AS DESIGNED (INTEGRAL BRAKES) AND THE ABS SYSTEM WAS NON-FUNCTIONAL. THE SCANNED CODES STATE THAT THE POWER SUPPLY TO PUMP MOTOR IS FAULTY. *TR

THE FUEL GAUGE SHOWED 1/4 TANK OF FUEL, BUT THE MOTORCYCLE HAD ACTUALLY RUN OUT OF FUEL ON A VERY BUSY SECTION OF INTERSTATE 95 IN DELAWARE JUST BEFORE THE I 95 / I 295-I 495 SPLIT. I WAS IN THE FAR LEFT HAND TRAVEL LANE AND WAS ABLE TO IMMEDIATELY PULL OFF ONTO A WIDENED LEFTHAND SECTION OF BREAKDOWN LANE THAT WAS LED INTO THE IMMEDIATELY ADJACENT DELAWARE DOT SALT/SAND BARN. THE SUDDEN DECELERATION WAS COMPLETELY UNEXPECTED, AND I WAS ALMOST REAR-ENDED BY ANOTHER MOTORIST JUST AS I WAS MOVING INTO THE BREAKDOWN LANE, IN SPITE OF PULLING IN THE CLUTCH TO COAST SO AS NOT TO CONTINUE WITH THE STRONG ENGINE BREAKING THAT RESULTED. HAD TO CALL AAA SERVICES TO GET FUEL ENOUGH TO GET TO A REFUELING STATION. FUEL TANK SENSOR WAS ULTIMATELY REPLACED BY LOCAL BMW MOTORCYCLE DEALER A MONTH AND A HALF AGO, BUT FAILED AGAIN LAST WEEK!!! THIS SENSOR HAS BEEN A PROBLEM FOR BMW, AND CONTINUES TO BE, AS SEVERAL OF MY FRIENDS HAVE HAD THEIRS REPLACED SEVERAL TIMES EACH. IF I WERE TO RUN OUT OF GAS ON A DANGEROUS HIGHWAY, OR IN A REMOTE LOCATION - IN EITHER EXTREME COLD OR HOT, WITHOUT A WAY TO CONTACT HELP, IT COULD PROVE TO BE DANGEROUS. THE SUDDEN DECELERATION ALONE ALMOST CAUSED ME TO BE REAR-ENDED, WHICH COULD HAVE BEEN DEADLY. *TR

THE FUEL STRIP INDICATOR HAS NOW FAILED 3 TIMES, TWICE LEAVING ME STRANDED WITH AN EMPTY FUEL TANK. *TR

TL* THE CONTACT OWNS A 2008 BMW R1200RT MOTORCYCLE. THE CONTACT STATED THAT WHILE DRIVING 45 MPH, THE DRIVE SHAFT FRACTURED AND CAUSED THE REAR WHEEL TO LOCK. THE CONTACT WAS ABLE TO COAST ON TO THE ROAD SHOULDER BUT SUFFERED SCRAPES AND BRUISES WHILE DOING SO. THE VEHICLE WAS NOT TAKEN TO THE DEALER. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE AND CURRENT MILEAGE WAS 52,000. UPDATED 09-18-13 *BF

FUEL GAUGE FAILED, AGAIN, CAUSING POTENTIAL STALLING IN TRAFFIC CREATING DANGEROUS SITUATION. *TR

FUEL GAUGE FAILED, WARNING LIGHT CONSTANTLY ON. BIKE COULD RUN OUT OF FUEL IN TRAFFIC WITH NO WARNING CAUSING DANGEROUS SITUATION. *TR

MOTORCYCLE GAS GAUGE SHOWED HALF FULL WHEN IT STOPPED RUNNING, HAD TO CROSS TWO LANES OF TRAFFIC DURING RUSH HOUR TO GET TO THE SHOULDER OF THE ROAD. BIKE WAS OUT OF GAS....THIS HAS HAPPEN 5 TIMES NOW ( RUNNING OUT OF GAS ).. ONE DAY SOMEONE IS GOING TO BE KILLED BECAUSE BMW WILL NOT STEP UP AND RECALL THE FUEL STRIP CAUSING THE PROBLEM.. *TR

A FUEL LEAK DEVELOPED IN THE PLASTIC FUEL PUMP FLANGE AT THE FUEL LINE QUICK DISCONNECT FITTING. I SMELLED A STRONG GASOLINE SMELL IN MY GARAGE WHERE MY NATURAL GAS WATER HEATER IS LOCATED. HAVING HEARD OF THIS COMMON PROBLEM ON BMW SPORT TOURING FORUM, I REPAIRED CRACKS IN THAT FLANGE WITH JB WELD AND A $30 CLAMP MADE JUST TO FIX THIS PROBLEM AVAILABLE ONLINE. I AM REPORTING THIS NOW TO ADD MY INCIDENT TO YOUR DATABASE ON THIS ISSUE. IF MY GARAGE HAD BEEN SMALLER OR THE LEAK A LITTLE WORSE, IT COULD HAVE BEEN A DISASTER. *TR ## VIN FAILED

I DISCOVERED THAT MY FUEL PUMP WAS DEVELOPING CRACKS AROUND THE FUEL LINE FITTING. I DISCOVERED THE CRACKS BEFORE COMPLETE FAILURE OCCURRED. I DID NOT SUFFER A FAILURE ONLY BECAUSE I HAD LEARNED OF THIS POTENTIAL SAFETY HAZARD FROM FRIENDS, ONE OF WHOM HAD HIS LEFT LEG SOAKED WITH GASOLINE AS A RESULT OF GASOLINE SPRAY COMING FROM BENEATH THE LEFT SIDE BODY PANELS. MY FRIEND, A MECHANICAL ENGINEER, ADVISED THAT BMW USED PIPE THREADS IN THE FITTING THAT RESULTED IN OUTWARD FORCE UPON TIGHTENING, AND FAILURE WOULD LIKELY OCCUR ON ALL MODELS. I PURCHASED A "FIX" KIT FOR THIS WIDELY KNOWN PROBLEM FROM BEEMER BONEYARD, NAMELY A METAL CLAMP TO PLACE AROUND THE BASE OF THE PLASTIC FUEL PUMP FITTING. I HOPE IT HOLDS THE CRACKS FROM GROWING ANY WORSE. THIS FUEL PUMP SHOULD BE RECALLED. I UNDERSTAND THAT THERE IS AN OPEN INVESTIGATION ON THIS ISSUE. *TR

DISCOVERED SEVERAL CRACKS AT FUEL PUMP OUTLET FLANGE. REPAIRED AT MY OWN COST IN ORDER TO PREVENT POSSIBLE FIRE. THIS IS A WELL-KNOWN AND WELL-DOCUMENTED PROBLEM WITH THIS FUEL PUMP. *TR

BIKE DIED ENTERING INTERSECTION. ONLY SPACING AVERTED ACCIDENT. BOUGHT USED LESS THAN ONE WEEK AGO. FUEL GAUGE SHOWED JUST UNDER 1/2 TANK AND 120 MILES TO EMPTY. GAS TANK WAS EMPTY WITHOUT WARNING. GAS GAUGE STRIPS IN TANK FAIL - BMW HAS KNOWN ABOUT THIS SAFETY ISSUE FOR YEARS, ARE YOU? AND, IF "GERMAN ENGINEERING" IS MORE THAN MARKETING, WHY HAVEN'T THEY FIXED IT? *TR

I AM WRITING IN RESPONSE TO YOUR INVESTIGATION CONCERNING BMW MOTORCYCLE FINAL DRIVE FAILURES AND WISH PROVIDE SUPPORTING INFORMATION. I HAVE A 2008 BMW R1200RT (VIN [XXX]) IN WHICH THE FINAL DRIVE DEVELOPED SIGNIFICANT ROUGHNESS IN THE REAR WHEEL ROTATION AND PRONOUNCED RUMBLING NOISE AT HIGHWAY SPEEDS AT ABOUT 22,000 MILES (EARLY 2011). I CONTINUED TO OPERATE THE MOTORCYCLE UNTIL 23, 400 MILES AT WHICH POINT I CONTACTED BMW USA AND MY LOCAL DEALER (AUGUST 2011). AS MY MOTORCYCLE WAS A FEW MONTHS OUT OF WARRANTY, NEITHER ORGANIZATION WAS PARTICULARLY HELPFUL. IT SHOULD BE NOTED THE FINAL DRIVE LUBRICATION WAS CHANGED AT 12,000 AND 18,000 MILES SERVICE INTERVALS. NO METAL SHAVINGS NOTED WHEN THE OIL WAS DRAINED. AT NO TIME WAS FINAL DRIVE OIL LEAKAGE EVIDENT. BEING A MECHANICALLY CAPABLE INDIVIDUAL, I ELECTED TO DIAGNOSE AND REPAIR THE FINAL DRIVE MYSELF. I DISMANTLED THE FINAL DRIVE AND INSPECTED THE CROWN WHEEL BEARING. I DISCOVERED SIGNIFICANT ROUGHNESS IN THE BEARINGS ROTATION. FURTHER, I CUT THE BEARING APART TO DETERMINE THE CAUSE OF THE ROUGHNESS. THE INSIDE OF THE BEARING STILL CONTAINED GREASE AND THERE WAS NO EVIDENCE OF FINAL DRIVE OIL LEAKAGE INTO THE BEARING ITSELF. AFTER CLEANING AWAY THE GREASE, I EXAMINED THE BEARINGS RACES AND BALL BEARINGS. I NOTED SIGNIFICANT PITTING AND METAL GALLING ON THE BALLS AND BEARING RACES. I REPLACED THE FAILED BEARING WITH A NEW BEARING AND REPLACED THE SEALS. TOTAL PART COST WAS APPROXIMATELY $200. I FABRICATED THE NECESSARY SPE

CRACKED FUEL PUMP INLET BUSHING. *TT

FUEL CONTROL HOUSING CRACKED AND LEAKED FUEL ALL OVER THE PLACE INCLUDING MY LEG. WHILE UNDER PRESSURE. *TR

2008 BMW R1200RT (MOTORCYCLE) ENGINE STALLS WHILE IN OPERATION. THIS OCCURRED 3 OCCASIONS DURING A COMMUTE. FIRST STALL AFTER ACCELERATION. RESTARTED ENGINE. APPROXIMATELY 1/2 MILE DOWN THE ROAD TRAVELING 45 MPH SECOND ENGINE STALL OCCURS. RESTARTED ENGINE.. THIRD ENGINE STALLS OCCURS WITHIN ANOTHER MILE OF THE SECOND STALL ON A BUSINESS LOOP. RESTARTED ENGINE. EACH TIME THE ENGINE STALLED I WAS FORCED TO ENTER THE SHOULDER OF THE ROAD WHILE AVOID TRAFFIC BEHIND MY MOTORCYCLE. EACH TIME THE STALL OCCURRED THEIR WAS NO VISIBLE OR AUDIBLE CUE THE ENGINE WAS NO LONGER IN OPERATION THE ENGINE SIMPLY QUIT. *TR

2008 BMW R1200RT WITH UNDER 4,000 MILES OF SERVICE. REAR BRAKE PULSES UNPREDICTABLE UPON APPLICATION. NOT RELATED TO ABS. BMW DEALER ANALYSIS DETERMINED THAT IT IS DUE TO IMPROPER SURFACE TEMPERING OF THE BRAKE DISK. THIS CAUSES ALTERNATING PATCHES OF SOFT/HARD SURFACE ON THE DISK. BMW NA REFUSED TO ACCEPT RESPONSIBILITY AND PROVIDE COVERAGE UNDER WARRANTY. THIS IS AN UNSAFE CONDITION, SHARED BY OTHER MODEL AND YEAR BMW MOTORCYCLES, FOR WHICH BMW SHOULD PROVIDE RECALL AND RESOLUTION. *TR

2008 BMW R1200RT AT HIGHWAY SPEED, THE MOTORCYCLE ENGINE STOPPED WITH NO WARNING. THE CAUSE WAS FOUND TO BE THE FUEL PUMP DRIVER. IT APPEARS THAT THIS IS A VERY COMMON PROBLEM WITH THE R1200RT. *TR