2012 BMW 528Xi

The contact owns a 2012 BMW 528XI. The contact stated that while driving at an undisclosed speed, the vehicle came to a stop and the Automatic START/STOP feature activated; however, the engine failed to restart. The message "Drive Train Malfunction Error" was displayed. The vehicle was towed to the dealer, who determined that the timing chain had fractured, causing unknown parts to enter the engine. The contact was informed that the timing chain needed to be replaced. The vehicle was not repaired. The contact associated the failure with NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the VIN was not included in the recall. The manufacturer was made aware of the failure. The failure mileage was approximately 119,000.

The vehicle suffered a sudden Drivetrain Malfunction and severe engine overheating while driving, resulting in a physically snapped camshaft and extensive iron shaving contamination in the oil pan (catastrophic engine failure).Ten months ago, an authorized dealership performed the official BMW Water Pump Safety Recall (NHTSA Campaign 24V608000). The vehicle has an active history of drivetrain malfunction fault codes dating back to January 2024. The failure of the recall remedy to safely maintain the cooling loop directly caused severe thermal stress and lubrication breakdown, leading to the camshaft fracturing. Additionally, this engine was under the VANOS Bolt Safety Recall (NHTSA Campaign 23V707000), which covers loosening valvetrain bolts known to break camshafts.This is a direct consequential safety failure resulting from defective recall components, causing sudden engine failure while operating on a public roadway. Vehicle is currently held at Fields BMW awaiting corporate inspection.

The contact owns a 2012 BMW 528XI. The contact stated that while driving at various speeds, there was a misfire coming from the engine with the "Drivetrain Malfunction" message displayed. The contact later received a notification for an unknown recall, and a diagnostic test was performed however, no failure was found for the drivetrain. The recall repair was performed. Recently, the contact stated that the vehicle would shut off soon after it was started. The vehicle was taken to an independent mechanic where a diagnostic was performed; the diagnostic test discovered that the camshaft sensor was fractured, and metal shavings were found in the oil pan. The vehicle was then diagnosed with engine failure. The manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 128,900

The contact owns a 2012 BMW 528XI. The vehicle was previously repaired under NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM), but the failure occurred. The contact stated that while driving at an undisclosed speed, the check coolant level warning light illuminated. The vehicle was taken to the dealer. The contact was informed that the recall repair was not yet available. However, the dealer installed a splash seal. The contact notified the manufacturer of the issue, and was referred to contact another dealer since parts for the recall repair were available. The vehicle was taken to a different dealer where the remedy was available, and the contact was informed that the recall was already completed. The vehicle was not repaired. The contact stated that the failure persisted. Most recently, there was smoke coming from the exhaust pipe, and the vehicle vibrated while driving. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was made aware of the issues, and the contact was referred to the local dealer. The contact stated that the dealer had committed fraud since the manufacturer paid for the recall to be completed. Prior to the failure, the contact had replaced the headlamp. The vehicle was taken to the dealer for maintenance, and afterwards, the vehicle was washed, and water entered the headlight and damaged the sensor. The failure mileage was approximately 155,000

Odometer Fraud. The contact purchased a 2012 BMW 528I. The contact stated that while checking the Carfax history report of the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was approximately 138,000; however, the Carfax history report showed that the mileage was approximately 224,000.

The contact owns a 2012 BMW 528XI. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); and the vehicle was taken to the dealer for the recall repair. The contact was informed that the recall repair had been performed. The contact stated that upon driving off the parking lot at the dealer and coming to a complete stop at the traffic light, the message "Drive Train Malfunction - Service to Nearest BMW Dealer as Convenient" was displayed. Additionally, the vehicle was significantly sluggish and failed to respond upon depressing the accelerator pedal. The vehicle was taken back to the dealer, where the contact was informed that the failure could be related to the coolant pump, and the part was not covered under the recall; however, the recall remedy information stated that the dealer would inspect and replace the water pump and plug connector as necessary, and would install a protective shield, free of charge. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 129,000.

See attached document for complaint.

My BMW started leaking fluid 4 months ago. Lights on dash came on one light was the triangle light which engine light. I had it serviced completely oil & filter change hooked up to machine that checks all components senors everything checked out great. One week later I was driving I was coming to a stop my brakes sounded like they were grinding next day had mechanic check the brakes all good. Next day I am pulling out of Attorney Parking lot as I am turning the steering wheel my BMW makes a load screaming cracking noise so I turn my steering wheel up right to drive straight it makes the same noise. I stop to look around my vehicle to see if anything is leaking or dragging nothing was dragging but maybe one or drops of something I touched the solution to feel if it was water or oil? It felt oily so I drove to my mechanic he lifted it up on the racks. We both could see some solution was leaking around possibly where engine oil plug is then we saw it had been leaking back to middle of my vehicle water area and running back to the middle of my vehicle. My mechanic decided to put the machine that checks for certain items on vehicles I know it checks my sensors not sure what else?? He and a couple of the other mechanic stop and help him. I left my vehicle he let me drive his vehicle home he wanted to check other issue tomorrow. Next day I got to the mechanic he said he knew it needed a transfer case and 4 sensors he said it would take time to buy a new transfer case for 2012 BMW 52

Passenger restraint system malfunction warning, many owners have compalined about this, bmw has not issued any recalls but this seams to be a common issue.

The contact owns a 2012 BMW 528XI. The contact stated that the passenger’s side air bag malfunction warning light was illuminated. The local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was contacted, and the contact was informed that there was no recall related to the failure. The contact was referred to the NHTSA Hotline to report the failure. The failure mileage was approximately 62,000.

Adaptive lights and turn signal failure. There seems to be a widespread issue with BMWs across all makes and models. The failure of the turn signal creates a safety hazard in that the car is unable to properly signal a change of lanes or turn at stop signs or stop lights. BMW is aware of this defect but has failed to act.

Issue with water penetration into adaptive headlights (sealed system) while driving lights can shut off and signals are disabled. Potential major safety issue.

Car gave a Drivetrain Malfunction error and I was able to get the car to the mechanic I've used on the car since it was purchased. I was informed this week that there is now debris in the oil from the timing chain.

The engine seized after paying it off I was told the timing chain jumped and hit a valve

Adaptive headlamp failure including daytime lamp failure from loose headlamp seal that allowed water to infiltrate system. The lights go off at anytime while driving.

Car just wouldn't start one day. Drivetrain malfunction warning indicating timing chain replacement. Car just sits in my driveway. Will cost 6 grand to fix. Timing Chain failure probably effected my engine.

While driving my car at about 30 miles per hour the engine suddenly seized up. There was no warning at all. I had it towed to the dealer, Baron BMW in Merriam Kansas. After evaluating the car they determined the engine failed and it was an issue of lack of oil. I had taken the car to this dealer prior to buying the car to make sure there were no problems. After their inspection I went ahead and bought the car. It had 40,528 miles. I had taken it to the same dealer for service for 3 years prior to the engine failure When the engine failed the mileage was 95,444. I talked with the dealer and let them know that I felt BMW should pay for replacement of the engine. They refused to do this so I was stuck with having to pay for another engine. After researching this issue I found out that there numerous issues with the engine and that several people had had the same problem. BMW was aware of this issue and chose not to do a recall as they should have . Instead the went ahead and made the decision to not do the recall and deal with the engine failures when the engines failed . This would be less expensive to do rather than do the recall which they should have done. So what they did was to sell the 528i model and let people drive the cars , knowing that a certain number of cars engines would fail. Since your organization is concerned about safety issues ,shouldn't you have taken some action once you became aware of the engine failure issue I would hope you could consider some kind of

With no prior warning or issues my car displayed a drive train error followed by a low pressure error and immediately lost power. The timing chain blew and destroyed the engine.

The contact owns a 2012 BMW 528XI. The contact stated that while driving at an undisclosed speed, the vehicle lost motive power with the low oil warning light illuminated. The vehicle was towed to an independent mechanic who diagnosed that the timing chain needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 146,000.

While driving on the Grand Central Plwy, Queens, NY, a drive train motification came on and stated to drive moderately, right after the oil light came on. We were near a gas station, and added a quart of oil. The oil light went out, the car started without hesitation. We decided to go home, we got off the highway about a mile out, the car just stopped went into park and could not start again. It would crank over, but not connect. We were on a four lane road, luckily there was no one behind us, it could have been a terrible incident. The car was towed to a BMW dealership in Great Neck, NY and we were told it was either the engine or the timing chain and it was not worth fixing. The car was then towed to my mechanic, who stated there was a technical warning #N20 & N26 regarding the timing issue. Hoping something can be done