2000 Daewoo Leganza complaints

CONSUMER RECEIVED A RECALL NOTICE(02V257001) FOR BRAKE HOSE, HOWEVER THERE WAS NO DEALER AVAILABLE TO PERFORM THE RECALL. *JB *TC

THE CONSUMER RECEIVED A RECALL NOTICE(02V257001) REGARDING THE BRAKE HOSE. THERE WAS NO DEALER IN THE AREA TO PERFORM THE RECALL. *JB

THE CONSUMER RECEIVED A RECALL NOTICE(0V4357000) REGARDING THE CAMSHAFT POSITION SENSOR. THERE WAS DEALER AVAILABLE TO PERFORM THE RECALL. *JB

THE CONSUMER WAS UNABLE TO HAVE THE CAM SHAFT POSITION(CMP) SENSOR RECALL 04V357000 PERFORM, BECAUSE ALL THE DEALERSHIP IN THE STATE WERE EITHER OUT OF BUSINESS OR WERE NOT SERVICING THE VEHICLES. *JB *NM

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. THE CONSUMER MADE AN APPOINTMENT OVER THE PHONE TO HAVE THE VEHICLE SERVICED. UPON ARRIVAL, THE CONSUMER WAS TOLD THAT THE VIN OF THE VEHICLE DID NOT FALL WITHIN THOSE SELECTED AND WAS REFUSED SERVICE. *AK *SC

THE VEHICLE'S ENGINE LIGHT CAME ON AND WAS TAKEN IN FOR REPAIR. THE CAMSHAFT SENOR WAS REPLACED. THE CONSUMER INCURRED EXPENSES FOR REPLACEMENT OF COMPONENT PRIOR TO RECEIVING NOTIFICATION OF DAEWOO'S SAFETY RECALL (NHTSA CAMPAIGN NO. 04V-357). THE CONSUMER MAILED THE APPROPRIATE DOCUMENTATION TO THE MANUFACTURER FOR REIMBURSEMENT AND SCHEDULED AN APPOINTMENT WITH AN AUTHORIZED DEALER TO HAVE CORRECTIVE ACTION FOR RECALL PERFORMED. CAMSHAFT 04V357000. *JB *SC

NHTSA RECALL 02V131001 ON THE FMVSS 201/AIR BAG DEPLOYMENT. CONSUMER IS UNABLE TO LOCATE AN AUTHORIZED DEALER TO HONOR THE RECALL. *NM

CONSUMER RECEIVED RECALL 04V3570000 CONCERNING CAM SHAFT SENSOR FAILURE. *AK THE CONSUMER WAS TOLD THE PART THE THAT WAS NEEDED TO FIX THE PROBLEM WAS NOT COVERED UNDER THE RECALL, ALTHOUGH THE RECALL LETTER STATED IT WOULD BE COVERED. *JB

NHTSA RECALL 04V357000 SUBJECT: CAMSHAFT POSITION SENSOR. THE CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *JB

04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: THE VEHICLE'S CHECK ENGINE LIGHT ILLUMINATED WHICH WAS FOLLOWED BY A BURNING SMELL. THE DEALER WAS NOTIFIED. THE DEALER RAN A DIAGNOSTIC CHECK AND DETERMINED THAT THE CMP HAD TO BE REPLACED. THE VEHICLE'S REPAIRS WERE NOT COVER UNDER THE RECALL DUE TO IN. *JB *NM

THE CONSUMER RECEIVED, NHTSA RECALL CAMPAIGN LETTER #04V357000 REGARDING THE CAMSHAFT POSITION SENSOR. THE COMPANY WAS OUT BUSINESS. NO DEALERSHIP AVAILABLE. *JB *SC

CONSUMER HAD TO PAY OUT OF POCKET FOR CAM SHAFT SENSOR RECALL 04V357000.*AK

DEALERSHIP CHARGED THE CONSUMER TO PERFROM THE CAMSHAFT POSITION SENSOR RECALL 04V357000.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR, INSPECTION ONLY, COULD NOT DUPLICATE AT THIS TIME. *BF THE CHECK ENGINE LIGHT WAS ON FOR A LONG TIME. THE VEHICLE STALLED ON THE HIGHWAY. THE FUEL PUMP WAS REPLACED. THE SPEEDOMETER HAD DROPPED DOWN TO 0 THEN CORRECTED ITSELF. THERE WAS A SLIGHT SMELL OF BURNING, THE TEMPERATURE GAUGE WAS TOWARD THE HOT INDICATOR. THE PROBLEM WAS UNABLE TO BE DUPLICATED. *SC *JB

ON SEPTEMBER 15, THE CONSUMER WAS AVAILABLE TO GET IN CONTACT WITH DAEWOO PHONE NUMBER DESCRIBED ON THE NHTSA RECALL# 04V357000. 877-362-1234. THE CONSUMER LEFT A VOICE MAIL AND WAS ANSWER BY DAEWOOD EMPLOYEES SEVERAL HOURS LATER, INDICATING TO HER WHERE TO TAKE THE LEGANZA VEHICLE. THE TWO NEAREST DEALERSHIPS CLOSE TO HER ADDRESS ARE BETWEEN 140 TO 175 MILES FROM HOME. PLEASE PROVIDE FURTHER INFORMATION. *JB CONSUMER WAS TOLD THE CAM SHAFT SENSOR HAD TO BE REPLACED. SHE ALSO COMPLAINED THAT THE SAFETY SWITCH UNDER THE BRAKE PEDAL WAS OUT AND THERE WAS AN OIL LEAK IN FRONT OF THE MOTOR ON THE PASSENGER SIDE. LAST BUT NOT LEAST, IN ORDER TO START THE VEHICLE, THE CONSUMER HAD TO PUT THE IGNITION KEY IN THE SHIFT LOCK SLOT. PUT THE VEHICLE IN NEUTRAL, THEN INSERT THE KEY IN THE IGNITION AND CHANGE THE GEAR. *PH

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER CHARGED CONSUMER FOR THE REPAIRS. *AK THE CHECK ENGINE LIGHT HAD COME ON AND REMAINED ON EVEN AFTER THE SWITCH WAS RESET. *SC

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECA 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 FOR CAM SHAFT POSITION SENSOR. NO CONTACT COULD BE MADE WITH A DEALER. PAYMENT HAD TO BE MADE BY THE CONSUMER TO AN INDEPENDENT MECHANIC. *AK

TIMING BELT FAILURE WHILE DRIVING. CAUSING APPROXIMATELY $1500 DAMAGE TO ENGINE(VALVES). TIMING BELT REPLACED AT REGULAR INTERVAL AS RECOMMEND BY DAEWOO. FAILURE OCCURED AT 84,000 MILES.*AK

CONSUMER STATED DEALER WAS WAITING FOR PARTS FOR RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. *AK

CONSUMER RECEIVED RECALL 04V357000 FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER IS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *AK

CONSUMER RECEIVED RECALL 02V131000 CONCERNIN AIR BAG FAILURE. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 02V131000 CONCERNING AIR BAG FAILURE. DEALER WAS NOT IN OPERATION.*AK

NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

WHILE DRIVING EHICLE STALLED. CONSUMER WAS UNABLE TO RESTART VEHICLE, AND HAD IT TOWED TO THE DEALER FOR INSPECTION. MECHANIC CLAIMED THAT THE PROBLEM CAULD NOT BE DUPLICATED. *AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER HAS TO PAY OUT OF POCKET EXPENSES FOR CAM SHAFT SENSOR RECALL 04V357000.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER TOOK THE VEHICLE TO A DAEWOO DEALERSHIP. CONSUMER WAS TOLD THAT ALTHOUGH THE VIN FELL WITHIN THE RANGE THE PARTS USED TO REPAIR THE DEFECT HAD PART NUMBERS THAT DID NOT INCLUDE THIS VEHICLE, AND DEALERSHIP WAS NOT ALLOWED TO REPAIR THIS VEHICLE, AS PER DAEWOO. *AK

CONSUMER RECEIVED RECALL 0V435700 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE A DEALER IN THE AREA TO HONOR THE RECALL.*AK

NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. NO PARTS WERE AVAILABLE. *AK

THE CHECK ENGINE LIGHT IS ON. NO DEALERS IN THE AREA TO MAKE REPAIRS. CAM SHAFT SENSOR RECALL 04V357000 DEALER REPAIRED TWO VEHICLES AT NO COST FOR OTHER CONSUMERS. THE CONSUMER WAS TOLD HE WOULD HAVE TO PAY.*AK. CONSUMER WAS CHARGED $77.61 WHILE TWO OTHER CONSUMERS WERE NOT CHARGED FOR THE SAME PROBLEM. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER IS UNABLE TO FIND A DAEWOO REPAIR SHOP NOR CONTACT THE NUMBER PROVIDED ON THE DAEWOO RECALL LETTER FOR CUSTOMER SERVICE. *AK

NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE A DEALER IN THE AREA TO HONOR THE RECALL.*AK

CONSUMER RECEIVED RECALL 0V457000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

THE CONSUMER HAD THE CMP SENSOR REPLACED PRIOR TO RECALL NOTIFICATION. THE CONSUMER REQUEST REIMBURSEMENT. *NM

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CAN NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

RECALL 04V357000 HAS WAS FOR THE CAM SHAFT POSITION SENSOR. DEALER REFUSED TO REPAIR THE VEHICLE UNDER THE RECALL. *AK

CONSUMER RECEIVED, NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE IN THE AREA OF MASSACHUSETTS. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CAN NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

WHILE TRYING TO FIND A DEALERSHIP TO PERFORM CAM SHAFT POSITION (CMP) SENSOR RECALL 04V357000 THE ENGINE WENT OUT AND THE TIMING BELT BROKE WHILE DRIVING ON THE PARKWAY. *AK

CONSUMER RECEIVED RECALL 04V35700 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CHECK ENGINE LIGHT IS ON, AND THE VEHICLE SMOKES. THERE IS NO ONE TO MAKE THE REPAIRS. CAM SHAFT SENSOR RECALL 04V357000. *AK