Winnebago Ind., Inc.: Wheels › Hub
Winnebago Ind., Inc. reported this defect to federal regulators on Sep 17, 1991 and put the number of vehicles at risk at 160. The repair is free for as long as the recall stands.
The defect
THE FRONT AND REAR WHEEL HUB RETAINER NUTS HAVE BEEN INCORRECTLY TORQUED. THE PRELOAD ON THE BEARING FROM THE LOOSENED HUB RETAINER NUT MAY CAUSE BEARING FAILURE.
The risk
A WHEEL BEARING FAILURE MAY CAUSE THE AXLE TO BREAK,RESULTING IN LOSS OF VEHICLE CONTROL AND POSSIBLE VEHICLE ACCIDENT.
The remedy
INSPECT BEARING AND REPLACE IF NECESSARY. TORQUE THE HUB RETAINER NUT 230 TO 350 FOOT POUNDS.
4 model years covered
Newest first| Vehicle | Complaints | Recalls | Fires | Crashes |
|---|---|---|---|---|
| 1990 Winnebago CW822FT | 0 | 7 | 0 | 0 |
| 1990 Winnebago CW822FW | 0 | 7 | 0 | 0 |
| 1990 Winnebago CW825FT | 0 | 7 | 0 | 0 |
| 1990 Winnebago CW825FW | 0 | 7 | 0 | 0 |
What this page is, and what to do next
A recall is not an opinion. It is a Part 573 report a manufacturer is required by federal law to file once it decides a defect poses an unreasonable risk to safety, and it commits them to repairing the vehicle at no cost to the owner. The three passages above are the manufacturer’s own wording as published by NHTSA.
This page describes the campaign. It cannot tell you whether one particular car has already been through the shop — that is tracked by VIN, and only the manufacturer knows it. Check yours at nhtsa.gov/recalls or with a franchised dealer, quoting campaign number 91V149000.
Full record for the 1990 Winnebago CW822FT → · Recalls carrying a do-not-drive advisory → · Where this data comes from →