2010 Harley-Davidson Fltrx

Defect. Harley-Davidson Motor Company (Harley-Davidson) is recalling all 2008-2011 Touring, CVO Touring and VSRC motorcycles equipped with anti-lock brakes (ABS), including Road King (FLHR), Road King Police (EFI) (FLHP), Road King Police (EFI) (FLHPE), Electra Glide Standard Police (EFI) (FLHTP), Electra Glide Classic (EFI) (FLHTC), Electra Glide Ultra Classic (EFI) (FLHTCU) and Street Glide (EFI) (FLHX), 2008 VROD (VRSCAWA), CVO Road King 4 (FLHRSE4), Night Rod (VRSCDA), CVO Ultra Classic 3 (FLHTCUSE3), Night Rod Special (VRSCDXA), 2008-2010 Road King Classic (EFI) (FLHRC), 2008-2009 Road Glide (EFI) (FLTR) and Electra Glide Standard (EFI) (FLHT), 2009-2010 V-Rod (VRSCAW), 2009 CVO Ultra Classic (FLHTCUSE4) and CVO Road Glide 3 (FLTRSE3), 2009-2011 Night Rod Special (VRSCDX) and V-Rod Muscle (VRSCF), 2010 CVO Ultra Classic 5 (FLHTCUSE5) and CVO Street Glide (FLHXSE), 2010-2011 Electra Glide Ultra Limited (FLHTK) and Road Glide Custom (FLTRX), 2011 Road Glide Ultra 103 (FLTRU103), Street Glide 103 (FLHX103), Road King Classic 103 (FLHRC103), CVO Ultra Classic 6 (FLHTCUSE6), CVO Road Glide Ultra (FLTRUSE), Road Glide Custom 103 (FLTRX103), and CVO Street Glide 2 (FLHXSE2) motorcycles. Deposits may form on components within the brake system if the DOT 4 brake fluid is not replaced for a prolonged period of time beyond the 2-year maintenance schedule specified in the Owner’s Manual.

Risk. These deposits may cause a valve within the ABS Hydraulic Control Unit to stick, reducing braking ability and increasing the risk of a crash.

Remedy. Harley-Davidson will notify owners, and dealers will flush the entire brake system with new Platinum Label DOT 4 brake fluid, free of charge. The recall began on February 14, 2018. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson's number for this recall is 0171.

Defect. HARLEY-DAVIDSON IS RECALLING CERTAIN MODEL YEAR 2009-2012 TOURING, CVO TOURING AND TRIKE VEHICLES MANUFACTURED FROM JUNE 6, 2008, THROUGH SEPTEMBER 16, 2011. SEE THE ABOVE LIST FOR THE MODELS INCLUDED IN THE RECALL. THE REAR BRAKE LIGHT SWITCH MAY BE EXPOSED TO EXCESSIVE HEAT FROM THE EXHAUST SYSTEM.

Risk. THE EXCESSIVE HEAT MAY CAUSE THE SWITCH TO NOT ACTIVATE THE BRAKE LAMP OR ACTIVATE THE BRAKE LAMP WHEN NO BRAKE IS APPLIED AND/OR CAUSE A BRAKE FLUID LEAK AT THE BRAKE LIGHT SWITCH, AFFECTING REAR BRAKE PERFORMANCE. EITHER CONDITION MAY INCREASE THE RISK OF A CRASH.

Remedy. HARLEY-DAVIDSON WILL NOTIFY OWNERS, AND DEALERS WILL A INSTALL A REAR BRAKE LIGHT SWITCH KIT, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING OCTOBER 31, 2011. OWNERS MAY CONTACT HARLEY-DAVIDSON AT 1-414-343-4056.

TL* THE CONTACT OWNS A 2010 HARLEY DAVIDSON FLTRX EQUIPPED WITH KENDA TIRES, TIRE LINE: CATACLYSM, TIRE SIZE: 130/70/R18, DOT NUMBER: 1K32P. THE CONTACT STATED WHILE DRIVING 45 MPH, HE FELT VIBRATIONS IN THE HANDLE BARS. THE CONTACT DROVE TO HIS RESIDENCE. THE CONTACT STATED HE NOTICED TREAD SEPARATION ON THE FRONT TIRE. THE MOTORCYCLE WAS NOT DIAGNOSED. A DEALER WAS NOT CONTACTED. THE CONTACT STATED HE REPLACED THE FRONT TIRE. THE MANUFACTURER WAS INFORMED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 14,000. THE VIN WAS NOT AVAILABLE.

THE RED SECURITY LIGHT APPEARED ON THE SCREEN AND A CODE OF B1154 WAS LOGGED IN THE SYSTEM, AFTER THEY THE BIKE WOULD NOT START WHILE IN GEAR. IT HAS TO BE IN NEUTRAL TO START.

IT IS VERY NICE THAT HD IS DOING A "VOLUNTARY" RECALL. THEY ARE NOT ADDRESSING THE PROBLEM, WHICH IS THE ELECTRONICS MODULE HAS COLD-SOLDER JOINTS ON THE ANTI-LOCK SOLENOIDS. IT IS NOT DUE TO THE LACK OF MAINTENANCE OF THE BRAKE FLUID. I HAD A FIVE YEAR WARRANTY ON MY 2010 FLTRX AND THEY DID ALL OF THE SCHEDULED MAINTENANCE, AND MY FRONT BRAKE BECAME UNUSEABLE LAST FALL WHILE RIDING. I CHACKED ALL THE COMPONENTS; MASTER CYLINDER, CALIPERS, BRAKE LINES, AND FINALLY THE ANTI-LOCK MODULE. THE SOLENOIDS WERE LOCKED TIGHT, I CUT THE COVER OFF THE ELECTRONCS MODULES AND DISCOVERED THREE COLD-SOLDER JOINTS ON THREE OF THE FOUR SOLENOIDS. WHEN 12V DC WAS APPLIED TO THE SOLENOIDS DIRECTLY, THE WOULD THEN FUNCTION AS DESIGNED. THIS WILL CONTINUE TO BE A HAZARD TO RIDERS UNTIL HD REPLACES ALL OF THE ELECTRONIC MODULES ON THESE MOTORCYCLES.

HARLEY SENT OUT NOTICE TO FLUSH THE ABS BRAKE SYSTEM WHICH I DID, BUT COULDN'T BLEED THE SYSTEM,SO I TOOK IT TO MY DEALER IN WACO. THEY TOLD ME THE SYSTEM HAD FAILED AND IT WOULD COST $755.49 TO REPLACE THE VALVE. I HAVE DISCOVERED THROUGH ONLINE FORUMS THAT HARLEY'S ARE HAVING THIS PROBLEM. ABS FAILURE CAN CAUSE INJURY OR DEATH. HARLEY NEEDS TO RECALL THE SYSTEM.

SUPPLEMENT TO NHTSA REPORT 11035954. I AM HAVING MY ANTI-LOCK BRAKE SYSTEM REPLACED. I HAVE TAKEN THE OLD SYSTEM APART DO TO CLAIMS FROM THE MANUFACTURER ISSUES RELATED TO SERVICE INTERVALS, NOT MANUFACTURER DEFECTS. AFTER REMOVING THE TOP OF THE ABS MODULE 40601-08A, THREE COLD-SOLDER JOINTS WERE DISCOVERED ON THE CIRCUIT BOARD TO BRAKE SOLENOID CONNECTIONS. THIS HAS BEEN A PROBLEM WITH MANY AUTOMOBILE ABS SYSTEMS ALSO, HOWEVER, ON A THIS MOTORCYCLE IT CAUSES A COMPLETE LOSS OF BRAKES, NOT JUST A LOSS OF ANTI-LOCK SERVICE. AND, IT DOESN'T TRIGGER AN ABS SERVICE LIGHT, THERE IS ZERO INDICATION WHEN THIS PROBLEM OCCURS. IF I HAD THE MONEY I WOULD TAKE A FEW DOZEN ABS UNITS FROM RANDOM DEALERSHIPS AND CHECK THEM FOR COLD-SOLDER CONDITIONS. BUT, I DON'T HAVE THAT KIND OF MONEY AND IT NEEDS TO BE CHECKED.

FRONT BRAKE LEVER BECAME HARD (NOT MOVABLE) DURING HIGHWAY RIDING. ONLY NOTICED IT BECAUSE A CAR PULLED OUT IN FRONT OF ME. FORTUNATELY I ALWAYS USE FRONT AND REAR BRAKE WHEN STOPPING OR SLOWING. A RIDER WITH LESS EXPERIENCE CERTAINLY COULD HAVE HAD A SERIOUS ACCIDENT. AFTER SEARCHING FOR POSSIBLE REMEDIES IT HAS BECOME OBVIOUS THIS IS A PROBLEM WITH FIRST GENERATION HD ANTI-LOCK SYSTEMS.

I STARTED MY MOTORCYCLE AND PROCEEDED DOWN THE CITY STREET. WHEN I APPROACHED A STOP SIGN MY FRONT BRAKE FAILED. BRAKE HANDLE WAS STIFF(HARD) WITH NO MOVEMENT. I WAS ABLE TO BRAKE WITH THE REAR BRAKE. I ALMOST GOT HIT AT THE INTERSECTION. I KEPT HAVING THIS PROBLEM SO I BROUGHT IT TO A MECHANIC. MECHANIC TELLS ME THE ABS MODULE HAS GONE BAD AND NEEDS TO BE REPLACED. THE PART IS ABOUT $500.00. HE TELLS ME THIS PROBLEM HAS BEEN GOING ON FOR SOME TIME WITH OTHER BIKES AND IS PRETTY COMMON. FRONT BRAKE WORKS ONCE IN A WHILE WHEN THE ENGINE IS HOT BUT FAILS WHEN ENGINE IS COOL.

COMPLETE REAR BRAKE FAILURE, NO WARNING. STOP-AND-GO RUSH HOUR TRAFFIC ON THE INTERSTATE. I WAS GOING ABOUT 30 MPH AND TRAFFIC AHEAD WAS SLOWING. I PRESSED THE REAR BRAKE PEDAL AND IT WAS STUCK... WOULD NOT MOVE. ABSOLUTELY NO REAR BRAKES AT ALL. LUCKILY I WAS ABLE TO REACT QUICK ENOUGH TO GRAB THE FRONT BRAKE TO AVOID AN ACCIDENT. I NURSED THE BIKE THE LOCAL HARLEY DEALER AND THEY KNEW EXACTLY WHAT THE PROBLEM WAS, ABS CONTROL MODULE FAILURE. IN FACT, A BIKE PULLED OUT AS I WAS THERE WITH THE EXACT SAME PROBLEM. THE PART IS CURRENTLY BACKORDERED SO THEY SENT BOTH US OUT THE DOOR WITH KNOWINGLY FAULTY BRAKES BECAUSE THE PARTS TO FIX IT ARE UNAVAILABLE. I UNDERSTAND PART FAILURES. BUT, THE FAILURE OF THE ABS SYSTEM SHOULD NOT CAUSE A COMPLETE BRAKE FAILURE. THIS COULD HAVE BEEN VERY SERIOUS. A LESSOR EXPERIENCED RIDER WOULD NOT HAVE BEEN ABLE TO AVOID AN ACCIDENT.

THE REAR BRAKE ON MY 2010 HARLEY DAVIDSON FLTRX WITH ABS FAILED. THE REAR BRAKE PEDAL FROZE IN THE UP POSITION, NOT ALLOWING ME TO ENGAGE THE BRAKE. NO MATTER HOW HARD I PUSHED IT WOULD NOT GO DOWN. I WAS TRAVELLING 65 MPH ON THE HIGHWAY AT THE TIME. I RODE HOME USING ONLY THE FRONT BRAKE FOR STOPPING, FORTUNATELY IT DID NOT FAIL ALSO. I TOOK IT IN TO THE LOCAL HARLEY DEALER AND THE TECH TOLD ME THAT A VALVE IN THE HCU HAD GOTTEN STUCK AND IT WOULD BE $700 TO REPAIR. I DID NOT HAVE THE MONEY TO FIX IT SO I TOOK THE BIKE HOME AND IT HAS BEEN PARKED IN THE GARAGE EVER SINCE, UN-REPAIRED. THE BRAKE PEDAL IS STILL LOCKED IN THE UP POSITION IF ANYONE WANTS TO LOOK AT IT.

ON 3/13/2012 I PAID HOLSTEIN'S HARLEY-DAVIDSON FOR SERVICE THAT INCLUDED A 5K SERVICE. HOLSTEIN'S FAILED TO OBSERVE AND REPAIR A BRAKE SWITCH RECALL. ON 7/12/2012, THE BRAKE SWITCH STARTED ON FIRE. ON 7/14/2012 HOLSTEIN'S REFUSED TO REPAIR THE BRAKES AND I HAD IT TOWED TO WERNER CYCLE WORKS FOR REPAIR. HARLEY-DAVIDSON CUSTOMER CARE REFUSED TO REIMBURSE ME FOR REPAIR SINCE WERNER'S IS NOT A HARLEY-DAVIDSON SHOP (FILED CASE # [XXX]). HOLSTEIN'S REFUSED TO REIMBURSE ME EVEN THOUGH THEY VERBALLY ACKNOWLEDGED THAT I PAID FOR A 5K SERVICE CHECK AND THEY SHOULD HAVE REPAIRED THE BRAKE SWITCH. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

2010 HARLEY DAVIDSON ROAD GLIDE CUSTOM (FLTRX) FRONT END SHAKE WHEN MOTORCYCLE IS BETWEEN 38-40 MPH. AIR PRESSURE FOR TIRES AT RECOMMENDED VALUE FROM OWNERS MANUAL. THIS HAS BEEN HAPPENING SINCE I BOUGHT IT. THE MOTORCYCLE HAD 5201 MILES ON IT WHEN I BOUGHT IT. I NOTICED IT SHORTLY AFTER BUYING IT. IT NOW HAS 10,642 MILES ON IT AND STILL DOES IT CONSISTANTLY. *TR

TL* THE CONTACT OWNS A 2010 HARLEY DAVIDSON ROAD GLIDE MOTORCYCLE. THE CONTACT STATED THAT THE THROTTLE CONTROL FAILED AND THE VEHICLE STALLED. THE VEHICLE WAS TAKEN TO THE DEALER, WHO STATED THAT THE THROTTLE CONTROL AND THE PINS FOR THE ENGINE CONTROL MODULE WOULD NEED REPLACING. THE VEHICLE WAS REPAIRED. THE FAILURE MILEAGE WAS 16,000 AND THE CURRENT MILEAGE WAS 16,200. *TR

TL* THE CONTACT OWNS A 2010 HARLEY DAVISON TOUR GLIDE FLTRX MOTORCYCLE. THE CONTACT WAS STARTING THE VEHICLE IN FIRST GEAR WHILE HOLDING THE CLUTCH AND THE VEHICLE ABNORMALLY ACCELERATED FROM 6 TO 12 INCHES. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER WHERE THEY ADJUSTED THE CLUTCH. THE FAILURE PERSISTED. THE FAILURE MILEAGE WAS 1 AND THE CURRENT MILEAGE WAS 3,200.